Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
REGEX(3)               FreeBSD Library Functions Manual               REGEX(3)

     regcomp, regexec, regerror, regfree -- regular-expression library

     Standard C Library (libc, -lc)

     #include <sys/types.h>
     #include <regex.h>

     regcomp(regex_t *preg, const char *pattern, int cflags);

     regexec(const regex_t *preg, const char *string, size_t nmatch,
         regmatch_t pmatch[], int eflags);

     regerror(int errcode, const regex_t *preg, char *errbuf,
         size_t errbuf_size);

     regfree(regex_t *preg);

     These routines implement IEEE Std 1003.2 (``POSIX.2'') regular expres-
     sions (``RE''s); see re_format(7).  Regcomp() compiles an RE written as a
     string into an internal form, regexec() matches that internal form
     against a string and reports results, regerror() transforms error codes
     from either into human-readable messages, and regfree() frees any dynami-
     cally-allocated storage used by the internal form of an RE.

     The header <regex.h> declares two structure types, regex_t and
     regmatch_t, the former for compiled internal forms and the latter for
     match reporting.  It also declares the four functions, a type regoff_t,
     and a number of constants with names starting with ``REG_''.

     Regcomp() compiles the regular expression contained in the pattern
     string, subject to the flags in cflags, and places the results in the
     regex_t structure pointed to by preg.  Cflags is the bitwise OR of zero
     or more of the following flags:

     REG_EXTENDED  Compile modern (``extended'') REs, rather than the obsolete
                   (``basic'') REs that are the default.

     REG_BASIC     This is a synonym for 0, provided as a counterpart to
                   REG_EXTENDED to improve readability.

     REG_NOSPEC    Compile with recognition of all special characters turned
                   off.  All characters are thus considered ordinary, so the
                   ``RE'' is a literal string.  This is an extension, compati-
                   ble with but not specified by IEEE Std 1003.2
                   (``POSIX.2''), and should be used with caution in software
                   intended to be portable to other systems.  REG_EXTENDED and
                   REG_NOSPEC may not be used in the same call to regcomp().

     REG_ICASE     Compile for matching that ignores upper/lower case distinc-
                   tions.  See re_format(7).

     REG_NOSUB     Compile for matching that need only report success or fail-
                   ure, not what was matched.

     REG_NEWLINE   Compile for newline-sensitive matching.  By default, new-
                   line is a completely ordinary character with no special
                   meaning in either REs or strings.  With this flag, `[^'
                   bracket expressions and `.' never match newline, a `^'
                   anchor matches the null string after any newline in the
                   string in addition to its normal function, and the `$'
                   anchor matches the null string before any newline in the
                   string in addition to its normal function.

     REG_PEND      The regular expression ends, not at the first NUL, but just
                   before the character pointed to by the re_endp member of
                   the structure pointed to by preg.  The re_endp member is of
                   type const char *.  This flag permits inclusion of NULs in
                   the RE; they are considered ordinary characters.  This is
                   an extension, compatible with but not specified by IEEE Std
                   1003.2 (``POSIX.2''), and should be used with caution in
                   software intended to be portable to other systems.

     When successful, regcomp() returns 0 and fills in the structure pointed
     to by preg.  One member of that structure (other than re_endp) is publi-
     cized: re_nsub, of type size_t, contains the number of parenthesized
     subexpressions within the RE (except that the value of this member is
     undefined if the REG_NOSUB flag was used).  If regcomp() fails, it
     returns a non-zero error code; see DIAGNOSTICS.

     Regexec() matches the compiled RE pointed to by preg against the string,
     subject to the flags in eflags, and reports results using nmatch, pmatch,
     and the returned value.  The RE must have been compiled by a previous
     invocation of regcomp().  The compiled form is not altered during execu-
     tion of regexec(), so a single compiled RE can be used simultaneously by
     multiple threads.

     By default, the NUL-terminated string pointed to by string is considered
     to be the text of an entire line, minus any terminating newline.  The
     eflags argument is the bitwise OR of zero or more of the following flags:

     REG_NOTBOL    The first character of the string is not the beginning of a
                   line, so the `^' anchor should not match before it.  This
                   does not affect the behavior of newlines under REG_NEWLINE.

     REG_NOTEOL    The NUL terminating the string does not end a line, so the
                   `$' anchor should not match before it.  This does not
                   affect the behavior of newlines under REG_NEWLINE.

     REG_STARTEND  The string is considered to start at string +
                   pmatch[0].rm_so and to have a terminating NUL located at
                   string + pmatch[0].rm_eo (there need not actually be a NUL
                   at that location), regardless of the value of nmatch.  See
                   below for the definition of pmatch and nmatch.  This is an
                   extension, compatible with but not specified by IEEE Std
                   1003.2 (``POSIX.2''), and should be used with caution in
                   software intended to be portable to other systems.  Note
                   that a non-zero rm_so does not imply REG_NOTBOL;
                   REG_STARTEND affects only the location of the string, not
                   how it is matched.

     See re_format(7) for a discussion of what is matched in situations where
     an RE or a portion thereof could match any of several substrings of

     Normally, regexec() returns 0 for success and the non-zero code
     REG_NOMATCH for failure.  Other non-zero error codes may be returned in
     exceptional situations; see DIAGNOSTICS.

     If REG_NOSUB was specified in the compilation of the RE, or if nmatch is
     0, regexec() ignores the pmatch argument (but see below for the case
     where REG_STARTEND is specified).  Otherwise, pmatch points to an array
     of nmatch structures of type regmatch_t.  Such a structure has at least
     the members rm_so and rm_eo, both of type regoff_t (a signed arithmetic
     type at least as large as an off_t and a ssize_t), containing respec-
     tively the offset of the first character of a substring and the offset of
     the first character after the end of the substring.  Offsets are measured
     from the beginning of the string argument given to regexec().  An empty
     substring is denoted by equal offsets, both indicating the character fol-
     lowing the empty substring.

     The 0th member of the pmatch array is filled in to indicate what sub-
     string of string was matched by the entire RE.  Remaining members report
     what substring was matched by parenthesized subexpressions within the RE;
     member i reports subexpression i, with subexpressions counted (starting
     at 1) by the order of their opening parentheses in the RE, left to right.
     Unused entries in the array (corresponding either to subexpressions that
     did not participate in the match at all, or to subexpressions that do not
     exist in the RE (that is, i > preg->re_nsub)) have both rm_so and rm_eo
     set to -1.  If a subexpression participated in the match several times,
     the reported substring is the last one it matched.  (Note, as an example
     in particular, that when the RE `(b*)+' matches `bbb', the parenthesized
     subexpression matches each of the three `b's and then an infinite number
     of empty strings following the last `b', so the reported substring is one
     of the empties.)

     If REG_STARTEND is specified, pmatch must point to at least one
     regmatch_t (even if nmatch is 0 or REG_NOSUB was specified), to hold the
     input offsets for REG_STARTEND.  Use for output is still entirely con-
     trolled by nmatch; if nmatch is 0 or REG_NOSUB was specified, the value
     of pmatch[0] will not be changed by a successful regexec().

     Regerror() maps a non-zero errcode from either regcomp() or regexec() to
     a human-readable, printable message.  If preg is non-NULL, the error code
     should have arisen from use of the regex_t pointed to by preg, and if the
     error code came from regcomp(), it should have been the result from the
     most recent regcomp() using that regex_t.  (Regerror() may be able to
     supply a more detailed message using information from the regex_t.)
     Regerror() places the NUL-terminated message into the buffer pointed to
     by errbuf, limiting the length (including the NUL) to at most errbuf_size
     bytes.  If the whole message won't fit, as much of it as will fit before
     the terminating NUL is supplied.  In any case, the returned value is the
     size of buffer needed to hold the whole message (including terminating
     NUL).  If errbuf_size is 0, errbuf is ignored but the return value is
     still correct.

     If the errcode given to regerror() is first ORed with REG_ITOA, the
     ``message'' that results is the printable name of the error code, e.g.
     ``REG_NOMATCH'', rather than an explanation thereof.  If errcode is
     REG_ATOI, then preg shall be non-NULL and the re_endp member of the
     structure it points to must point to the printable name of an error code;
     in this case, the result in errbuf is the decimal digits of the numeric
     value of the error code (0 if the name is not recognized).  REG_ITOA and
     REG_ATOI are intended primarily as debugging facilities; they are exten-
     sions, compatible with but not specified by IEEE Std 1003.2
     (``POSIX.2''), and should be used with caution in software intended to be
     portable to other systems.  Be warned also that they are considered
     experimental and changes are possible.

     Regfree() frees any dynamically-allocated storage associated with the
     compiled RE pointed to by preg.  The remaining regex_t is no longer a
     valid compiled RE and the effect of supplying it to regexec() or
     regerror() is undefined.

     None of these functions references global variables except for tables of
     constants; all are safe for use from multiple threads if the arguments
     are safe.

     There are a number of decisions that IEEE Std 1003.2 (``POSIX.2'') leaves
     up to the implementor, either by explicitly saying ``undefined'' or by
     virtue of them being forbidden by the RE grammar.  This implementation
     treats them as follows.

     See re_format(7) for a discussion of the definition of case-independent

     There is no particular limit on the length of REs, except insofar as mem-
     ory is limited.  Memory usage is approximately linear in RE size, and
     largely insensitive to RE complexity, except for bounded repetitions.
     See BUGS for one short RE using them that will run almost any system out
     of memory.

     A backslashed character other than one specifically given a magic meaning
     by IEEE Std 1003.2 (``POSIX.2'') (such magic meanings occur only in obso-
     lete [``basic''] REs) is taken as an ordinary character.

     Any unmatched `[' is a REG_EBRACK error.

     Equivalence classes cannot begin or end bracket-expression ranges.  The
     endpoint of one range cannot begin another.

     RE_DUP_MAX, the limit on repetition counts in bounded repetitions, is

     A repetition operator (`?', `*', `+', or bounds) cannot follow another
     repetition operator.  A repetition operator cannot begin an expression or
     subexpression or follow `^' or `|'.

     `|' cannot appear first or last in a (sub)expression or after another
     `|', i.e. an operand of `|' cannot be an empty subexpression.  An empty
     parenthesized subexpression, `()', is legal and matches an empty
     (sub)string.  An empty string is not a legal RE.

     A `{' followed by a digit is considered the beginning of bounds for a
     bounded repetition, which must then follow the syntax for bounds.  A `{'
     not followed by a digit is considered an ordinary character.

     `^' and `$' beginning and ending subexpressions in obsolete (``basic'')
     REs are anchors, not ordinary characters.

     grep(1), re_format(7)

     IEEE Std 1003.2 (``POSIX.2''), sections 2.8 (Regular Expression Notation)
     and B.5 (C Binding for Regular Expression Matching).

     Non-zero error codes from regcomp() and regexec() include the following:

     REG_NOMATCH   regexec() failed to match
     REG_BADPAT    invalid regular expression
     REG_ECOLLATE  invalid collating element
     REG_ECTYPE    invalid character class
     REG_EESCAPE   `\' applied to unescapable character
     REG_ESUBREG   invalid backreference number
     REG_EBRACK    brackets `[ ]' not balanced
     REG_EPAREN    parentheses `( )' not balanced
     REG_EBRACE    braces `{ }' not balanced
     REG_BADBR     invalid repetition count(s) in `{ }'
     REG_ERANGE    invalid character range in `[ ]'
     REG_ESPACE    ran out of memory
     REG_BADRPT    `?', `*', or `+' operand invalid
     REG_EMPTY     empty (sub)expression
     REG_ASSERT    can't happen - you found a bug
     REG_INVARG    invalid argument, e.g. negative-length string

     Originally written by Henry Spencer.  Altered for inclusion in the 4.4BSD

     This is an alpha release with known defects.  Please report problems.

     The back-reference code is subtle and doubts linger about its correctness
     in complex cases.

     Regexec() performance is poor.  This will improve with later releases.
     Nmatch exceeding 0 is expensive; nmatch exceeding 1 is worse.  Regexec()
     is largely insensitive to RE complexity except that back references are
     massively expensive.  RE length does matter; in particular, there is a
     strong speed bonus for keeping RE length under about 30 characters, with
     most special characters counting roughly double.

     Regcomp() implements bounded repetitions by macro expansion, which is
     costly in time and space if counts are large or bounded repetitions are
     nested.  An RE like, say, `((((a{1,100}){1,100}){1,100}){1,100}){1,100}'
     will (eventually) run almost any existing machine out of swap space.

     There are suspected problems with response to obscure error conditions.
     Notably, certain kinds of internal overflow, produced only by truly enor-
     mous REs or by multiply nested bounded repetitions, are probably not han-
     dled well.

     Due to a mistake in IEEE Std 1003.2 (``POSIX.2''), things like `a)b' are
     legal REs because `)' is a special character only in the presence of a
     previous unmatched `('.  This can't be fixed until the spec is fixed.

     The standard's definition of back references is vague.  For example, does
     `a\(\(b\)*\2\)*d' match `abbbd'?  Until the standard is clarified, behav-
     ior in such cases should not be relied on.

     The implementation of word-boundary matching is a bit of a kludge, and
     bugs may lurk in combinations of word-boundary matching and anchoring.

FreeBSD 4.10                    March 20, 1994                    FreeBSD 4.10


Want to link to this manual page? Use this URL:

home | help