Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PROCMAILEX(5)		      File Formats Manual		 PROCMAILEX(5)

NAME
       procmailex - procmail rcfile examples

SYNOPSIS
       $HOME/.procmailrc examples

DESCRIPTION
       For a description of the	rcfile format see procmailrc(5).

       The  weighted  scoring  technique  is  described	in detail in the proc-
       mailsc(5) man page.

       This man	page shows several example recipes.  For examples of  complete
       rcfiles	you can	check the NOTES	section	in procmail(1),	or look	at the
       example rcfiles in /usr/share/doc/procmail/examples.

EXAMPLES
       Sort out	all mail coming	from the  scuba-dive  mailing  list  into  the
       mailfolder scubafile (uses the locallockfile scubafile.lock).

	      :0:
	      *	^TOscuba
	      scubafile

       Forward all mail	from peter about compilers to william (and keep	a copy
       of it here in petcompil).

	      :0
	      *	^From.*peter
	      *	^Subject:.*compilers
	      {
		 :0 c
		 ! william@somewhere.edu

		 :0
		 petcompil
	      }

       An equivalent solution that accomplishes	the same:

	      :0 c
	      *	^From.*peter
	      *	^Subject:.*compilers
	      !	william@somewhere.edu

		 :0 A
		 petcompil

       An equivalent, but slightly slower solution that	accomplishes the same:

	      :0 c
	      *	^From.*peter
	      *	^Subject:.*compilers
	      !	william@somewhere.edu

	      :0
	      *	^From.*peter
	      *	^Subject:.*compilers
	      petcompil

       If you are fairly new to	procmail and plan to experiment	a  little  bit
       it  often  helps	to have	a safety net of	some sort.  Inserting the fol-
       lowing two recipes above	all other recipes will make sure that  of  all
       arriving	 mail always the last 32 messages will be preserved.  In order
       for it to work as intended,  you	 have  to  create  a  directory	 named
       `backup'	in $MAILDIR prior to inserting these two recipes.

	      :0 c
	      backup

	      :0 ic
	      |	cd backup && rm	-f dummy `ls -t	msg.* |	sed -e 1,32d`

       If  your	system doesn't generate	or generates incorrect leading `From '
       lines on	every mail, you	can fix	this by	calling	up procmail  with  the
       -f- option.  To fix the same problem by different means,	you could have
       inserted	the following recipe above all other recipes in	 your  rcfile.
       They  will  filter  the	header	of any mail through formail which will
       strip any leading `From ',  and	automatically  regenerates  it	subse-
       quently.

	      :0 fhw
	      |	formail	-I "From " -a "From "

       Add the headers of all messages that didn't come	from the postmaster to
       your private header collection (for statistics or mail debugging);  and
       use  the	 lockfile `headc.lock'.	 In order to make sure the lockfile is
       not removed until the pipe has finished,	you  have  to  specify	option
       `w';  otherwise	the  lockfile would be removed as soon as the pipe has
       accepted	the mail.

	      :0 hwc:
	      *	!^FROM_MAILER
	      |	uncompress headc.Z; cat	>>headc; compress headc

       Or, if you would	use the	more efficient gzip instead of compress:

	      :0 hwc:
	      *	!^FROM_MAILER
	      |	gzip >>headc.gz

       Forward all mails shorter than 1000 bytes to my home address (no	 lock-
       file needed on this recipe).

	      :0
	      *	< 1000
	      !	myname@home

       Split  up incoming digests from the surfing mailing list	into their in-
       dividual	messages, and store them into surfing, using  surfing.lock  as
       the locallockfile.

	      :0:
	      *	^Subject:.*surfing.*Digest
	      |	formail	+1 -ds >>surfing

       Store  everything  coming  from	the  postmaster	or mailer-daemon (like
       bounced mail) into the file postm, using	postm.lock as  the  locallock-
       file.

	      :0:
	      *	^FROM_MAILER
	      postm

       A  simple  autoreply  recipe.  It makes sure that neither mail from any
       daemon (like bouncing mail or mail from mailing-lists), nor autoreplies
       coming  from yourself will be autoreplied to.  If this precaution would
       not be taken, disaster could result (`ringing'  mail).	In  order  for
       this recipe to autoreply	to all the incoming mail, you should of	course
       insert it before	all other recipes in your rcfile.  However, it is  ad-
       visable	to  put	 it after any recipes that process the mails from sub-
       scribed mailinglists; it	generally is not a good	idea to	 generate  au-
       toreplies to mailinglists (yes, the !^FROM_DAEMON regexp	should already
       catch those, but	if the mailinglist  doesn't  follow  accepted  conven-
       tions, this might not be	enough).

	      :0 h c
	      *	!^FROM_DAEMON
	      *	!^X-Loop: your@own.mail.address
	      |	(formail -r -I"Precedence: junk" \
		  -A"X-Loop: your@own.mail.address" ; \
		 echo "Mail received.")	| $SENDMAIL -t

       A  more	complicated  autoreply	recipe	that implements	the functional
       equivalent of the well known vacation(1)	program.  This recipe is based
       on  the	same  principles as the	last one (prevent `ringing' mail).  In
       addition	to that	however, it maintains a	vacation database by  extract-
       ing  the	name of	the sender and inserting it in the vacation.cache file
       if the name was new (the	vacation.cache file is maintained  by  formail
       which will make sure that it always contains the	most recent names, the
       size of the file	is limited to a	maximum	of approximately 8192  bytes).
       If the name was new, an autoreply will be sent.

       As  you	can  see, the following	recipe has comments between the	condi-
       tions.  This is allowed.	 Do not	put comments on	the  same  line	 as  a
       condition though.

	      SHELL=/bin/sh    # only needed for older versions	of procmail

	      :0 Whc: vacation.lock
	       # Perform a quick check to see if the mail was addressed	to us
	      *	$^To:.*\<$\LOGNAME\>
	       # Don't reply to	daemons	and mailinglists
	      *	!^FROM_DAEMON
	       # Mail loops are	evil
	      *	!^X-Loop: your@own.mail.address
	      |	formail	-rD 8192 vacation.cache

		:0 ehc	       # if the	name was not in	the cache
		| (formail -rI"Precedence: junk" \
		     -A"X-Loop:	your@own.mail.address" ; \
		   echo	"I received your mail,"; \
		   echo	"but I won't be	back until Monday."; \
		   echo	"-- "; cat $HOME/.signature \
		  ) | $SENDMAIL	-oi -t

       Store  all  messages concerning TeX in separate,	unique filenames, in a
       directory named texmail (this directory has to exist); there is no need
       to use lockfiles	in this	case, so we won't.

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail

       The  same as above, except now we store the mails in numbered files (MH
       mail folder).

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail/.

       Or you could file the mail in several directory	folders	 at  the  same
       time.  The following recipe will	deliver	the mail to two	MH-folders and
       one directory folder.  It is actually only  one	file  with  two	 extra
       hardlinks.

	      :0
	      *	(^TO|^Subject:.*)TeX[^t]
	      texmail/.	wordprocessing dtp/.

       Store  all  the messages	about meetings in a folder that	is in a	direc-
       tory that changes every month.  E.g.  if	 it  were  January  1994,  the
       folder  would have the name `94-01/meeting' and the locallockfile would
       be `94-01/meeting.lock'.

	      :0:
	      *	meeting
	      `date +%y-%m`/meeting

       The same	as above, but, if the `94-01' directory	wouldn't have existed,
       it is created automatically:

	      MONTHFOLDER=`date	+%y-%m`

	      :0 Wic
	      *	? test ! -d $MONTHFOLDER
	      |	mkdir $MONTHFOLDER

	      :0:
	      *	meeting
	      ${MONTHFOLDER}/meeting

       The same	as above, but now by slightly different	means:

	      MONTHFOLDER=`date	+%y-%m`
	      DUMMY=`test -d $MONTHFOLDER || mkdir $MONTHFOLDER`

	      :0:
	      *	meeting
	      ${MONTHFOLDER}/meeting

       If  you are subscribed to several mailinglists and people cross-post to
       some of them, you usually receive several duplicate mails (one from ev-
       ery list).  The following simple	recipe eliminates duplicate mails.  It
       tells formail to	keep an	8KB cache file in which	it will	store the Mes-
       sage-IDs	 of the	most recent mails you received.	 Since Message-IDs are
       guaranteed to be	unique for every new mail, they	are ideally suited  to
       weed  out  duplicate mails.  Simply put the following recipe at the top
       of your rcfile, and no duplicate	mail will get past it.

	      :0 Wh: msgid.lock
	      |	formail	-D 8192	msgid.cache

       Beware if you have delivery problems in	recipes	 below	this  one  and
       procmail	 tries	to  requeue the	mail, then on the next queue run, this
       mail will be considered a duplicate and will be thrown away.  For those
       not quite so confident in their own scripting capabilities, you can use
       the following recipe instead.  It puts duplicates in a separate	folder
       instead	of  throwing them away.	 It is up to you to periodically empty
       the folder of course.

	      :0 Whc: msgid.lock
	      |	formail	-D 8192	msgid.cache

	      :0 a:
	      duplicates

       Procmail	can deliver to MH folders directly, but, it  does  not	update
       the  unseen sequences the real MH manages.  If you want procmail	to up-
       date those as well, use a recipe	like the following which will file ev-
       erything	that contains the word spam in the body	of the mail into an MH
       folder called spamfold.	Note the local lockfile, which is  needed  be-
       cause MH	programs do not	lock the sequences file.  Asynchronous invoca-
       tions of	MH programs that change	the sequences file may therefore  cor-
       rupt  it	or silently lose changes.  Unfortunately, the lockfile doesn't
       completely solve	the problem as rcvstore	could be invoked while	`show'
       or  `mark'  or  some  other MH program is running.  This	problem	is ex-
       pected to be fixed in some future version of MH,	but until then,	you'll
       have to balance the risk	of lost	or corrupt sequences against the bene-
       fits of the unseen sequence.

	      :0 :spamfold/$LOCKEXT
	      *	B ?? spam
	      |	rcvstore +spamfold

       When delivering to emacs	folders	 (i.e.,	 mailfolders  managed  by  any
       emacs  mail package, e.g., RMAIL	or VM) directly, you should use	emacs-
       compatible lockfiles.  The emacs	mailers	are a bit braindamaged in that
       respect,	 they  get very	upset if someone delivers to mailfolders which
       they already have in their internal buffers.  The following recipe  as-
       sumes that $HOME	equals /home/john.

	      MAILDIR=Mail

	      :0:/usr/local/lib/emacs/lock/!home!john!Mail!mailbox
	      *	^Subject:.*whatever
	      mailbox

       Alternatively,  you can have procmail deliver into its own set of mail-
       boxes, which you	then periodically empty	and copy over  to  your	 emacs
       files  using  movemail.	Movemail uses mailbox.lock local lockfiles per
       mailbox.	 This actually is the preferred	mode of	operation in  conjunc-
       tion with procmail.

       To  extract  certain  headers from a mail and put them into environment
       variables you can use any of the	following constructs:

	      SUBJECT=`formail -xSubject:`    #	regular	field
	      FROM=`formail -rt	-xTo:`	      #	special	case

	      :0 h			      #	alternate method
	      KEYWORDS=| formail -xKeywords:

       If you are using	temporary files	in a procmailrc	file, and want to make
       sure  that  they	 are removed just before procmail exits, you could use
       something along the lines of:

	      TEMPORARY=$HOME/tmp/pmail.$$
	      TRAP="/bin/rm -f $TEMPORARY"

       The TRAP	keyword	can also be used to change the exitcode	 of  procmail.
       I.e.  if	 you want procmail to return an	exitcode of `1'	instead	of its
       regular exitcodes, you could use:

	      EXITCODE=""
	      TRAP="exit 1;"   # The trailing semi-colon is important
			       # since exit is not a standalone	program

       Or, if the exitcode does	not need to depend on the  programs  run  from
       the TRAP, you can use a mere:

	      EXITCODE=1

       The following recipe prints every incoming mail that looks like a post-
       script file.

	      :0 Bb
	      *	^^%!
	      |	lpr

       The following recipe does the same, but is a bit	 more  selective.   It
       only prints the postscript file if it comes from	the print-server.  The
       first condition matches only if it is found in the header.  The	second
       condition only matches at the start of the body.

	      :0 b
	      *	^From[ :].*print-server
	      *	B ?? ^^%!
	      |	lpr

       The same	as above, but now by slightly different	means:

	      :0
	      *	^From[ :].*print-server
	      {
		:0 B b
		* ^^%!
		| lpr
	      }

       Likewise:

	      :0 HB b
	      *	^^(.+$)*From[ :].*print-server
	      *	^^(.+$)*^%!
	      |	lpr

       Suppose	you  have  two	accounts, you use both accounts	regularly, but
       they are	in very	distinct places	(i.e., you can only read mail that ar-
       rived  at  either one of	the accounts).	You would like to forward mail
       arriving	at account one to account two, and the other way around.   The
       first  thing  that comes	to mind	is using .forward files	at both	sites;
       this won't work of course, since	you will  be  creating	a  mail	 loop.
       This  mail  loop	 can  be  avoided by inserting the following recipe in
       front of	all other recipes  in  the  $HOME/.procmailrc  files  on  both
       sites.	If  you	 make sure that	you add	the same X-Loop: field at both
       sites, mail can now safely be forwarded to the other account  from  ei-
       ther of them.

	      :0 c
	      *	!^X-Loop: yourname@your.main.mail.address
	      |	formail	-A "X-Loop: yourname@your.main.mail.address" | \
		 $SENDMAIL -oi yourname@the.other.account

       If  someone  sends  you a mail with the word `retrieve' in the subject,
       the following will automatically	send back the contents of info_file to
       the  sender.   Like in all recipes where	we send	mail, we watch out for
       mail loops.

	      :0
	      *	!^From +YOUR_USERNAME
	      *	!^Subject:.*Re:
	      *	!^FROM_DAEMON
	      *	^Subject:.*retrieve
	      |	(formail -r ; cat info_file) | $SENDMAIL -oi -t

       Now follows an example for a very simple	fileserver accessible by mail.
       For more	demanding applications,	I suggest you take a look at SmartList
       (available from the same	 place	as  the	 procmail  distribution).   As
       listed, this fileserver sends back at most one file per request,	it ig-
       nores the body of incoming mails, the Subject: line has	to  look  like
       "Subject: send file the_file_you_want" (the blanks are significant), it
       does not	return files that have names starting with a dot, nor does  it
       allow  files  to	be retrieved that are outside the fileserver directory
       tree (if	you decide to munge this example, make sure you	do  not	 inad-
       vertently loosen	this last restriction).

	      :0
	      *	^Subject: send file [0-9a-z]
	      *	!^X-Loop: yourname@your.main.mail.address
	      *	!^Subject:.*Re:
	      *	!^FROM_DAEMON
	      *	!^Subject: send	file .*[/.]\.
	      {
		MAILDIR=$HOME/fileserver # chdir to the	fileserver directory

		:0 fhw			 # reverse mailheader and extract name
		* ^Subject: send file \/[^ ]*
		| formail -rA "X-Loop: yourname@your.main.mail.address"

		FILE="$MATCH"		 # the requested filename

		:0 ah
		| cat -	./$FILE	2>&1 | $SENDMAIL -oi -t
	      }

       The  following example preconverts all plain-text mail arriving in cer-
       tain encoded MIME formats into a	more compact 8-bit format which	can be
       used and	displayed more easily by most programs.	 The mimencode(1) pro-
       gram is part of Nathaniel Borenstein's metamail package.

	      :0
	      *	^Content-Type: *text/plain
	      {
		:0 fbw
		* ^Content-Transfer-Encoding: *quoted-printable
		| mimencode -u -q

		   :0 Afhw
		   | formail -I	"Content-Transfer-Encoding: 8bit"

		:0 fbw
		* ^Content-Transfer-Encoding: *base64
		| mimencode -u -b

		   :0 Afhw
		   | formail -I	"Content-Transfer-Encoding: 8bit"
	      }

       The following one is rather exotic, but it only serves to demonstrate a
       feature.	  Suppose  you have a file in your HOME	directory called ".ur-
       gent", and the (one) person named in that file is the sender of an  in-
       coming  mail,  you'd like that mail to be stored	in $MAILDIR/urgent in-
       stead of	in any of the normal mailfolders it would have been sorted in.
       Then this is what you could do (beware, the filelength of $HOME/.urgent
       should be well below $LINEBUF, increase LINEBUF if necessary):

	      URGMATCH=`cat $HOME/.urgent`

	      :0:
	      *	$^From.*${URGMATCH}
	      urgent

       An entirely different application for procmail would be	to  condition-
       ally apply filters to a certain (outgoing) text or mail.	 A typical ex-
       ample would be a	filter through which you pipe all  outgoing  mail,  in
       order to	make sure that it will be MIME encoded only if it needs	to be.
       I.e. in this case you could start procmail in  the  middle  of  a  pipe
       like:

	      cat newtext | procmail ./mimeconvert | mail chris@where.ever

       The  mimeconvert	 rcfile	 could	contain	something like (the =0x80= and
       =0xff= should be	substituted with the real 8-bit	characters):

	      DEFAULT=|	    # pipe to stdout instead of
			    # delivering mail as usual
	      :0 Bfbw
	      *	[=0x80=-=0xff=]
	      |	mimencode -q

		:0 Afhw
		| formail -I 'MIME-Version: 1.0' \
		   -I 'Content-Type: text/plain; charset=ISO-8859-1' \
		   -I 'Content-Transfer-Encoding: quoted-printable'

SEE ALSO
       procmail(1), procmailrc(5), procmailsc(5), sh(1), csh(1), mail(1),
       mailx(1), uucp(1), aliases(5), sendmail(8), egrep(1), grep(1), biff(1),
       comsat(8), mimencode(1),	lockfile(1), formail(1)

AUTHORS
       Stephen R. van den Berg
	      <srb@cuci.nl>

				    BuGless			 PROCMAILEX(5)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=procmailex&sektion=5&manpath=FreeBSD+13.1-RELEASE+and+Ports>

home | help