Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
RIPD(8)				 Version 0.88			       RIPD(8)

NAME
       ripd - a	RIP routing engine for use with	Zebra

SYNOPSIS
       ripd [ -dhrv ] [	-f config-file ] [ -i pid-file ] [ -P port-number ]

DESCRIPTION
       ripd is a routing component that	supports the zebra route engine.  ripd
       supports	RIPv1, RIPv2, and so forth.

OPTIONS
       -d, --daemon
	      Runs in daemon mode, forking and exiting from tty.

       -f, --config-file config-file
	      Specifies	the config file	to use for startup. If	not  specified
	      this option will likely default to /usr/local/etc/ripd.conf.

       -h, --help
	      A	brief message.

       -i, --pid_file pid-file
	      When  ripd  starts its process idenifier is written to pid-file.
	      The init system uses the recorded	PID to stop or	restart	 ripd.
	      The likely default is /var/run/ripd.pid.

       -P, --vty_port port-number
	      Specify the port that the	ripd VTY will listen on. This defaults
	      to 2602, as specified in /etc/services.

       -r, --retain
	      When the program terminates, retain routes added by ripd.

       -v, --version
	      Print the	version	and exit.

COMMANDS
	router rip
	no router rip

	rip version [1|2]
	no rip version [1|2]

	network	[A.B.C.D/M]
	no network [A.B.C.D/M]

	network	[IFNAME]
	no network [IFNAME]

	neighbor [A.B.C.D]
	no neighbor [A.B.C.D]

	redistribute kernel
	redistribute kernel metric [METRIC]
	redistribute kernel route-map [ROUTE-MAP]
	no redistribute	kernel

	redistribute static
	redistribute static metric [METRIC]
	redistribute static route-map [ROUTE-MAP]
	no redistribute	static

	redistribute connected
	redistribute connected metric [METRIC]
	redistribute connected route-map [ROUTE-MAP]
	no redistribute	connected

	redistribute ospf
	redistribute ospf metric [METRIC]
	redistribute ospf route-map [ROUTE-MAP]
	no redistribute	ospf

	redistribute bgp
	redistribute bgp metric	[METRIC]
	redistribute bgp route-map [ROUTE-MAP]
	no redistribute	bgp

	route [A.B.C.D/M]
	no route [A.B.C.D/M]

	default-information originate
	no default-information originate

	default-metric [METRIC]
	no default-metric [METRIC]

	passive-interface [IFNAME]
	no passive-interface [IFNAME]

	offset-list [ACCESS-LIST] [in|out]
	offset-list [ACCESS-LIST] [in|out] [IFNAME]
	no offset-list [ACCESS-LIST] [in|out]

	timers basic [UPDATE-INTERVAL] [INVALID] [TIMEOUT] [GARBAGE-COLLECT]
	no timers basic

	distribute-list	[ACCESS-LIST] [in|out] [IFNAME]
	no distribute-list [ACCESS-LIST] [in|out] [IFNAME]

	distribute-list	prefix [PREFIX-LIST] [in|out] [IFNAME]
	no distribute-list prefix [PREFIX-LIST]	[in|out] [IFNAME]

	distance [DISTANCE]
	no distance [DISTANCE]

	distance [DISTANCE] [A.B.C.D/M]
	no distance [DISTANCE] [A.B.C.D/M]

	distance [DISTANCE] [A.B.C.D/M]	[ACCESS-LIST]
	no distance [DISTANCE] [A.B.C.D/M] [ACCESS-LIST]

	ip rip send version [VERSION]
	no ip rip send version [VERSION]
	ip rip receive version [VERSION]
	no ip rip receive version [VERSION]

	ip rip authentication mode [md5|text]
	no ip rip authentication mode [md5|text]

	ip rip authentication key-chain	[KEY-CHAIN]
	no ip rip authentication key-chain [KEY-CHAIN]

	ip rip authentication string [STRING]
	no ip rip authentication string	[STRING]

	ip spli-horizon
	no ip spli-horizon

	show ip	rip
	show ip	protocols
	show debugging rip

	debug rip
	debug rip events
	debug rip packet
	debug rip zebra

FILES
       /usr/local/sbin/ripd
	      The default location of the ripd binary.

       /usr/local/etc/ripd.conf
	      The default location of the ripd config file.

       $(PWD)/ripd.log
	      If the ripd process is config'd to output	logs to	a  file,  then
	      you will find this file in the directory where you started ripd.

WARNING
       This  man  page	is  intended as	a quick	reference for command line op-
       tions, and for config file commands. The	 definitive  document  is  the
       Info file zebra.

DIAGNOSTICS
       The  ripd  process may log to standard output, to a VTY,	to a log file,
       or through syslog to the	system logs.  ripd supports many debugging op-
       tions, see the Info file, or the	source for details.

SEE ALSO
       References to other related man pages:

       ripngd(8), ospfd(8), ospf6d(8), bgpd(8),	zebra(8)

BUGS
       ripd  eats bugs for breakfast. If you have food for the maintainers try
       <bug-zebra@gnu.org>

AUTHOR[S]
       See <www.zebra.org>, or the Info	file for an accurate list of authors.

Zebra				   July	2000			       RIPD(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | FILES | WARNING | DIAGNOSTICS | SEE ALSO | BUGS | AUTHOR[S]

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ripd&sektion=8&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help