Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
sane(7)                  SANE Scanner Access Now Easy                  sane(7)

NAME
       sane - Scanner Access Now Easy: API for accessing scanners

DESCRIPTION
       SANE is an application programming interface (API) that provides
       standardized access to any raster image scanner hardware. The
       standardized interface makes it possible to write just one driver for
       each scanner device instead of one driver for each scanner and
       application.

       While SANE is primarily targeted at a UNIX environment, the standard
       has been carefully designed to make it possible to implement the API on
       virtually any hardware or operating system.

       This manual page provides a summary of the information available about
       SANE.

       If you have trouble getting your scanner detected, read the PROBLEMS
       section.

TERMINOLOGY
       An application that uses the SANE interface is called a SANE frontend.
       A driver that implements the SANE interface is called a SANE backend.
       A meta backend provides some means to manage one or more other
       backends.

SOFTWARE PACKAGES
       The package `sane-backends' contains a lot of backends, documentation
       (including the SANE standard), networking support, and the command line
       frontend `scanimage'.  The frontends `xscanimage', `xcam', and
       `scanadf' are included in the package `sane-frontends'.  Both packages
       can be downloaded from the SANE homepage
       (http://www.sane-project.org/).  Information about other frontends and
       backends can also be found on the SANE homepage.

GENERAL INFORMATION
       The following sections provide short descriptions and links to more
       information about several aspects of SANE.  A name with a number in
       parenthesis (e.g.  `sane-dll(5)') points to a manual page. In this case
       `man 5 sane-dll' will display the page. Entries like
       `/usr/local/share/doc/sane-backends/sane.tex' are references to text
       files that were copied to the SANE documentation directory
       (/usr/local/share/doc/sane-backends/) during installation. Everything
       else is a URL to a resource on the web.

       SANE homepage
         Information on all aspects of SANE including a tutorial and a link to
         the SANE FAQ can be found on the SANE homepage:
         http://www.sane-project.org/.

       SANE device lists
         The SANE device lists contain information about the status of SANE
         support for a specific device. If your scanner is not listed there
         (either supported or unsupported), please contact us. See section HOW
         CAN YOU HELP SANE for details. There are lists for specific releases
         of SANE, for the current development version and a search engine:
         http://www.sane-project.org/sane-supported-devices.html.  The lists
         are also installed on your system at /usr/local/share/doc/sane-
         backends/.

       SANE mailing list
         There is a mailing list for the purpose of discussing the SANE
         standard and its implementations: sane-devel.  Despite its name, the
         list is not only intended for developers, but also for users. There
         are also some more lists for special topics, however, for users,
         sane-devel is the right list. How to subscribe and unsubscribe:
         http://www.sane-project.org/mailing-lists.html.

       SANE IRC channel
         The IRC (Internet Relay Chat) channel #sane can be found on the
         Freenode network (irc.freenode.net). It's for discussing SANE
         problems, talking about development and general SANE related
         chatting. Before asking for help, please read the other documentation
         mentioned in this manual page. The channel's topic is also used for
         announcements of problems with SANE infrastructure (mailing lists,
         web server, etc.).

       Compiling and installing SANE
         Look at /usr/local/share/doc/sane-backends/README and the os-
         dependent README files for information about compiling and installing
         SANE.

       SCSI configuration
         For information about various systems and SCSI controllers see
         sane-scsi(5).

       USB configuration
         For information about USB configuration see sane-usb(5).

FRONTENDS AND MISCELLANEOUS PROGRAMS
       scanimage
         Command-line frontend. See scanimage(1).

       saned
         SANE network daemon that allows remote clients to access image
         acquisition devices available on the local host. See saned(8).

       sane-find-scanner
         Command-line tool to find SCSI and USB scanners and determine their
         Unix device files. See sane-find-scanner(1).

       Also, have a look at the sane-frontends package (including xscanimage,
       xcam, and scanadf) and the frontend information page at
       http://www.sane-project.org/sane-frontends.html.

BACKENDS FOR SCANNERS
       abaton
         The SANE backend for Abaton flatbed scanners supports the Scan 300/GS
         (8bit, 256 levels of gray) and the Scan 300/S (black and white,
         untested). See sane-abaton(5) for details.

       agfafocus
         This backend supports AGFA Focus scanners and the Siemens S9036
         (untested).  See sane-agfafocus(5) for details.

       apple
         The SANE backend for Apple flatbed scanners supports the following
         scanners: AppleScanner, OneScanner and ColorOneScanner. See
         sane-apple(5) for details.

       artec
         The SANE Artec backend supports several Artec/Ultima SCSI flatbed
         scanners as well as the BlackWidow BW4800SP and the Plustek 19200S.
         See sane-artec(5) for details.

       artec_eplus48u
         The SANE artec_eplus48u backend supports the scanner Artec E+ 48U and
         re-badged models like Tevion MD 9693, Medion MD 9693, Medion MD 9705
         and Trust Easy Webscan 19200. See sane-artec_eplus48u(5) for details.

       as6e
         This is a SANE backend for using the Artec AS6E parallel port
         interface scanner. See sane-as6e(5) for details.

       avision
         This backend supports several Avision based scanners. This includes
         the original Avision scanners (like AV 630, AV 620, ...) as well as
         the HP ScanJet 53xx and 74xx series, Fujitsu ScanPartner, some
         Mitsubishi and Minolta film-scanners.  See sane-avision(5) for
         details.

       bh
         The bh backend provides access to Bell+Howell Copiscan II series
         document scanners. See sane-bh(5) for details.

       canon
         The canon backend supports the CanoScan 300, CanoScan 600, and
         CanoScan 2700F SCSI flatbed scanners. See sane-canon(5) for details.

       canon630u
         The canon630u backend supports the CanoScan 630u and 636u USB
         scanners.  See sane-canon630u(5) for details.

       canon_dr
         The canon_dr backend supports the Canon DR-Series ADF SCSI and USB
         scanners. See sane-canon_dr(5) for details.

       canon_pp
         The canon_pp backend supports the CanoScan FB330P, FB630P, N340P and
         N640P parallel port scanners.  See sane-canon_pp(5) for details.

       cardscan
         This backend provides support for Corex Cardscan USB scanners. See
         sane-cardscan(5) for details.

       coolscan
         This is a SANE backend for Nikon Coolscan film-scanners. See
         sane-coolscan(5) for details.

       coolscan2
         This is a SANE backend for Nikon Coolscan film-scanners.  See
         sane-coolscan2(5) or http://coolscan2.sourceforge.net for details.

       epjitsu
         The epjitsu backend provides support for Epson-based Fujitsu USB
         scanners. See sane-epjitsu(5) for details.

       epson
         The SANE epson backend provides support for Epson SCSI, parallel port
         and USB flatbed scanners. See sane-epson(5) for details.

       fujitsu
         The fujitsu backend provides support for most Fujitsu SCSI and USB,
         flatbed and adf scanners. See sane-fujitsu(5) for details.

       genesys
         The genesys backend provides support for several scanners based on
         the Genesys Logic GL646, GL841, GL843, GL847 and GL124 chips like the
         Medion 6471 and Hewlett-Packard 2300c.
          See sane-genesys(5) for details.

       gt68xx
         The gt68xx backend provides support for scanners based on the
         Grandtech GT-6801 and GT-6816 chips like the Artec Ultima 2000 and
         several Mustek BearPaw CU and TA models. Some Genius, Lexmark,
         Medion, Packard Bell, Plustek, and Trust scanners are also supported.
         See sane-gt68xx(5) for details.

       hp
         The SANE hp backend provides access to Hewlett-Packard ScanJet
         scanners which support SCL (Scanner Control Language by HP). See
         sane-hp(5) for details.

       hpsj5s
         The SANE backend for the Hewlett-Packard ScanJet 5S scanner. See
         sane-hpsj5s(5) for details.

       hp3500
         The SANE backend for the Hewlett-Packard ScanJet 3500 series. See
         sane-hp3500(5) for details.

       hp3900
         The SANE backend for the Hewlett-Packard ScanJet 3900 series. See
         sane-hp3900(5) for details.

       hp4200
         The SANE backend for the Hewlett-Packard ScanJet 4200 series. See
         sane-hp4200(5) for details.

       hp5400
         The SANE backend for the Hewlett-Packard ScanJet 54XXC series. See
         sane-hp5400(5) for details.

       hpljm1005
         The SANE backend for the Hewlett-Packard LaserJet M1005 scanner. See
         sane-hpljm1005(5) for details.

       hs2p
         The SANE backend for the Ricoh IS450 family of SCSI scanners. See
         sane-hs2p(5) for details.

       ibm
         The SANE backend for some IBM and Ricoh SCSI scanners. See
         sane-ibm(5) for details.

       kodak
         The SANE backend for some large Kodak scanners. See sane-kodak(5) for
         details.

       kodakaio
         The SANE backend for Kodak AiO printer/scanners. See sane-kodakaio(5)
         for details.

       kvs1025
         The SANE backend for Panasonic KV-S102xC scanners. See
         sane-kvs1025(5) for details.

       leo
         This backend supports the Leo S3 and the Across FS-1130, which is a
         re-badged LEO FS-1130 scanner. See sane-leo(5) for details.

       lexmark
         This backend supports the Lexmark X1100 series of USB scanners. See
         sane-lexmark(5) for details.

       ma1509
         The ma1509 backend supports the Mustek BearPaw 1200F USB flatbed
         scanner. See sane-ma1509(5) for details.

       magicolor
         The magicolor backend supports the KONICA MINOLTA magicolor 1690MF
         multi-function printer/scanner/fax. See sane-magicolor(5) for
         details.

       matsushita
         This backend supports some Panasonic KVSS high speed scanners. See
         sane-matsushita(5) for details.

       microtek
         The microtek backend provides access to the "second generation"
         Microtek scanners with SCSI-1 command set. See sane-microtek(5) for
         details.

       microtek2
         The microtek2 backend provides access to some Microtek scanners with
         a SCSI-2 command set. See sane-microtek2(5) for details.

       mustek
         The SANE mustek backend supports most Mustek SCSI flatbed scanners
         including the Paragon and ScanExpress series and the 600 II N and 600
         II EP (non-SCSI). Some Trust scanners are also supported. See
         sane-mustek(5) for details.

       mustek_pp
         The mustek_pp backend provides access to Mustek parallel port flatbed
         scanners. See sane-mustek_pp(5) for details.

       mustek_usb
         The mustek_usb backend provides access to some Mustek ScanExpress USB
         flatbed scanners. See sane-mustek_usb(5) for details.

       mustek_usb2
         The mustek_usb2 backend provides access to scanners using the SQ113
         chipset like the Mustek BearPaw 2448 TA Pro USB flatbed scanner. See
         sane-mustek_usb2(5) for details.

       nec
         The SANE nec backend supports the NEC PC-IN500/4C SCSI scanner. See
         sane-nec(5) for details.

       niash
         The niash backend supports the Agfa Snapscan Touch and the HP ScanJet
         3300c, 3400c, and 4300c USB flatbed scanners. See sane-niash(5) for
         details.

       p5
         The SANE backend for Primax PagePartner. See sane-p5(5) for details.

       pie
         The pie backend provides access to Pacific Image Electronics (PIE)
         and Devcom SCSI flatbed scanners. See sane-pie(5) for details.

       pixma
         The pixma backend supports Canon PIXMA MP series (multi-function
         devices). See sane-pixma(5) or http://home.arcor.de/wittawat/pixma/
         for details.

       plustek
         The SANE plustek backend supports USB flatbed scanners that use the
         National Semiconductor LM983[1/2/3]-chipset aka Merlin. Scanners
         using this LM983x chips include some models from Plustek, KYE/Genius,
         Hewlett-Packard, Mustek, Umax, Epson, and Canon. See sane-plustek(5)
         for details.

       plustek_pp
         The SANE plustek_pp backend supports Plustek parallel port flatbed
         scanners.  Scanners using the Plustek ASIC P96001, P96003, P98001 and
         P98003 include some models from Plustek, KYE/Genius, Primax. See
         sane-plustek_pp(5) for details.

       ricoh
         The ricoh backend provides access to the following Ricoh flatbed
         scanners: IS50 and IS60. See sane-ricoh(5) for details.

       s9036
         The s9036 backend provides access to Siemens 9036 flatbed scanners.
         See sane-s9036(5) for details.

       sceptre
         The sceptre backend provides access to the Sceptre S1200 flatbed
         scanner. See sane-sceptre(5) for details.

       sharp
         The SANE sharp backend supports Sharp SCSI scanners. See
         sane-sharp(5) for details.

       sm3600
         The SANE sm3600 backend supports the Microtek ScanMaker 3600 USB
         scanner. See sane-sm3600(5) for details.

       sm3840
         The SANE sm3840 backend supports the Microtek ScanMaker 3840 USB
         scanner.  See sane-sm3840(5) for details.

       snapscan
         The snapscan backend supports AGFA SnapScan flatbed scanners. See
         sane-snapscan(5) for details.

       sp15c
         This backend supports the Fujitsu FCPA ScanPartner 15C flatbed
         scanner. See sane-sp15c(5) for details.

       st400
         The sane-st400 backend provides access to Siemens ST400 and ST800.
         See sane-st400(5) for details.

       tamarack
         The SANE tamarack backend supports Tamarack Artiscan flatbed
         scanners. See sane-tamarack(5) for details.

       teco1 teco2 teco3
         The SANE teco1, teco2 and teco3 backends support some TECO scanners,
         usually sold under the Relisys, Trust, Primax, Piotech, Dextra names.
         See sane-teco1(5), sane-teco2(5) and sane-teco3(5) for details.

       u12
         The sane-u12 backend provides USB flatbed scanners based on Plustek's
         ASIC 98003 (parallel-port ASIC) and a GeneSys Logics' USB-parport
         bridge chip like the Plustek OpticPro U(T)12. See sane-u12(5) for
         details.

       umax
         The sane-umax backend provides access to several UMAX-SCSI-scanners
         and some Linotype Hell SCSI-scanners. See sane-umax(5) for details.

       umax_pp
         The sane-umax_pp backend provides access to Umax parallel port
         flatbed scanners and the HP 3200C. See sane-umax_pp(5) for details.

       umax1200u
         The sane-umax1220u backend supports the UMAX Astra 1220U (USB)
         flatbed scanner (and also the UMAX Astra 2000U, sort of). See
         sane-umax1220u(5) for details.

       Also, have a look at the backend information page at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/local/share/doc/sane-backends/PROJECTS.

BACKENDS FOR DIGITAL CAMERAS
       dc210
         Backend for Kodak DC210 Digital Camera. See sane-dc210(5).

       dc240
         Backend for Kodak DC240 Digital Camera. See sane-dc240(5).

       dc25
         Backend for Kodak DC20/DC25 Digital Cameras. See sane-dc25(5).

       dmc
         Backend for the Polaroid Digital Microscope Camera. See sane-dmc(5).

       gphoto2
         Backend for digital cameras supported by the gphoto2 library package.
         (See http://www.gphoto.org for more information and a list of
         supported cameras.)  Gphoto2 supports over 140 different camera
         models.  However, please note that more development and testing is
         needed before all of these cameras will be supported by SANE backend.
         See sane-gphoto2(5).

       qcam
         Backend for Connectix QuickCam cameras. See sane-qcam(5).

       stv680
         The sane-st680 backend provides access to webcams with a stv680 chip.
         See sane-st680(5) for details.

       Also, have a look at the backend information page at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/local/share/doc/sane-backends/PROJECTS.

MISCELLANEOUS BACKENDS
       dll
         The sane-dll library implements a SANE backend that provides access
         to an arbitrary number of other SANE backends by dynamic loading. See
         sane-dll(5).

       net
         The SANE network daemon saned provides access to scanners located on
         different computers in connection with the net backend. See
         sane-net(5) and saned(8).

       pnm
         PNM image reader pseudo-backend. The purpose of this backend is
         primarily to aid in debugging of SANE frontends. See sane-pnm(5).

       pint
         Backend for scanners that use the PINT (Pint Is Not Twain) device
         driver.  The PINT driver is being actively developed on the OpenBSD
         platform, and has been ported to a few other *nix-like operating
         systems. See sane-pint(5).

       test
         The SANE test backend is for testing frontends and the SANE
         installation.  It provides test pictures and various test options.
         See sane-test(5).

       v4l
         The sane-v4l library implements a SANE backend that provides generic
         access to video cameras and similar equipment using the V4L (Video
         for Linux) API. See sane-v4l(5).

       Also, have a look at the backend information page at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/local/share/doc/sane-backends/PROJECTS.

CHANGING THE TOP-LEVEL BACKEND
       By default, all SANE backends (drivers) are loaded dynamically by the
       sane-dll meta backend. If you have any questions about the dynamic
       loading, read sane-dll(5).  SANE frontend can also be linked to other
       backends directly by copying or linking a backend to libsane.so in
       /usr/local/lib/sane.

DEVELOPER'S DOCUMENTATION
       It's not hard to write a SANE backend. It can take some time, however.
       You should have basic knowledge of C and enough patience to work
       through the documentation and find out how your scanner works. Appended
       is a list of some documents that help to write backends and frontends.

       The SANE standard defines the application programming interface (API)
       that is used to communicate between frontends and backends. It can be
       found at /usr/local/share/doc/sane-backends/sane.ps (if latex is
       installed on your system) and on the SANE website:
       http://www.sane-project.org/html/ (HTML), or
       http://www.sane-project.org/sane.ps (Postscript).

       There is some more information for programmers in
       /usr/local/share/doc/sane-backends/backend-writing.txt.  Most of the
       internal SANE routines (sanei) are documented using doxygen:
       http://www.sane-project.org/sanei/.  Before a new backend or frontend
       project is started, have a look at
       /usr/local/share/doc/sane-backends/PROJECTS for projects that are
       planned or not yet included into the SANE distribution and at our bug-
       tracking system: http://www.http://www.sane-project.org/bugs.html.

       There are some links on how to find out about the protocol of a
       scanner: http://www.meier-geinitz.de/sane/misc/develop.html.

       If you start writing a backend or frontend or any other part of SANE,
       please contact the sane-devel mailing list for coordination so the same
       work isn't done twice.

FILES
       /usr/local/etc/sane.d/*.conf
              The backend configuration files.

       /usr/local/lib/sane/libsane-*.a
              The static libraries implementing the backends.

       /usr/local/lib/sane/libsane-*.so
              The shared libraries implementing the backends (present on
              systems that support dynamic loading).

       /usr/local/share/doc/sane-backends/*
              SANE documentation: The standard, READMEs, text files for
              backends etc.

PROBLEMS
       If your device isn't found but you know that it is supported, make sure
       that it is detected by your operating system. For SCSI and USB
       scanners, use the sane-find-scanner tool (see sane-find-scanner(1) for
       details). It prints one line for each scanner it has detected and some
       comments (#). If sane-find-scanner finds your scanner only as root but
       not as normal user, the permissions for the device files are not
       adjusted correctly. If the scanner isn't found at all, the operating
       system hasn't detected it and may need some help. Depending on the type
       of your scanner, read sane-usb(5) or sane-scsi(5).  If your scanner (or
       other device) is not connected over the SCSI bus or USB, read the
       backend's manual page for details on how to set it up.

       Now your scanner is detected by the operating system but not by SANE?
       Try scanimage -L.  If the scanner is not found, check that the
       backend's name is mentioned in /usr/local/etc/sane.d/dll.conf.  Some
       backends are commented out by default. Remove the comment sign for your
       backend in this case. Also some backends aren't compiled at all if one
       of their prerequisites are missing. Examples include dc210, dc240,
       canon_pp, hpsj5s, gphoto2, pint, qcam, v4l, net, sm3600, snapscan, pnm.
       If you need one of these backends and they aren't available, read the
       build instructions in the README file and the individual manual pages
       of the backends.

       Another reason for not being detected by scanimage -L may be a missing
       or wrong configuration in the backend's configuration file. While SANE
       tries to automatically find most scanners, some can't be setup
       correctly without the intervention of the administrator. Also on some
       operating systems auto-detection may not work. Check the backend's
       manual page for details.

       If your scanner is still not found, try setting the various environment
       variables that are available to assist in debugging.  The environment
       variables are documented in the relevant manual pages.  For example, to
       get the maximum amount of debug information when testing a Mustek SCSI
       scanner, set environment variables SANE_DEBUG_DLL, SANE_DEBUG_MUSTEK,
       and SANE_DEBUG_SANEI_SCSI to 128 and then invoke scanimage -L .  The
       debug messages for the dll backend tell if the mustek backend was found
       and loaded at all. The mustek messages explain what the mustek backend
       is doing while the SCSI debugging shows the low level handling. If you
       can't find out what's going on by checking the messages carefully,
       contact the sane-devel mailing list for help (see REPORTING BUGS
       below).

       Now that your scanner is found by scanimage -L, try to do a scan:
       scanimage >image.pnm.  This command starts a scan for the default
       scanner with default settings. All the available options are listed by
       running scanimage --help.  If scanning aborts with an error message,
       turn on debugging as mentioned above. Maybe the configuration file
       needs some tuning, e.g. to setup the path to a firmware that is needed
       by some scanners. See the backend's manual page for details. If you
       can't find out what's wrong, contact sane-devel.

       To check that the SANE libraries are installed correctly you can use
       the test backend, even if you don't have a scanner or other SANE
       device:

              scanimage -d test -T

       You should get a list of PASSed tests. You can do the same with your
       backend by changing "test" to your backend's name.

       So now scanning with scanimage works and you want to use one of the
       graphical frontends like xsane, xscanimage, or quiteinsane but those
       frontends don't detect your scanner? One reason may be that you
       installed two versions of SANE.  E.g. the version that was installed by
       your distribution in /usr and one you installed from source in
       /usr/local/.  Make sure that only one version is installed. Another
       possible reason is, that your system's dynamic loader can't find the
       SANE libraries. For Linux, make sure that /etc/ld.so.conf contains
       /usr/local/lib and does not contain /usr/local/lib/sane.  See also the
       documentation of the frontends.

HOW CAN YOU HELP SANE
       We appreciate any help we can get. Please have a look at our web page
       about contributing to SANE: http://www.sane-project.org/contrib.html

CONTACT
       For reporting bugs or requesting new features, please use our bug-
       tracking system: http://www.sane-project.org/bugs.html.  You can also
       contact the author of your backend directly. Usually the email address
       can be found in the /usr/local/share/doc/sane-backends/AUTHORS file or
       the backend's manpage. For general discussion about SANE, please use
       the SANE mailing list sane-devel (see
       http://www.sane-project.org/mailing-lists.html for details).

SEE ALSO
       saned(8), sane-find-scanner(1), scanimage(1), sane-abaton(5),
       sane-agfafocus(5), sane-apple(5), sane-artec(5),
       sane-artec_eplus48u(5), sane-as6e(5), sane-avision(5), sane-bh(5),
       sane-canon(5), sane-canon630u(5), sane-canon_dr(5), sane-canon_pp(5),
       sane-cardscan(5), sane-coolscan2(5), sane-coolscan(5), sane-dc210(5),
       sane-dc240(5), sane-dc25(5), sane-dll(5), sane-dmc(5), sane-epson(5),
       sane-fujitsu(5), sane-genesys(5), sane-gphoto2(5), sane-gt68xx(5),
       sane-hp(5), sane-hpsj5s(5), sane-hp3500(5), sane-hp3900(5),
       sane-hp4200(5), sane-hp5400(5), sane-hpljm1005(5), sane-ibm(5),
       sane-kodak(5), sane-leo(5), sane-lexmark(5), sane-ma1509(5),
       sane-matsushita(5), sane-microtek2(5), sane-microtek(5),
       sane-mustek(5), sane-mustek_pp(5), sane-mustek_usb(5),
       sane-mustek_usb2(5), sane-nec(5), sane-net(5), sane-niash(5),
       sane-pie(5), sane-pint(5), sane-plustek(5), sane-plustek_pp(5),
       sane-pnm(5), sane-qcam(5), sane-ricoh(5), sane-s9036(5),
       sane-sceptre(5), sane-scsi(5), sane-sharp(5), sane-sm3600(5),
       sane-sm3840(5), sane-snapscan(5), sane-sp15c(5), sane-st400(5),
       sane-stv680(5), sane-tamarack(5), sane-teco1(5), sane-teco2(5),
       sane-teco3(5), sane-test(5), sane-u12(5), sane-umax1220u(5),
       sane-umax(5), sane-umax_pp(5), sane-usb(5), sane-v4l(5)

AUTHOR
       David Mosberger-Tang and many many more (see
       /usr/local/share/doc/sane-backends/AUTHORS for details).  This man page
       was written by Henning Meier-Geinitz. Quite a lot of text was taken
       from the SANE standard, several man pages, and README files.

                                  14 Jul 2008                          sane(7)

NAME | DESCRIPTION | TERMINOLOGY | SOFTWARE PACKAGES | GENERAL INFORMATION | FRONTENDS AND MISCELLANEOUS PROGRAMS | BACKENDS FOR SCANNERS | BACKENDS FOR DIGITAL CAMERAS | MISCELLANEOUS BACKENDS | CHANGING THE TOP-LEVEL BACKEND | DEVELOPER'S DOCUMENTATION | FILES | PROBLEMS | HOW CAN YOU HELP SANE | CONTACT | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane&sektion=7&manpath=FreeBSD+10.2-RELEASE+and+Ports>

home | help