Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
Ppmchange User Manual(0)			      Ppmchange	User Manual(0)

NAME
       ppmchange - change all pixels of	one color to another in	a PPM image

SYNOPSIS
       ppmchange

       [-closeness=closeness_percent]  [-remainder=remainder_color] [-closeok]
       [oldcolor newcolor] ...	[ppmfile]

EXAMPLES
       ppmchange red blue redimage.ppm >blueimage.ppm

       ppmchange red red -remainder=black myimage.ppm >redblack.ppm

       ppmchange -closeness=10 white white black black

DESCRIPTION
       This program is part of Netpbm(1).

       ppmchange reads a PPM image as input and	changes	all  pixels  of	 color
       oldcolor	to color newcolor.

       You  may	specify	up to 256 oldcolor/newcolor pairs on the command line.
       ppmchange leaves	all colors not mentioned unchanged, unless you specify
       the -remainder option, in which case they are all changed to the	single
       specified color.

       You can specify that colors similar, but	not identical, to the ones you
       specify get replaced by specifying a "closeness"	factor.

       Specify	 the   colors	as   described	 for   the   argument  of  the
       pnm_parsecolor()	library	routine	<libnetpbm_image.html#colorname> .

       If a pixel matches two different	oldcolors, ppmchange replaces it  with
       the newcolor of the leftmost specified one.

       The  maxval of the output image is the same as that of the input	image.
       If a newcolor you specify cannot	be exactly represented in that maxval,
       ppmchange  assumes  a  color  that  is as close as possible to what you
       specified but can be represented	with your maxval.  Unless you  specify
       the -closeok option, ppmchange issues a warning that it is using	an ap-
       proximation.

       A common	way that you can have this maxval problem, where the color you
       specify cannot be represented with your maxval, is that your input is a
       PBM (black and white) image that	you are	 colorizing.   The  maxval  in
       this  case  is  1,  which  severely  limits the colors to which you can
       change.	To avoid this problem, use pamdepth to make the	maxval of your
       input  something	 consistent  with  your	colors.	 255 is	usually	a good
       choice.

       Before Netpbm 10.22 (April 2004), ppmchange always behaved  as  if  the
       user specified -closeok and there was no	-closeok option.

OPTIONS
       -closeness closeness_percent
	      closeness	 is a percentage indicating how	close to the color you
	      specified	a pixel	must be	to get replaced.  By default, it is 0,
	      which means the pixel must be the	exact color you	specified.

	      A	 pixel	gets  replaced if the distance in color	between	it and
	      the color	you specified is less than or equal to	closeness  per
	      cent of the maxval.

	      The  "distance"  in color	is defined as the Cartesian sum	of the
	      individual differences in	red, green, and	blue  intensities  be-
	      tween  the two pixels, normalized	so that	the difference between
	      black and	white is 100%.

	      This is probably simpler than what you want most the time.   You
	      probably	would  like to change colors that have similar chromi-
	      nance, regardless	of their intensity.  So	if there's a red  barn
	      that  is	variously  shadowed, you want the entire barn changed.
	      But because the shadowing	significantly changes  the  color  ac-
	      cording  to  ppmchange's distance	formula, parts of the barn are
	      probably about as	distant	in color from other parts of the  barn
	      as they are from green grass next	to the barn.

	      Maybe  ppmchange	will  be  enhanced  some day to	do chrominance
	      analysis.

	      This option was new in Netpbm 9.8	(September 2000).

       -closeok
	      This option affects how ppmchange	interprets a color you specify
	      in  the  arguments.  When	you specify this option, ppmchange may
	      use a color close	to, but	not the	same as	what you specify.  See
	      the description section <#description>  for details.

	      This  option was new in Netpbm 10.22 (April 2004).  Before that,
	      ppmchange	always behaved as if you specified this	option.

       -remainder color
	      ppmchange	changes	all pixels which are not of a color for	 which
	      you specify an explicit replacement color	on the command line to
	      color color.

	      An example application of	this is

	      ppmchange	-remainder=black red red

	      to lift only the red portions from an image, or
	      ppmchange	-remainder=black red white | ppmtopgm

	      to create	a mask file for	the red	portions of the	image.

SEE ALSO
       pgmtoppm(1), ppmcolormask(1), ppm(5)

AUTHOR
       Wilson H. Bent. Jr. (whb@usc.edu) with modifications by	Alberto	 Acco-
       mazzi (alberto@cfa.harvard.edu)

DOCUMENT SOURCE
       This  manual  page was generated	by the Netpbm tool 'makeman' from HTML
       source.	The master documentation is at

	      http://netpbm.sourceforge.net/doc/ppmchange.html

netpbm documentation		 December 2016	      Ppmchange	User Manual(0)

NAME | SYNOPSIS | EXAMPLES | DESCRIPTION | OPTIONS | SEE ALSO | AUTHOR | DOCUMENT SOURCE

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ppmchange&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help