Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
REMOTETRX(1)			 User Manuals			  REMOTETRX(1)

NAME
       remotetrx - The SvxLink remote transceiver application

SYNOPSIS
       remotetrx [--help] [--daemon] [--logfile=log file] [--config=configura-
       tion file] [--pidfile=pid file] [--runasuser=user name]

DESCRIPTION
       remotetrx is the	SvxLink	remote transceiver application.	It is used  to
       connect	to  a  receiver	 and/or	 transmitter and then the main SvxLink
       server can connect to the remote	transceiver server via TCP/IP  to  get
       audio to/from it.

       It  is  also  possible to link via RF instead of	via TCP/IP. An example
       use of the latter would be if the repeater is placed in a remote	 loca-
       tion  where there is no network.	Then networked remote receivers	can be
       linked up to the	repeater via RF	from a	link  site  where  network  is
       available.

       The setup is pretty straight forward. The setup of a receiver or	trans-
       mitter is done in the same way as in the	 SvxLink  server  so  use  the
       svxlink.conf(5) manual page as a	reference for that. The	remotetrx spe-
       cific configuration is described	in the remotetrx.conf(5) manual	page.

       On the SvxLink server side  you	need  to  configure  a	networked  re-
       ceiver/transmitter.  That  is  described	 in the	svxlink.conf(5)	manual
       page in the Networked Receiver/Transmitter Section. If  using  multiple
       receivers  you  also want to configure a	voter and make proper calibra-
       tion of the signal level	detector on each receiver.

OPTIONS
       --help Print a help message and exit.

       --daemon
	      Start the	SvxLink	remote receiver	server as a daemon.

       --runasuser
	      Start RemoteTrx as the specified user. The  switch  to  the  new
	      user will	happen after the log and pid files has been opened.

       --logfile=log file
	      Specify  a  log  file  to	 put  all output into. Both stdout and
	      stderr will be redirected	to the log file.

       --pidfile=pid file
	      Specify a	pid file to write the process ID into.

       --config=configuration file
	      Specify which configuration file to use.

FILES
       /etc/svxlink/remotetrx.conf (or deprecated /etc/remotetrx.conf)
	      The system wide configuration file.  See	remotetrx.conf(5)  for
	      further details.

       ~/.svxlink/remotetrx.conf
	      Per  user	 configuration file. See remotetrx.conf(5) for further
	      details.

       /etc/svxlink/remotetrx.d/*
	      Additional configuration files. This directory is	setup  by  the
	      CFG_DIR configuration variable.

ENVIRONMENT
       ASYNC_AUDIO_NOTRIGGER
	      Set  this	 environment  variable	to 1 if	you get	an error about
	      ioctl: Broken pipe during	remotetrx server  startup  when	 using
	      OSS audio.

       ASYNC_AUDIO_ALSA_ZEROFILL
	      Set  this	 environment variable to 1 to make the Alsa audio code
	      write zeros to the audio device when there is no audio to	 write
	      available. This may be needed for	some audio devices that	take a
	      long time	to recover from	an underflow condition.

       HOME   Used to find the per user	configuration file.

AUTHOR
       Tobias Blomberg (SM0SVX)	<sm0svx	at users dot sourceforge dot net>

REPORTING BUGS
       SvxLink Devel <svxlink-devel at lists dot sourceforge dot net>

SEE ALSO
       svxlink(1), remotetrx.conf(5), svxlink.conf(5), siglevdetcal(1)

Linux				   JULY	2019			  REMOTETRX(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | ENVIRONMENT | AUTHOR | REPORTING BUGS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=remotetrx&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help