Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
S_SERVER(1)                         OpenSSL                        S_SERVER(1)

N
       s_server - SSL/TLS server program

S
       ooppeennssssll ss_sseerrvveerr [--aacccceepptt ppoorrtt] [--ccoonntteexxtt iidd] [--vveerriiffyy ddeepptthh] [--VVeerriiffyy
       ddeepptthh] [--cceerrtt ffiilleennaammee] [--kkeeyy kkeeyyffiillee] [--ddcceerrtt ffiilleennaammee] [--ddkkeeyy kkeeyy--
       ffiillee] [--ddhhppaarraamm ffiilleennaammee] [--nnbbiioo] [--nnbbiioo_tteesstt] [--ccrrllff] [--ddeebbuugg] [--mmssgg]
       [--ssttaattee] [--CCAAppaatthh ddiirreeccttoorryy] [--CCAAffiillee ffiilleennaammee] [--nnoocceerrtt] [--cciipphheerr
       cciipphheerrlliisstt] [--qquuiieett] [--nnoo_ttmmpp_rrssaa] [--ssssll22] [--ssssll33] [--ttllss11] [--nnoo_ssssll22]
       [--nnoo_ssssll33] [--nnoo_ttllss11] [--nnoo_ddhhee] [--bbuuggss] [--hhaacckk] [--wwwwww] [--WWWWWW] [--HHTTTTPP]
       [--eennggiinnee iidd] [--rraanndd file((ss))]

D
       The ss_sseerrvveerr command implements a generic SSL/TLS server which listens
       for connections on a given port using SSL/TLS.

O
       --aacccceepptt ppoorrtt
           the TCP port to listen on for connections. If not specified 4433 is
           used.

       --ccoonntteexxtt iidd
           sets the SSL context id. It can be given any string value. If this
           option is not present a default value will be used.

       --cceerrtt cceerrttnnaammee
           The certificate to use, most servers cipher suites require the use
           of a certificate and some require a certificate with a certain pub-
           lic key type: for example the DSS cipher suites require a certifi-
           cate containing a DSS (DSA) key. If not specified then the filename
           "server.pem" will be used.

       --kkeeyy kkeeyyffiillee
           The private key to use. If not specified then the certificate file
           will be used.

       --ddcceerrtt ffiilleennaammee, --ddkkeeyy kkeeyynnaammee
           specify an additional certificate and private key, these behave in
           the same manner as the --cceerrtt and --kkeeyy options except there is no
           default if they are not specified (no additional certificate and
           key is used). As noted above some cipher suites require a certifi-
           cate containing a key of a certain type. Some cipher suites need a
           certificate carrying an RSA key and some a DSS (DSA) key. By using
           RSA and DSS certificates and keys a server can support clients
           which only support RSA or DSS cipher suites by using an appropriate
           certificate.

       --nnoocceerrtt
           if this option is set then no certificate is used. This restricts
           the cipher suites available to the anonymous ones (currently just
           anonymous DH).

       --ddhhppaarraamm ffiilleennaammee
           the DH parameter file to use. The ephemeral DH cipher suites gener-
           ate keys using a set of DH parameters. If not specified then an
           attempt is made to load the parameters from the server certificate
           file. If this fails then a static set of parameters hard coded into
           the s_server program will be used.

       --nnoo_ddhhee
           if this option is set then no DH parameters will be loaded effec-
           tively disabling the ephemeral DH cipher suites.

       --nnoo_ttmmpp_rrssaa
           certain export cipher suites sometimes use a temporary RSA key,
           this option disables temporary RSA key generation.

       --vveerriiffyy ddeepptthh, --VVeerriiffyy ddeepptthh
           The verify depth to use. This specifies the maximum length of the
           client certificate chain and makes the server request a certificate
           from the client. With the --vveerriiffyy option a certificate is requested
           but the client does not have to send one, with the --VVeerriiffyy option
           the client must supply a certificate or an error occurs.

       --CCAAppaatthh ddiirreeccttoorryy
           The directory to use for client certificate verification. This
           directory must be in "hash format", see vveerriiffyy for more informa-
           tion. These are also used when building the server certificate
           chain.

       --CCAAffiillee ffiillee
           A file containing trusted certificates to use during client authen-
           tication and to use when attempting to build the server certificate
           chain. The list is also used in the list of acceptable client CAs
           passed to the client when a certificate is requested.

       --ssttaattee
           prints out the SSL session states.

       --ddeebbuugg
           print extensive debugging information including a hex dump of all
           traffic.

       --mmssgg
           show all protocol messages with hex dump.

       --nnbbiioo_tteesstt
           tests non blocking I/O

       --nnbbiioo
           turns on non blocking I/O

       --ccrrllff
           this option translated a line feed from the terminal into CR+LF.

       --qquuiieett
           inhibit printing of session and certificate information.

       --ssssll22, --ssssll33, --ttllss11, --nnoo_ssssll22, --nnoo_ssssll33, --nnoo_ttllss11
           these options disable the use of certain SSL or TLS protocols. By
           default the initial handshake uses a method which should be compat-
           ible with all servers and permit them to use SSL v3, SSL v2 or TLS
           as appropriate.

       --bbuuggss
           there are several known bug in SSL and TLS implementations. Adding
           this option enables various workarounds.

       --hhaacckk
           this option enables a further workaround for some some early
           Netscape SSL code (?).

       --cciipphheerr cciipphheerrlliisstt
           this allows the cipher list used by the server to be modified.
           When the client sends a list of supported ciphers the first client
           cipher also included in the server list is used. Because the client
           specifies the preference order, the order of the server cipherlist
           irrelevant. See the cciipphheerrss command for more information.

       --wwwwww
           sends a status message back to the client when it connects. This
           includes lots of information about the ciphers used and various
           session parameters.  The output is in HTML format so this option
           will normally be used with a web browser.

       --WWWWWW
           emulates a simple web server. Pages will be resolved relative to
           the current directory, for example if the URL
           https://myhost/page.html is requested the file ./page.html will be
           loaded.

       --HHTTTTPP
           emulates a simple web server. Pages will be resolved relative to
           the current directory, for example if the URL
           https://myhost/page.html is requested the file ./page.html will be
           loaded. The files loaded are assumed to contain a complete and cor-
           rect HTTP response (lines that are part of the HTTP response line
           and headers must end with CRLF).

       --eennggiinnee iidd
           specifying an engine (by it's unique iidd string) will cause ss_sseerrvveerr
           to attempt to obtain a functional reference to the specified
           engine, thus initialising it if needed. The engine will then be set
           as the default for all available algorithms.

       --rraanndd file((ss))
           a file or files containing random data used to seed the random num-
           ber generator, or an EGD socket (see RAND_egd(3)).  Multiple files
           can be specified separated by a OS-dependent character.  The sepa-
           rator is ;; for MS-Windows, ,, for OpenVMS, and :: for all others.

C
       If a connection request is established with an SSL client and neither
       the --wwwwww nor the --WWWWWW option has been used then normally any data
       received from the client is displayed and any key presses will be sent
       to the client.

       Certain single letter commands are also recognized which perform spe-
       cial operations: these are listed below.

       qq   end the current SSL connection but still accept new connections.

       QQ   end the current SSL connection and exit.

       rr   renegotiate the SSL session.

       RR   renegotiate the SSL session and request a client certificate.

       PP   send some plain text down the underlying TCP connection: this
           should cause the client to disconnect due to a protocol violation.

       SS   print out some session cache status information.

N
       ss_sseerrvveerr can be used to debug SSL clients. To accept connections from a
       web browser the command:

        openssl s_server -accept 443 -www

       can be used for example.

       Most web browsers (in particular Netscape and MSIE) only support RSA
       cipher suites, so they cannot connect to servers which don't use a cer-
       tificate carrying an RSA key or a version of OpenSSL with RSA disabled.

       Although specifying an empty list of CAs when requesting a client cer-
       tificate is strictly speaking a protocol violation, some SSL clients
       interpret this to mean any CA is acceptable. This is useful for debug-
       ging purposes.

       The session parameters can printed out using the sseessss_iidd program.

B
       Because this program has a lot of options and also because some of the
       techniques used are rather old, the C source of s_server is rather hard
       to read and not a model of how things should be done. A typical SSL
       server program would be much simpler.

       The output of common ciphers is wrong: it just gives the list of
       ciphers that OpenSSL recognizes and the client supports.

       There should be a way for the ss_sseerrvveerr program to print out details of
       any unknown cipher suites a client says it supports.

S
       sess_id(1), s_client(1), ciphers(1)

3rd Berkeley Distribution           0.9.7a                         S_SERVER(1)

N | S | D | O | C | N | B | S

Want to link to this manual page? Use this URL:
<
https://www.freebsd.org/cgi/man.cgi?query=s_server&sektion=1&manpath=FreeBSD+4.11-RELEASE>

home | help