Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
RHINO(8)			  NUT Manual			      RHINO(8)

NAME
       rhino - Driver for Brazilian Microsol RHINO UPS equipment

NOTE
       This man	page only documents the	hardware-specific features of the
       rhino driver. For information about the core driver, see	nutupsdrv(8).

SUPPORTED HARDWARE
       This driver has been tested with	:

       o   Rhino 6000 VA

       o   Rhino 7500 VA

       o   Rhino 10000 VA

       o   Rhino 20000 VA

       All Rhino models	are sinusoidal on-line.

EXTRA ARGUMENTS
       This driver support the following extra optional	settings in
       ups.conf(5):

       battext = n - (default =	0, no extra battery, where n = Ampere*hour )

COMMANDS
       o   load.on - Turn on the load immediately

       o   load.off - Turn off the load	immediately

       o   bypass.start	- Put the UPS in bypass	mode

       o   bypass.stop - Put the UPS out of bypass mode

       o   shutdown.stayoff - Shut down	in 3 minutes and do not	return

AUTHOR
       Silvino B. MagalhALes <sbm2yk@gmail.com>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network	UPS Tools) home	page: http://www.networkupstools.org/

Network	UPS Tools 2.7.4.	  03/01/2021			      RHINO(8)

NAME | NOTE | SUPPORTED HARDWARE | EXTRA ARGUMENTS | COMMANDS | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=rhino&sektion=8&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help