Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PROCMAILEX(5)		      File Formats Manual		 PROCMAILEX(5)

NAME
       procmailex - procmail rcfile examples

SYNOPSIS
       $HOME/.procmailrc examples

DESCRIPTION
       For a description of the	rcfile format see procmailrc(5).

       The  weighted  scoring  technique  is  described	in detail in the proc-
       mailsc(5) man page.

       This man	page shows several example recipes.  For examples of  complete
       rcfiles	you can	check the NOTES	section	in procmail(1),	or look	at the
       example	rcfiles	 part  of  the	procmail  source  distribution	(proc-
       mail*/examples/?procmailrc).

EXAMPLES
       Sort  out  all  mail  coming  from the scuba-dive mailing list into the
       mailfolder scubafile (uses the locallockfile scubafile.lock).

	      :0:
	      *	^TOscuba
	      scubafile

       Forward all mail	from peter about compilers to william (and keep	a copy
       of it here in petcompil).

	      :0
	      *	^From.*peter
	      *	^Subject:.*compilers
	      {
		 :0 c
		 ! william@somewhere.edu

		 :0
		 petcompil
	      }

       An equivalent solution that accomplishes	the same:

	      :0 c
	      *	^From.*peter
	      *	^Subject:.*compilers
	      !	william@somewhere.edu

		 :0 A
		 petcompil

       An equivalent, but slightly slower solution that	accomplishes the same:

	      :0 c
	      *	^From.*peter
	      *	^Subject:.*compilers
	      !	william@somewhere.edu

	      :0
	      *	^From.*peter
	      *	^Subject:.*compilers
	      petcompil

       If  you	are fairly new to procmail and plan to experiment a little bit
       it often	helps to have a	safety net of some sort.  Inserting  the  fol-
       lowing  two  recipes above all other recipes will make sure that	of all
       arriving	mail always the	last 32	messages will be preserved.  In	 order
       for  it	to  work  as  intended,	 you  have to create a directory named
       `backup'	in $MAILDIR prior to inserting these two recipes.

	      :0 c
	      backup

	      :0 ic
	      |	cd backup && rm	-f dummy `ls -t	msg.* |	sed -e 1,32d`

       If your system doesn't generate or generates incorrect leading `From  '
       lines  on  every	mail, you can fix this by calling up procmail with the
       -f- option.  To fix the same problem by different means,	you could have
       inserted	 the  following	 two  recipes  above all other recipes in your
       rcfile.	They will filter the header of any mail	through	formail	 which
       will strip any leading `From ', and automatically regenerates it	subse-
       quently.

	      :0 fhw
	      |	formail	-I "From " -a "From "

       Add the headers of all messages that didn't come	from the postmaster to
       your  private header collection (for statistics or mail debugging); and
       use the lockfile	`headc.lock'.  In order	to make	sure the  lockfile  is
       not  removed  until  the	 pipe has finished, you	have to	specify	option
       `w'; otherwise the lockfile would be removed as soon as	the  pipe  has
       accepted	the mail.

	      :0 hwc:
	      *	!^FROM_MAILER
	      |	uncompress headc.Z; cat	>>headc; compress headc

       Or, if you would	use the	more efficient gzip instead of compress:

	      :0 hwc:
	      *	!^FROM_MAILER
	      |	gzip >>headc.gz

       Forward	all mails shorter than 1000 bytes to my	home address (no lock-
       file needed on this recipe).

	      :0
	      *	< 1000
	      !	myname@home

       Split up	incoming digests from the  surfing  mailing  list  into	 their
       individual messages, and	store them into	surfing, using surfing.lock as
       the locallockfile.

	      :0:
	      *	^Subject:.*surfing.*Digest
	      |	formail	+1 -ds >>surfing

       Store everything	coming from  the  postmaster  or  mailer-daemon	 (like
       bounced	mail)  into the	file postm, using postm.lock as	the locallock-
       file.

	      :0:
	      *	^FROM_MAILER
	      postm

       A simple	autoreply recipe.  It makes sure that neither  mail  from  any
       daemon (like bouncing mail or mail from mailing-lists), nor autoreplies
       coming from yourself will be autoreplied	to.  If	this precaution	 would
       not  be	taken,	disaster  could	result (`ringing' mail).  In order for
       this recipe to autoreply	to all the incoming mail, you should of	course
       insert  it  before  all	other  recipes in your rcfile.	However, it is
       advisable to put	it after any recipes that process the mails from  sub-
       scribed	mailinglists;  it  generally  is  not  a good idea to generate
       autoreplies to  mailinglists  (yes,  the	 !^FROM_DAEMON	regexp	should
       already	catch  those,  but  if the mailinglist doesn't follow accepted
       conventions, this might not be enough).

	      :0 h c
	      *	!^FROM_DAEMON
	      *	!^X-Loop: your@own.mail.address
	      |	(formail -r -I"Precedence: junk" \
		  -A"X-Loop: your@own.mail.address" ; \
		 echo "Mail received.")	| $SENDMAIL -t

       A more complicated autoreply  recipe  that  implements  the  functional
       equivalent of the well known vacation(1)	program.  This recipe is based
       on the same principles as the last one (prevent	`ringing'  mail).   In
       addition	 to that however, it maintains a vacation database by extract-
       ing the name of the sender and inserting	it in the vacation.cache  file
       if  the	name was new (the vacation.cache file is maintained by formail
       which will make sure that it always contains the	most recent names, the
       size  of	the file is limited to a maximum of approximately 8192 bytes).
       If the name was new, an autoreply will be sent.

       As you can see, the following recipe has	comments  between  the	condi-
       tions.	This  is  allowed.   Do	not put	comments on the	same line as a
       condition though.

	      SHELL=/bin/sh    # for other shells, this	might need adjustment

	      :0 Whc: vacation.lock
	       # Perform a quick check to see if the mail was addressed	to us
	      *	$^To:.*\<$\LOGNAME\>
	       # Don't reply to	daemons	and mailinglists
	      *	!^FROM_DAEMON
	       # Mail loops are	evil
	      *	!^X-Loop: your@own.mail.address
	      |	formail	-rD 8192 vacation.cache

		:0 ehc	       # if the	name was not in	the cache
		| (formail -rI"Precedence: junk" \
		     -A"X-Loop:	your@own.mail.address" ; \
		   echo	"I received your mail,"; \
		   echo	"but I won't be	back until Monday."; \
		   echo	"-- "; cat $HOME/.signature \
		  ) | $SENDMAIL	-oi -t

       Store all messages concerning TeX in separate, unique filenames,	 in  a
       directory named texmail (this directory has to exist); there is no need
       to use lockfiles	in this	case, so we won't.

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail

       The same	as above, except now we	store the mails	in numbered files  (MH
       mail folder).

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail/.

       Or  you	could  file  the mail in several directory folders at the same
       time.  The following recipe will	deliver	the mail to two	MH-folders and
       one  directory  folder.	 It  is	 actually only one file	with two extra
       hardlinks.

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail/.	wordprocessing dtp/.

       Store all the messages about meetings in	a folder that is in  a	direc-
       tory  that  changes  every  month.   E.g.  if it	were January 1994, the
       folder would have the name `94-01/meeting' and the locallockfile	 would
       be `94-01/meeting.lock'.

	      :0:
	      *	meeting
	      `date +%y-%m`/meeting

       The same	as above, but, if the `94-01' directory	wouldn't have existed,
       it is created automatically:

	      MONTHFOLDER=`date	+%y-%m`

	      :0 Wic
	      *	? test ! -d $MONTHFOLDER
	      |	mkdir $MONTHFOLDER

	      :0:
	      *	meeting
	      ${MONTHFOLDER}/meeting

       The same	as above, but now by slightly different	means:

	      MONTHFOLDER=`date	+%y-%m`
	      DUMMY=`test -d $MONTHFOLDER || mkdir $MONTHFOLDER`

	      :0:
	      *	meeting
	      ${MONTHFOLDER}/meeting

       If you are subscribed to	several	mailinglists and people	cross-post  to
       some  of	 them,	you  usually receive several duplicate mails (one from
       every list).  The following simple recipe eliminates  duplicate	mails.
       It  tells  formail to keep an 8KB cache file in which it	will store the
       Message-IDs of the most recent mails you	received.   Since  Message-IDs
       are guaranteed to be unique for every new mail, they are	ideally	suited
       to weed out duplicate mails.  Simply put	the following  recipe  at  the
       top of your rcfile, and no duplicate mail will get past it.

	      :0 Wh: msgid.lock
	      |	formail	-D 8192	msgid.cache

       Beware  if  you	have  delivery	problems in recipes below this one and
       procmail	tries to requeue the mail, then	on the next  queue  run,  this
       mail will be considered a duplicate and will be thrown away.  For those
       not quite so confident in their own scripting capabilities, you can use
       the  following recipe instead.  It puts duplicates in a separate	folder
       instead of throwing them	away.  It is up	to you to  periodically	 empty
       the folder of course.

	      :0 Whc: msgid.lock
	      |	formail	-D 8192	msgid.cache

	      :0 a:
	      duplicates

       Procmail	 can  deliver  to MH folders directly, but, it does not	update
       the unseen sequences the	real MH	manages.   If  you  want  procmail  to
       update  those  as well, use a recipe like the following which will file
       everything that contains	the word spam in the body of the mail into  an
       MH  folder  called  spamfold.  Note the local lockfile, which is	needed
       because MH programs do not lock the sequences file.  Asynchronous invo-
       cations	of  MH	programs  that change the sequences file may therefore
       corrupt it or  silently	lose  changes.	 Unfortunately,	 the  lockfile
       doesn't completely solve	the problem as rcvstore	could be invoked while
       `show' or `mark'	or some	other MH program is running.  This problem  is
       expected	 to  be	 fixed	in  some future	version	of MH, but until then,
       you'll have to balance the risk of lost or  corrupt  sequences  against
       the benefits of the unseen sequence.

	      :0 :spamfold/$LOCKEXT
	      *	B ?? spam
	      |	rcvstore +spamfold

       When  delivering	 to  emacs  folders  (i.e., mailfolders	managed	by any
       emacs mail package, e.g., RMAIL or VM) directly,	you should use	emacs-
       compatible lockfiles.  The emacs	mailers	are a bit braindamaged in that
       respect,	they get very upset if someone delivers	to  mailfolders	 which
       they  already  have  in	their  internal	buffers.  The following	recipe
       assumes that $HOME equals /home/john.

	      MAILDIR=Mail

	      :0:/usr/local/lib/emacs/lock/!home!john!Mail!mailbox
	      *	^Subject:.*whatever
	      mailbox

       Alternatively, you can have procmail deliver into its own set of	 mail-
       boxes,  which  you  then	periodically empty and copy over to your emacs
       files using movemail.  Movemail uses mailbox.lock local	lockfiles  per
       mailbox.	  This actually	is the preferred mode of operation in conjunc-
       tion with procmail.

       To extract certain headers from a mail and put  them  into  environment
       variables you can use any of the	following constructs:

	      SUBJECT=`formail -xSubject:`    #	regular	field
	      FROM=`formail -rt	-xTo:`	      #	special	case

	      :0 h			      #	alternate method
	      KEYWORDS=| formail -xKeywords:

       If you are using	temporary files	in a procmailrc	file, and want to make
       sure that they are removed just before procmail exits,  you  could  use
       something along the lines of:

	      TEMPORARY=$HOME/tmp/pmail.$$
	      TRAP="/bin/rm -f $TEMPORARY"

       The  TRAP  keyword can also be used to change the exitcode of procmail.
       I.e. if you want	procmail to return an exitcode of `1' instead  of  its
       regular exitcodes, you could use:

	      EXITCODE=""
	      TRAP="exit 1;"   # The trailing semi-colon is important
			       # since exit is not a standalone	program

       Or,  if	the  exitcode does not need to depend on the programs run from
       the TRAP, you can use a mere:

	      EXITCODE=1

       The following recipe prints every incoming mail that looks like a post-
       script file.

	      :0 Bb
	      *	^^%!
	      |	lpr

       The  following  recipe  does the	same, but is a bit more	selective.  It
       only prints the postscript file if it comes from	the print-server.  The
       first  condition	matches	only if	it is found in the header.  The	second
       condition only matches at the start of the body.

	      :0 b
	      *	^From[ :].*print-server
	      *	B ?? ^^%!
	      |	lpr

       The same	as above, but now by slightly different	means:

	      :0
	      *	^From[ :].*print-server
	      {
		:0 B b
		* ^^%!
		| lpr
	      }

       Likewise:

	      :0 HB b
	      *	^^(.+$)*From[ :].*print-server
	      *	^^(.+$)*^%!
	      |	lpr

       Suppose you have	two accounts, you use  both  accounts  regularly,  but
       they  are  in  very  distinct places (i.e., you can only	read mail that
       arrived at either one of	the accounts).	You would like to forward mail
       arriving	 at account one	to account two,	and the	other way around.  The
       first thing that	comes to mind is using .forward	files at  both	sites;
       this  won't  work  of  course,  since you will be creating a mail loop.
       This mail loop can be avoided by	 inserting  the	 following  recipe  in
       front  of  all  other  recipes  in  the $HOME/.procmailrc files on both
       sites.  If you make sure	that you add the same X-Loop:  field  at  both
       sites,  mail  can  now  safely  be  forwarded to	the other account from
       either of them.

	      :0 c
	      *	!^X-Loop: yourname@your.main.mail.address
	      |	formail	-A "X-Loop: yourname@your.main.mail.address" | \
		 $SENDMAIL -oi yourname@the.other.account

       If someone sends	you a mail with	the word `retrieve'  in	 the  subject,
       the following will automatically	send back the contents of info_file to
       the sender.  Like in all	recipes	where we send mail, we watch  out  for
       mail loops.

	      :0
	      *	!^From +YOUR_USERNAME
	      *	!^Subject:.*Re:
	      *	!^FROM_DAEMON
	      *	^Subject:.*retrieve
	      |	(formail -r ; cat info_file) | $SENDMAIL -oi -t

       Now follows an example for a very simple	fileserver accessible by mail.
       For more	demanding applications,	I suggest you take a look at SmartList
       (available  from	 the  same  place  as  the procmail distribution).  As
       listed, this fileserver sends back at most one  file  per  request,  it
       ignores	the body of incoming mails, the	Subject: line has to look like
       "Subject: send file the_file_you_want" (the blanks are significant), it
       does  not return	files that have	names starting with a dot, nor does it
       allow files to be retrieved that	are outside the	 fileserver  directory
       tree  (if  you decide to	munge this example, make sure you do not inad-
       vertently loosen	this last restriction).

	      :0
	      *	^Subject: send file [0-9a-z]
	      *	!^X-Loop: yourname@your.main.mail.address
	      *	!^Subject:.*Re:
	      *	!^FROM_DAEMON
	      *	!^Subject: send	file .*[/.]\.
	      {
		MAILDIR=$HOME/fileserver # chdir to the	fileserver directory

		:0 fhw			 # reverse mailheader and extract name
		* ^Subject: send file \/[^ ]*
		| formail -rA "X-Loop: yourname@your.main.mail.address"

		FILE="$MATCH"		 # the requested filename

		:0 ah
		| cat -	./$FILE	2>&1 | $SENDMAIL -oi -t
	      }

       The following example preconverts all plain-text	mail arriving in  cer-
       tain encoded MIME formats into a	more compact 8-bit format which	can be
       used and	displayed more easily by most programs.	 The mimencode(1) pro-
       gram is part of Nathaniel Borenstein's metamail package.

	      :0
	      *	^Content-Type: *text/plain
	      {
		:0 fbw
		* ^Content-Transfer-Encoding: *quoted-printable
		| mimencode -u -q

		   :0 Afhw
		   | formail -I	"Content-Transfer-Encoding: 8bit"

		:0 fbw
		* ^Content-Transfer-Encoding: *base64
		| mimencode -u -b

		   :0 Afhw
		   | formail -I	"Content-Transfer-Encoding: 8bit"
	      }

       The following one is rather exotic, but it only serves to demonstrate a
       feature.	 Suppose you  have  a  file  in	 your  HOME  directory	called
       ".urgent",  and the (one) person	named in that file is the sender of an
       incoming	mail, you'd like that mail to  be  stored  in  $MAILDIR/urgent
       instead	of  in any of the normal mailfolders it	would have been	sorted
       in.  Then this  is  what	 you  could  do	 (beware,  the	filelength  of
       $HOME/.urgent should be well below $LINEBUF, increase LINEBUF if	neces-
       sary):

	      URGMATCH=`cat $HOME/.urgent`

	      :0:
	      *	$^From.*${URGMATCH}
	      urgent

       An entirely different application for procmail would be	to  condition-
       ally  apply  filters  to	 a certain (outgoing) text or mail.  A typical
       example would be	a filter through which you pipe	all outgoing mail,  in
       order to	make sure that it will be MIME encoded only if it needs	to be.
       I.e. in this case you could start procmail in  the  middle  of  a  pipe
       like:

	      cat newtext | procmail ./mimeconvert | mail chris@where.ever

       The  mimeconvert	 rcfile	 could	contain	something like (the =0x80= and
       =0xff= should be	substituted with the real 8-bit	characters):

	      DEFAULT=|	    # pipe to stdout instead of
			    # delivering mail as usual
	      :0 Bfbw
	      *	[=0x80=-=0xff=]
	      |	mimencode -q

		:0 Afhw
		| formail -I 'MIME-Version: 1.0' \
		   -I 'Content-Type: text/plain; charset=ISO-8859-1' \
		   -I 'Content-Transfer-Encoding: quoted-printable'

SEE ALSO
       procmail(1), procmailrc(5), procmailsc(5), sh(1), csh(1), mail(1),
       mailx(1), binmail(1), uucp(1), aliases(5), sendmail(8), egrep(1),
       grep(1),	biff(1), comsat(8), mimencode(1), lockfile(1), formail(1)

AUTHORS
       Stephen R. van den Berg
	      <srb@cuci.nl>
       Philip A. Guenther
	      <guenther@sendmail.com>

BuGless				  2001/08/04			 PROCMAILEX(5)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=procmailex&sektion=5&manpath=FreeBSD+8.2-RELEASE+and+Ports>

home | help