Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-magicolor(5)	 SANE Scanner Access Now Easy	     sane-magicolor(5)

NAME
       sane-magicolor -	SANE backend for KONICA	MINOLTA	magicolor scanners

DESCRIPTION
       The  sane-magicolor  backend supports KONICA MINOLTA magicolor scanners
       connected via USB or LAN. Currently, only the magicolor	1690MF	device
       is  supported,  no  other  devices  with	the same scanning protocol are
       known.

SUPPORTED DEVICES
       The following scanner should work with this backend:

       Device Details
       -----------------------------
       Vendor: KONICA MINOLTA
       Model: magicolor	1690MF

CONFIGURATION
       This section describes the backend's configuration  file	 entries.  The
       file is located at:

	      /usr/local/etc/sane.d/magicolor.conf

       For a proper setup, at least one	of the following entries are needed:

	      net autodiscovery
	      net [IP ADDRESS] [DEVICE-ID]
	      usb
	      usb [VENDOR-ID] [DEVICE-ID]

FILES
       /usr/local/etc/sane.d/magicolor.conf
	      The backend configuration	file

       /usr/local/lib/sane/libsane-magicolor.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-magicolor.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable	specifies the list of directories that
	      may contain the configuration file.  Under UNIX, the directories
	      are separated by a colon (`:'), under OS/2, they	are  separated
	      by a semi-colon (`;').  If this variable is not set, the config-
	      uration file is searched in two default directories: first,  the
	      current	working	  directory   (".")   and   then  in  /usr/lo-
	      cal/etc/sane.d.  If the value of the environment	variable  ends
	      with  the	directory separator character, then the	default	direc-
	      tories are searched after	the explicitly specified  directories.
	      For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
	      sult  in	 directories   "/tmp/config",	".",   and   "/usr/lo-
	      cal/etc/sane.d" being searched (in this order).

       SANE_DEBUG_MAGICOLOR
	      If the library was compiled with debug support enabled, this en-
	      vironment	variable controls the debug level  for	this  backend.
	      Higher debug levels increase the verbosity of the	output.

	      Example: export SANE_DEBUG_MAGICOLOR=127

	      To  obtain debug messages	from the backend, set this environment
	      variable before calling your favorite  frontend  (e.g.  xscanim-
	      age).

	      Example: SANE_DEBUG_MAGICOLOR=65 xscanimage

KNOWN BUGS AND RESTRICTIONS
       Large  color  scans  may	 sometimes timeout due to unknown reasons (the
       scanner simply stops returning data)

       Cancelling large	scans may lock up the scanner.

SEE ALSO
       sane(7),
       http://wiki.kainhofer.com/hardware/magicolor_scan

AUTHOR
       Reinhold	Kainhofer <reinhold@kainhofer.com>

				  10 Jan 2011		     sane-magicolor(5)

NAME | DESCRIPTION | SUPPORTED DEVICES | CONFIGURATION | FILES | ENVIRONMENT | KNOWN BUGS AND RESTRICTIONS | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-magicolor&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help