Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
powerman(1)			   powerman			   powerman(1)

NAME
       powerman	- power	on/off nodes

SYNOPSIS
       pm [-options] -action [targets] [-action	[targets] ...]

DESCRIPTION
       powerman	 provides power	management in a	data center or compute cluster
       environment.  It	performs operations such as power on, power  off,  and
       power  cycle  via  remote power controller (RPC)	devices.  Target host-
       names are mapped	to plugs on RPC	devices	in powerman.conf(5).

OPTIONS
       -1, --on	targets
	      Power ON targets.

       -0, --off targets
	      Power OFF	targets.

       -c, --cycle targets
	      Power cycle targets.

       -r, --reset targets
	      Assert hardware reset for	targets	(if implemented	by RPC).

       -f, --flash targets
	      Turn beacon ON for targets (if implemented by RPC).

       -u, --unflash targets
	      Turn beacon OFF for targets (if implemented by RPC).

       -l, --list
	      List available targets.  If possible, output will	be  compressed
	      into a host range	(see TARGET SPECIFICATION below).

       -q, --query-all
	      Query  plug  status of all targets.  Status is not cached;  each
	      time this	option is  used,  powermand  queries  the  appropriate
	      RPC's.   Targets	connected to RPC's that	could not be contacted
	      (e.g. due	to network failure) are	reported as status  "unknown".
	      If possible, output will be compressed into host ranges.

       -Q, --query targets
	      Query plug status	of specific targets.

       -n, --soft-all
	      Query  soft power	status of all targets (if implemented by RPC).
	      In this context, a node in the OFF state could be	ON at the plug
	      but operating in standby power mode.

       -N, --soft targets
	      Query  soft  power status	of specific targets (if	implemented by
	      RPC).

       -b, --beacon-all
	      Query beacon status of all targets (if implemented by RPC).

       -B, --beacon targets
	      Query beacon status of specific targets (if implemented by RPC).

       -t, --temp-all
	      Query node temperature of	all targets (if	implemented  by	 RPC).
	      Temperature  information	is  not	interpreted by powerman	and is
	      reported as received from	the RPC	on one line per	 target,  pre-
	      fixed by target name.

       -P, --temp targets
	      Query  node  temperature	of specific targets (if	implemented by
	      RPC).

       -L, --license
	      Show powerman license information.

       -h, --server-host host[:port]
	      Connect to a powerman daemon on non-default host and  optionally
	      port.

       -V, --version
	      Display the powerman version number and exit.

       -D, --device
	      Displays RPC status information.	If targets are specified, only
	      RPC's matching the target	list are displayed.

       -T, --telemetry
	      Causes RPC telemetry information to be displayed as commands are
	      processed.  Useful for debugging device scripts.

       -x, --exprange
	      Expand host ranges in query responses.

       -g, --genders
	      If  configured  with  the	 genders(3) package, this option tells
	      powerman that targets are	genders	attributes that	 map  to  node
	      names rather than	the node names themselves.

TARGET SPECIFICATION
       powerman	 target	hostnames may be specified as comma separated or space
       separated hostnames or host ranges.  Host ranges	 are  of  the  general
       form:  prefix[n-m,l-k,...],  where  n  <	 m  and	l < k, etc., This form
       should not be confused with regular expression character	classes	 (also
       denoted	by  ``[]'').  For  example, foo[19] does not represent foo1 or
       foo9, but rather	represents a degenerate	range: foo19.

       This range syntax is meant only as a convenience	 on  clusters  with  a
       prefixNN	 naming	 convention  and specification of ranges should	not be
       considered necessary -- the list	foo1,foo9 could	be specified as	 such,
       or by the range foo[1,9].

       Some examples of	powerman targets follows:

       Power on	hosts bar,baz,foo01,foo02,...,foo05
	   powerman --on bar baz foo[01-05]

       Power on	hosts bar,foo7,foo9,foo10
	   powerman --on bar,foo[7,9-10]

       Power on	foo0,foo4,foo5
	   powerman --on foo[0,4-5]

       As a reminder to	the reader, some shells	will interpret brackets	([ and
       ]) for pattern matching.	 Depending on your shell, it may be  necessary
       to  enclose ranged lists	within quotes.	For example, in	tcsh, the last
       example above should be executed	as:
	   powerman --on "foo[0,4-5]"

FILES
       /usr/local/bin/powerman
       /usr/local/bin/pm

ORIGIN
       PowerMan	was originally developed by Andrew  Uselton  on	 LLNL's	 Linux
       clusters.  This software	is open	source and distributed under the terms
       of the GNU GPL.

SEE ALSO
       powerman(1), powermand(8), httppower(8),	plmpower(8),  vpcd(8),	power-
       man.conf(5), powerman.dev(5).

       http://code.google.com/p/powerman

powerman-2.3.20			  2014-08-26			   powerman(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | TARGET SPECIFICATION | FILES | ORIGIN | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=powerman&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help