Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PST(4)			 BSD Kernel Interfaces Manual			PST(4)

NAME
     pst -- Device driver for Promise Supertrak	SX6000

SYNOPSIS
     Include this line in the kernel config file:
     device pst

DESCRIPTION
     This driver is for	the Promise Supertrak SX6000 ATA hardware RAID con-
     troller.  It supports (in hardware) RAID levels 0,	1, 0+1,	3, 5 and JBOD
     on	up to 6	ATA disk drives, including automatic rebuild and hotswap, and
     supports signalling disk status on	LED's on Promise Superswap disk	enclo-
     sures.  The Supertrak lines of controllers	does not support non-disk de-
     vices.

NOTES
     The pst driver does not support manipulating the RAID from	the OS,	RAID's
     need to be	setup from the onboard BIOS. However hot swap, hot spare, and
     automatic rebuilds	are supported without reboot.

HISTORY
     The pst driver first appeared in FreeBSD 4.7.

AUTHORS
     The pst driver and	man page was written by	Soren Schmidt
     <sos@FreeBSD.org>.

BSD			       November	21, 2001			   BSD

NAME | SYNOPSIS | DESCRIPTION | NOTES | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=pst&sektion=4&manpath=FreeBSD+4.11-RELEASE>

home | help