Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-kodak(5)		 SANE Scanner Access Now Easy		 sane-kodak(5)

NAME
       sane-kodak - SANE backend for big Kodak flatbed and ADF scanners

DESCRIPTION
       The  sane-kodak	library	 implements  a	SANE (Scanner Access Now Easy)
       backend which provides access to	large Kodak flatbed and	ADF scanners.

       This document describes backend version	7,  which  shipped  with  SANE
       1.0.21.

SUPPORTED HARDWARE
       This  version  should  support  models  which  speak the	Kodak SCSI and
       Firewire	protocols. The i1860 was used  to  develop  the	 backend,  but
       other  models  may work with only minimal modifications.	Please see the
       list at http://www.sane-project.org/sane-supported-devices.html for  an
       updated list.

       If  you have a machine not on that list,	or reported as 'untested': the
       best way	to determine level of support is to test the scanner directly,
       or  to collect a	trace of the windows driver in action.	Please contact
       the author for help or with test	results.

UNSUPPORTED HARDWARE
       Most of the recent Kodak	consumer or workgroup level machines are based
       on  other chipsets and are not supported	by this	backend. Some of these
       scanners	may be supported by another backend.

OPTIONS
       Effort has been made to expose the basic	hardware options, including:

       source s
	      Selects the source for the scan. Options may include  "Flatbed",
	      "ADF Front", "ADF	Back", "ADF Duplex".

       mode m
	      Selects  the  mode  for the scan.	Options	may include "Lineart",
	      "Halftone", "Gray", and "Color".

       resolution
	      Controls scan resolution.	Available choices may  be  limited  by
	      mode.

       tl-x, tl-y, br-x, br-y
	      Sets scan	area upper left	and lower right	coordinates. These are
	      renamed t, l, x, y by some frontends.

       page-width, page-height
	      Sets paper size. Used by scanner to determine centering of  scan
	      coordinates when using ADF and to	detect double feed errors.

       Other  options will be available	based on the capabilities of the scan-
       ner.  Use 'scanimage --help' to get a list, but be aware	that some  op-
       tions  may  be settable only when another option	has been set, and that
       advanced	options	may be hidden by some frontend programs.

CONFIGURATION FILE
       The configuration file "kodak.conf" is used to tell the backend how  to
       look for	scanners, and provide options controlling the operation	of the
       backend.	 This file is read each	time the frontend asks the backend for
       a  list	of  scanners,  generally only when the frontend	starts.	If the
       configuration file is missing, the backend will use a set  of  compiled
       defaults, which are identical to	the default configuration file shipped
       with SANE.

       Scanners	can be specified in the	configuration file in 2	ways:

       "scsi KODAK"
	      Requests backend to search all scsi busses in the	system	for  a
	      device which reports itself to be	a scanner made by 'KODAK'.

       "scsi /dev/sg0" (or other scsi device file)
	      Requests	backend	 to open the named scsi	device.	Only useful if
	      you have multiple	compatible scanners connected to your  system,
	      and  need	 to  specify one. Probably should not be used with the
	      other "scsi" line	above.

       The only	configuration option supported is "buffer-size=xxx",  allowing
       you  to	set  the number	of bytes in the	data buffer to something other
       than the	compiled-in default, 32768 (32K). Some users report that their
       scanner will "hang" mid-page, or	fail to	transmit the image if the buf-
       fer is not large	enough.

       Note: This option may appear multiple times in the configuration	 file.
       It  only	applies	to scanners discovered by 'scsi/usb' lines that	follow
       this option.

       Note: The backend does not place	an upper bound on this value, as  some
       users  required	it to be quite large. Values above the default are not
       recommended, and	may crash your OS or lockup your scsi card driver. You
       have been warned.

ENVIRONMENT
       The backend uses	a single environment variable, SANE_DEBUG_KODAK, which
       enables debugging output	to stderr. Valid values	are:

	      5	 Errors
	      10 Function trace
	      15 Function detail
	      20 Option	commands
	      25 SCSI trace
	      30 SCSI detail
	      35 Useless noise

KNOWN ISSUES
       Most hardware options are either	not supported or not exposed for  con-
       trol  by	 the  user, including: multifeed detection, image compression,
       autocropping, endorser, iThresholding, multi-stream, etc.

CREDITS
       The various authors of the sane-fujitsu backend provided	useful code.
       Kodak provided access to	hardware, documentation	and personnel.

SEE ALSO
       sane(7),	sane-scsi(5)

AUTHOR
       m. allan	noah: <kitno455	a t gmail d o t	com>

				  10 Feb 2010			 sane-kodak(5)

NAME | DESCRIPTION | SUPPORTED HARDWARE | UNSUPPORTED HARDWARE | OPTIONS | CONFIGURATION FILE | ENVIRONMENT | KNOWN ISSUES | CREDITS | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-kodak&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help