# FreeBSD Manual Pages

RRDGRAPH_RPN(1) rrdtool RRDGRAPH_RPN(1)NAMErrdgraph_rpn - About RPN Math in rrdtool graphSYNOPSISRPNexpression:=vname|operator|value[,RPNexpression]DESCRIPTIONIf you have ever used a traditional HP calculator you already knowRPN. The idea behindRPNis that you have a stack and push your data onto this stack. Whenever you execute an operation, it takes as many ele- ments from the stack as needed. Pushing is done implicitly, so whenever you specify a number or a variable, it gets pushed onto the stack auto- matically. At the end of the calculation there should be one and only one value left on the stack. This is the outcome of the function and this is what is put into thevname. ForCDEFinstructions, the stack is pro- cessed for each data point on the graph.VDEFinstructions work on an entire data set in one run. Note, that currentlyVDEFinstructions only support a limited list of functions. Example: "VDEF:maximum=mydata,MAXIMUM" This will set variable "maximum" which you now can use in the rest of your RRD script. Example: "CDEF:mydatabits=mydata,8,*" This means: push variablemydata, push the number 8, execute the oper- ator*. The operator needs two elements and uses those to return one value. This value is then stored inmydatabits. As you may have guessed, this instruction means nothing more thanmydatabits=mydata*8. The real power ofRPNlies in the fact that it is always clear in which order to process the input. For expressions like "a = b + 3 * 5" you need to multiply 3 with 5 first before you addbto geta. However, with parentheses you could change this order: "a = (b + 3) * 5". InRPN, you would do "a = b, 3, +, 5, *" without the need for parentheses.OPERATORSBoolean operatorsLT,LE,GT,GE,EQ,NEPop two elements from the stack, compare them for the selected con- dition and return 1 for true or 0 for false. Comparing anunknownor aninfinitevalue will always result in 0 (false).UN,ISINFPop one element from the stack, compare this tounknownrespec- tively topositiveornegativeinfinity. Returns 1 for true or 0 for false.IFPops three elements from the stack. If the element popped last is 0 (false), the value popped first is pushed back onto the stack, otherwise the value popped second is pushed back. This does, in- deed, mean that any value other than 0 is considered to be true. Example: "A,B,C,IF" should be read as "if (A) then (B) else (C)" Comparing valuesMIN,MAXPops two elements from the stack and returns the smaller or larger, respectively. Note thatinfiniteis larger than anything else. If one of the input numbers isunknownthen the result of the opera- tion will beunknowntoo.LIMITPops two elements from the stack and uses them to define a range. Then it pops another element and if it falls inside the range, it is pushed back. If not, anunknownis pushed. The range defined includes the two boundaries (so: a number equal to one of the boundaries will be pushed back). If any of the three numbers involved is eitherunknownorinfinitethis function will always return anunknownExample: "CDEF:a=alpha,0,100,LIMIT" will returnunknownif alpha is lower than 0 or if it is higher than 100. Arithmetics+,-,*,/,%Add, subtract, multiply, divide, moduloSIN,COS,LOG,EXP,SQRTSine and cosine (input in radians), log and exp (natural loga- rithm), square root.ATANArctangent (output in radians).ATAN2Arctangent of y,x components (output in radians). This pops one element from the stack, the x (cosine) component, and then a sec- ond, which is the y (sine) component. It then pushes the arctan- gent of their ratio, resolving the ambiguity between quadrants. Example: "CDEF:angle=Y,X,ATAN2,RAD2DEG" will convert "X,Y" compo- nents into an angle in degrees.FLOOR,CEILRound down or up to the nearest integer.DEG2RAD,RAD2DEGConvert angle in degrees to radians, or radians to degrees.ABSTake the absolute value. Set OperationsSORT,REVPop one element from the stack. This is thecountof items to be sorted (or reversed). The topcountof the remaining elements are then sorted (or reversed) in place on the stack. Example: "CDEF:x=v1,v2,v3,v4,v5,v6,6,SORT,POP,5,REV,POP,+,+,+,4,/" will compute the average of the values v1 to v6 after removing the smallest and largest.AVGPop one element (count) from the stack. Now popcountelements and build the average, ignoring all UNKNOWN values in the process. Example: "CDEF:x=a,b,c,d,4,AVG"TRENDCreate a "sliding window" average of another data series. Usage: CDEF:smoothed=x,1800,TREND This will create a half-hour (1800 second) sliding window average of x. The average is essentially computed as shown here: +---!---!---!---!---!---!---!---!---> now delay t0 <---------------> delay t1 <---------------> delay t2 <---------------> Value at sample (t0) will be the average between (t0-delay) and (t0) Value at sample (t1) will be the average between (t1-delay) and (t1) Value at sample (t2) will be the average between (t2-delay) and (t2) Special valuesUNKNPushes an unknown value on the stackINF,NEGINFPushes a positive or negative infinite value on the stack. When such a value is graphed, it appears at the top or bottom of the graph, no matter what the actual value on the y-axis is.PREVPushes anunknownvalue if this is the first value of a data set or otherwise the result of thisCDEFat the previous time step. This allows you to do calculations across the data. This function can- not be used inVDEFinstructions.PREV(vname)Pushes anunknownvalue if this is the first value of a data set or otherwise the result of the vname variable at the previous time step. This allows you to do calculations across the data. This function cannot be used inVDEFinstructions.COUNTPushes the number 1 if this is the first value of the data set, the number 2 if it is the second, and so on. This special value allows you to make calculations based on the position of the value within the data set. This function cannot be used inVDEFinstructions. Time Time inside RRDtool is measured in seconds since the epoch. The epoch is defined to be "Thu Jan 1 00:00:00 UTC 1970".NOWPushes the current time on the stack.TIMEPushes the time the currently processed value was taken at onto the stack.LTIMETakes the time as defined byTIME, applies the time zone offset valid at that time including daylight saving time if your OS sup- ports it, and pushes the result on the stack. There is an elabo- rate example in the examples section below on how to use this. Processing the stack directlyDUP,POP,EXCDuplicate the top element, remove the top element, exchange the two top elements.VARIABLESThese operators work only onVDEFstatements. Note that currently ONLY these work forVDEF. MAXIMUM, MINIMUM, AVERAGE Return the corresponding value, MAXIMUM and MINIMUM also return the first occurrence of that value in the time component. Example: "VDEF:avg=mydata,AVERAGE" LAST, FIRST Return the last/first value including its time. The time for FIRST is actually the start of the corresponding interval, whereas LAST returns the end of the corresponding interval. Example: "VDEF:first=mydata,FIRST" TOTAL Returns the rate from each defined time slot multiplied with the step size. This can, for instance, return total bytes transfered when you have logged bytes per second. The time component returns the number of seconds. Example: "VDEF:total=mydata,TOTAL" PERCENT This should follow aDEForCDEFvname. Thevnameis popped, an- other number is popped which is a certain percentage (0..100). The data set is then sorted and the value returned is chosen such thatpercentagepercent of the values is lower or equal than the result.Unknownvalues are considered lower than any finite number for this purpose so if this operator returns anunknownyou have quite a lot of them in your data.Infinite numbers are lesser, or more, than the finite numbers and are always more than theUnknownnumbers. (NaN < -INF < finite values < INF) Example: "VDEF:perc95=mydata,95,PERCENT" LSLSLOPE, LSLINT, LSLCORREL Return the parameters for aLeastSquaresLine(y=mx+b)which approximate the provided dataset. LSLSLOPE is the slope(m)of the line related to the COUNT position of the data. LSLINT is the y-intercept(b), which happens also to be the first data point on the graph. LSLCORREL is the Correlation Coefficient (also know as Pearson's Product Moment Correlation Coefficient). It will range from 0 to +/-1 and represents the quality of fit for the approxima- tion. Example: "VDEF:slope=mydata,LSLSLOPE"SEE ALSOrrdgraph gives an overview of howrrdtoolgraphworks. rrdgraph_data describesDEF,CDEFandVDEFin detail. rrdgraph_rpn describes theRPNlanguage used in the?DEFstatements. rrdgraph_graph page describes all of the graph and print functions. Make sure to read rrdgraph_examples for tips&tricks.AUTHORProgram by Tobias Oetiker <tobi@oetiker.ch> This manual page by Alex van den Bogaerdt <alex@ergens.op.het.net> 1.2.30 2009-01-19 RRDGRAPH_RPN(1)

NAME | SYNOPSIS | DESCRIPTION | OPERATORS | VARIABLES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:

<https://www.freebsd.org/cgi/man.cgi?query=rrdgraph_rpn&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>