Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
qjail-intro(8)		  BSD System Manager's Manual		qjail-intro(8)

NAME
     qjail-intro -- Introduction to chroot directory tree, jails, and qjail.

DESCRIPTION
     Qjail [ q = quick ] is a 4th generation wrapper for the basic chroot jail
     system that includes security and performance enhancements. Plus a	new
     level of "user friendliness" enhancements dealing with deploying large
     jail environments,	100's of jails.	Qjail requires no knowledge of the
     jail command usage.

OVERVIEW
     The original FreeBSD developers felt the need for a method	to restrict a
     processes access to the host system resources so if it becomes
     compromised the host system is protected from also	being compromised.
     They achieved this	goal with the "chroot" command which was in the
     original 4.4BSD system, from which	the current FreeBSD RELEASE is a
     direct descendant.	This first generation "chroot" environment, made it
     look like the named directory was the "root" IE starting point; of	a
     system directory tree. Just like "/" is to	FreeBSD. In this basic
     incarnation, the directory	tree would just	have the binaries necessary to
     form a environment	for a single application such as apache	web server.
     You could have multiple such "chroot" environments. They all shared the
     hosts network and disk space. This	trait continues	into today's jail
     systems. As you can imagine, occupants of these basic "chroot's"
     influenced	users to stay at the RELEASE they were at because of the size
     of	the task to redevelop them under a new RELEASE mixture of binaries.
     Jail deployments greater than two were uncommon.

     The jail utility appeared in FreeBSD 4.0. With this second	generation
     "chroot" enhancement came the renaming of a "chroot" environment to a
     "jail', the ability to assign IP address to a jail, auto starting jails
     at	boot time, and a general shift in thought about	the occupant of	the
     jail. The customized streamline apache web	server jail that had no	way
     too be easily configured, progressed into a complete clone	of the
     operating system with all the customizing options one is familiar with on
     the host. The major shortcoming of	this type jail system is each jail has
     its own copy of the running system	binaries. FreeBSD reserves a limited
     number of control structures for storing files and	directories, called
     inodes. Creating a	few jails consumes many	of those valuable inodes,
     eventually	preventing the creation	of new jails. Worse yet	is each	jail
     loads its own copy	of the running binaries	into memory, which causes
     thrashing on the swap device as memory pages are swapped in and out as
     the limited memory	is shared between the host and the jails. Besides
     consuming resources and creating performance degradation, this also
     causes a major administration headache when wanting to update the host
     running system, because the host and the jails have to be running the
     same version of the binaries. Jail	deployments greater that four were
     uncommon.

     Then about	RELEASE	5.4 the	creative use of	the nullfs command added the
     ability for jails to share	a single set of	the running binaries between
     all the jails. This third generation solution solved the performance
     problems of the second generation,	but had	its own	problems. Setting up a
     nullfs running binaries environment to support multiple jails was a
     undocumented manual one. Plus a second type of jail became	available
     called an "image".	The image jail introduced the ability to predefine the
     amount of disk space a jail could consume.	This was accomplished with the
     mdconfig command, which mounts a flat file	as a directory tree. Jail
     deployments greater than 10 were uncommon.	The administration of this
     jail system type became increasing	difficult with each newly added	jail.

     During FreeBSD RELEASE 8.0, "qjail" was introduced	which is a wrapper
     that camouflages the underlying "jail" commands and automates those
     manual setup steps	into a single command. Mounting	a directory tree
     containing	the running binaries as	read-only files	using "nullfs" became
     the method	forming	the basic design of the	"qjail"	jail system. The
     functions necessary to manage jails were condensed	into the following
     commands, "install" for installing	an pristine copy of the	RELEASE
     version of	FreeBSD, the "create" command to create	both directory tree
     type jails	and sparse image type jails. This includes the ability to
     assign IP address with their network device name, so aliases are auto
     created on	jail start and auto removed on jail stop. An archived seed
     jail pre-configured with ports can	be used	as the template	to form	new
     jails. To make the	deployment of many jails with the same configuration,
     jails can be auto duplicated while	at the same time incrementing the last
     octal of the IP address. The archive, restore and delete commands are
     commonly understood functions. The	"update" command for using the
     portsnap command to populate a complete ports tree, and the ability to
     copy the host's running binaries after a host RELEASE upgrade. A "list"
     command to	display	the qjail jail status. The "config" command can	flag a
     jail as "norun" to	exclude	it from	being auto started at boot time. The
     "norun" status can	be toggled back	and forth on a single jail or all
     jails at once. Jails can be renamed and their IP address changed.

     Qjail deploys two different jail types. The first type is based on	a
     Directory tree. This type has unlimited disk space	growth potential,it
     shares the	host's disk space. The jail will never run out of space	until
     the host does. The	second type is based on	a sparse image file. A sparse
     file is one that occupies only the	sum size of its	contents, not its
     allocation	size. IE; a sparse file	allocated size of 5M, but only having
     7 files, each 1k in size, only occupies 7k	of physical disk space.	As
     content is	added, additional physical disk	space is occupied up to	the 5M
     allocation	ceiling. The sparse file is mounted as a memory	disk using the
     mdconfig command and populated with the directory tree content of a jail.
     This configuration	is called a sparse image jail. It's major benefits is
     it	provides a way to put a	hard limit on the maximum amount of disk space
     a jail can	consume. This provides an addition level of protection to the
     host from intentional or unintentional run-a-way processes	inside of a
     jail consuming disk space until the host system dies.

     But by far	"qjail"	greatest achievement to	the advancement	of jailed
     systems, is the addition of "user-friendliness" that simplifies the
     management	of large deployments of	hundreds of jails. This	enhancement
     adds the ability to designate a portion of	the jail name as a group
     prefix so the command being executed will apply to	only those jail	names
     matching that prefix. A simple jail naming	convention allows the grouping
     of	like function jails together. The other	advancement is the ability to
     create different "zones" consisting of identical jail systems each	with
     their own groups of jails.

     Qjail reduces the complexities of large jail deployments to the novice
     level. Qjail has a	fully documented manpage, which	is a rarity in the
     FreeBSD world. Details are	given to facilitate the	use of qjail's
     capabilities to the fullest extent	possible.

QJAIL SYSTEM
     The qjail system is comprised of two components, qjail and	qjail-bootime.

     qjail is the main workhorse utility. It's located at
     /usr/local/bin/qjail.It can install the qjail environment,	create new
     jails, archive, restore, delete and update	jails, open a jail console,
     and list the status of all	the jails. See qjail(8)	for complete usage
     details.

     qjail2-bootime script is located at /usr/local/etc/rc.d/.	It's main
     purpose is	to start all jails at boot time	and stop all jails when	the
     shutdown command is executed on the host. Adding qjail_enable="YES" to
     /etc/rc.conf will activate	it.

SEE ALSO
     qjail(8), qjail-howto(8), qjail-vnet-howto(8), qjail-ipv6-testing(8)
     jail(8), mount_nullfs(8), mdconfig(8)

AUTHOR
     Joe Barbish <qjail1@a1poweruser.com>

BSD			       February	15, 2017			   BSD

NAME | DESCRIPTION | OVERVIEW | QJAIL SYSTEM | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=qjail-intro&sektion=8&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help