Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
PR(1)                   FreeBSD General Commands Manual                  PR(1)

     pr - print files

     pr [+page] [-column] [-adFfmprt] [[-e] [char] [gap]] [-L locale]
        [-h header] [[-i] [char] [gap]] [-l lines] [-o offset] [[-s] [char]]
        [[-n] [char] [width]] [-w width] [-] [file ...]

     The pr utility is a printing and pagination filter for text files.  When
     multiple input files are specified, each is read, formatted, and written
     to standard output.  By default, the input is separated into 66-line
     pages, each with

     +o   A 5-line header with the page number, date, time, and the pathname of
         the file.

     +o   A 5-line trailer consisting of blank lines.

     If standard output is associated with a terminal, diagnostic messages are
     suppressed until the pr utility has completed processing.

     When multiple column output is specified, text columns are of equal
     width.  By default text columns are separated by at least one _blank_.
     Input lines that do not fit into a text column are truncated.  Lines are
     not truncated under single column output.

     In the following option descriptions, column, lines, offset, page, and
     width are positive decimal integers and gap is a nonnegative decimal

           Begin output at page number page of the formatted input.

           Produce output that is columns wide (default is 1) that is written
           vertically down each column in the order in which the text is
           received from the input file.  The options -e and -i are assumed.
           This option should not be used with -m.  When used with -t, the
           minimum number of lines is used to display the output.  (To
           columnify and reshape text files more generally and without
           additional formatting, see the rs(1) utility.)

     -a    Modify the effect of the -column option so that the columns are
           filled across the page in a round-robin order (e.g., when column is
           2, the first input line heads column 1, the second heads column 2,
           the third is the second line in column 1, etc.).  This option
           requires the use of the -column option.

     -d    Produce output that is double spaced.  An extra _newline_ character
           is output following every _newline_ found in the input.

     -e [char][gap]
           Expand each input _tab_ to the next greater column position
           specified by the formula n*gap+1, where n is an integer > 0.  If
           gap is zero or is omitted the default is 8.  All _tab_ characters
           in the input are expanded into the appropriate number of _space_s.
           If any nondigit character, char, is specified, it is used as the
           input tab character.

     -F    Use a _form-feed_ character for new pages, instead of the default
           behavior that uses a sequence of _newline_ characters.

     -f    Same as -F but pause before beginning the first page if standard
           output is a terminal.

     -h header
           Use the string header to replace the file name in the header line.

     -i [char][gap]
           In output, replace multiple _space_s with _tab_s whenever two or
           more adjacent _space_s reach column positions gap+1, 2*gap+1, etc.
           If gap is zero or omitted, default _tab_ settings at every eighth
           column position is used.  If any nondigit character, char, is
           specified, it is used as the output _tab_ character.

     -L locale
           Use locale specified as argument instead of one found in
           environment.  Use "C" to reset locale to default.

     -l lines
           Override the 66 line default and reset the page length to lines.
           If lines is not greater than the sum of both the header and trailer
           depths (in lines), the pr utility suppresses output of both the
           header and trailer, as if the -t option were in effect.

     -m    Merge the contents of multiple files.  One line from each file
           specified by a file operand is written side by side into text
           columns of equal fixed widths, in terms of the number of column
           positions.  The number of text columns depends on the number of
           file operands successfully opened.  The maximum number of files
           merged depends on page width and the per process open file limit.
           The options -e and -i are assumed.

     -n [char][width]
           Provide width digit line numbering.  The default for width, if not
           specified, is 5.  The number occupies the first width column
           positions of each text column or each line of -m output.  If char
           (any nondigit character) is given, it is appended to the line
           number to separate it from whatever follows.  The default for char
           is a _tab_.  Line numbers longer than width columns are truncated.

     -o offset
           Each line of output is preceded by offset _spaces_s.  If the -o
           option is not specified, the default is zero.  The space taken is
           in addition to the output line width.

     -p    Pause before each page if the standard output is a terminal.  pr
           will write an alert character to standard error and wait for a
           carriage return to be read on the terminal.

     -r    Write no diagnostic reports on failure to open a file.

     -s char
           Separate text columns by the single character char instead of by
           the appropriate number of _space_s (default for char is the _tab_

     -t    Print neither the five-line identifying header nor the five-line
           trailer usually supplied for each page.  Quit printing after the
           last line of each file without spacing to the end of the page.

     -w width
           Set the width of the line to width column positions for multiple
           text-column output only.  If the -w option is not specified and the
           -s option is not specified, the default width is 72.  If the -w
           option is not specified and the -s option is specified, the default
           width is 512.

     file  A pathname of a file to be printed.  If no file operands are
           specified, or if a file operand is `-', the standard input is used.
           The standard input is used only if no file operands are specified,
           or if a file operand is `-'.

     The -s option does not allow the option letter to be separated from its
     argument, and the options -e, -i, and -n require that both arguments, if
     present, not be separated from the option letter.

     If pr receives an interrupt while printing to a terminal, it flushes all
     accumulated error messages to the screen before terminating.

     The pr utility exits 0 on success, and 1 if an error occurs.

     Error messages are written to standard error during the printing process
     (if output is redirected) or after all successful file printing is
     complete (when printing to a terminal).

     cat(1), more(1), rs(1)

     The pr utility is IEEE Std 1003.1-2001 (``POSIX.1'') compatible.

     A pr command appeared in Version 1 AT&T UNIX.

FreeBSD 11.0-PRERELEASE       September 20, 2001       FreeBSD 11.0-PRERELEASE


Want to link to this manual page? Use this URL:

home | help