Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
rtprio(2)		      System Calls Manual		     rtprio(2)

NAME
       rtprio -	change or read real-time priority

SYNOPSIS
DESCRIPTION
       The system call sets or reads the real-time priority of a process.

       If  pid is zero,	it specifies the calling process; otherwise, it	speci-
       fies the	process	ID of a	process.

       If the process pid contains more	 than  one  thread  or	a  lightweight
       process	(that  is, the process is multi-threaded), this	function shall
       only change the process scheduling  policy  and	priority.   Individual
       threads	or  lightweight	processes in the target	process	shall not have
       their scheduling	policies and priorities	modified.  Note	 that  if  the
       target  process	is  multi-threaded, this process scheduling policy and
       priority	change will only affect	a child	process	that is	created	 later
       and inherits its	parent's scheduling policy and priority.  The priority
       returned	is the value of	the target's old priority,  though  individual
       threads	or  lightweight	 processes  may	have a different value if some
       other interface is used to change an individual thread  or  lightweight
       processes priority.

       When setting the	real-time priority of another process, the real	or ef-
       fective user ID of the calling process must match  the  real  or	 saved
       user  ID	of the process to be modified, or the effective	user ID	of the
       calling process must be that of a user having  appropriate  privileges.
       The calling process must	also be	a member of a privilege	group allowing
       (see getprivgrp(2)) or the effective user ID  of	 the  calling  process
       must be a user having appropriate privileges.

       Simply reading real-time	priorities requires no special privilege.

       Real-time  scheduling  policies differ from normal timesharing policies
       in that the real-time priority is used to absolutely  order  all	 real-
       time  processes.	  This	priority is not	degraded over time.  All real-
       time processes are of higher priority than normal user and system  pro-
       cesses, although	some system processes may run at real-time priorities.
       If there	are several eligible processes at  the	same  priority	level,
       they  are  run  in  a  round robin fashion as long as no	process	with a
       higher priority intervenes.  A real-time	process	receives  CPU  service
       until  it  either  voluntarily  gives  up  the CPU or is	preempted by a
       process of equal	or higher priority.  Interrupts	 can  also  preempt  a
       real-time process.

       Valid  real-time	 priorities run	from zero to 127.  Zero	is the highest
       (most important)	priority.  This	real-time priority is inherited	across
       forks (see fork(2)) and execs (see exec(2)).

       prio can	have the following values:

	      Set the process to this real-time	priority.

	      Do not change the	real-time priority.
				  This	is  used to read the process real-time
				  priority.

	      Set the process to no longer have	a real-time priority.
				  It resumes a normal timesharing priority.

				  Any process, regardless of privilege,	is al-
				  lowed	to turn	off its	own real-time priority
				  using	a pid of zero.

RETURN VALUE
       returns the following values:

	      The process was a	real-time process.
				  The value is the  process's  former  (before
				  the call) real-time priority.

	      The process was not a real-time process.

	      An error occurred.  is set to indicate the error.

ERRORS
       If fails, is set	to one of the following	values:

	      [EINVAL]		  prio is not or in the	range 0	to 127.

	      [EPERM]		  The calling process is not a user having ap-
				  propriate privileges,	and neither  its  real
				  nor  effective  user	ID  match  the real or
				  saved	user ID	of the	process	 indicated  by
				  pid.

	      [EPERM]		  The group access list	of the calling process
				  does not contain a group  having  capability
				  and prio is not or with a pid	of zero.

	      [ESRCH]		  No  process  can  be	found corresponding to
				  that specified by pid.

EXAMPLES
       The following call to sets the calling process to a real-time  priority
       of 90:

WARNINGS
       Normally, compute-bound programs	should not be run at real-time priori-
       ties, because all timesharing work on the CPU would come	to a  complete
       halt.

DEPENDENCIES
   Series 800
       Because	processes  executing  at  real-time  priorities	get scheduling
       preference over a system	process	executing at a lower  priority,	 unex-
       pected  system behavior can occur after a power failure on systems that
       support power-fail recovery.  For example, when (see init(1M)) receives
       the  powerfail signal it	normally reloads programmable hardware such as
       terminal	multiplexers.  If a higher-priority real-time process is  eli-
       gible  to run after the power failure, the running of is	delayed.  This
       condition temporarily prevents terminal input to	any process, including
       real-time  shells  of  higher  priority	than  the  eligible  real-time
       process.	 To avoid this situation, a real-time process should catch and
       suspend itself until has	finished its powerfail processing.

AUTHOR
       was developed by	HP.

SEE ALSO
       rtprio(1), getprivgrp(2), nice(2), plock(2).

								     rtprio(2)

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | EXAMPLES | WARNINGS | DEPENDENCIES | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=rtprio&sektion=2&manpath=HP-UX+11.22>

home | help