Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
POSTFIX(1)							    POSTFIX(1)

NAME
       postfix - Postfix control program

SYNOPSIS
       postfix [-Dv] [-c config_dir] command

DESCRIPTION
       This  command  is  reserved  for	the superuser. To submit mail, use the
       Postfix sendmail(1) command.

       The postfix(1) command controls the operation of	the Postfix mail  sys-
       tem:  start  or stop the	master(8) daemon, do a health check, and other
       maintenance.

       By default, the postfix(1) command sets up a  standardized  environment
       and runs	the postfix-script shell script	to do the actual work.

       However,	 when  support	for  multiple Postfix instances	is configured,
       postfix(1) executes the command specified with the multi_instance_wrap-
       per configuration parameter.  This command will execute the command for
       each applicable Postfix instance.

       The following commands are implemented:

       check  Warn about bad directory/file ownership or permissions, and cre-
	      ate missing directories.

       start  Start  the Postfix mail system. This also	runs the configuration
	      check described above.

       stop   Stop the Postfix mail system in an orderly fashion. If possible,
	      running  processes  are  allowed	to terminate at	their earliest
	      convenience.

	      Note: in order to	refresh	the Postfix mail system	after  a  con-
	      figuration  change,  do  not  use	the start and stop commands in
	      succession. Use the reload command instead.

       abort  Stop the Postfix mail system  abruptly.  Running	processes  are
	      signaled to stop immediately.

       flush  Force delivery: attempt to deliver every message in the deferred
	      mail queue. Normally, attempts to	deliver	delayed	mail happen at
	      regular  intervals,  the	interval  doubling  after  each	failed
	      attempt.

	      Warning: flushing	undeliverable mail frequently will  result  in
	      poor delivery performance	of all other mail.

       reload Re-read  configuration  files.  Running  processes  terminate at
	      their earliest convenience.

       status Indicate if the Postfix mail system is currently running.

       set-permissions [name=value ...]
	      Set the ownership	and permissions	of Postfix related  files  and
	      directories, as specified	in the postfix-files file.

	      Specify  name=value to override and update specific main.cf con-
	      figuration parameters. Use this,	for  example,  to  change  the
	      mail_owner  or  setgid_group  setting  for  an already installed
	      Postfix system.

	      This feature is available	in Postfix 2.1 and later.  With	 Post-
	      fix  2.0	and  earlier, use "$config_directory/post-install set-
	      permissions".

       upgrade-configuration [name=value ...]
	      Update the main.cf and master.cf	files  with  information  that
	      Postfix  needs  in order to run: add or update services, and add
	      or update	configuration parameter	settings.

	      Specify name=value to override and update	specific main.cf  con-
	      figuration parameters.

	      This  feature is available in Postfix 2.1	and later.  With Post-
	      fix  2.0	and   earlier,	 use   "$config_directory/post-install
	      upgrade-configuration".

       The following options are implemented:

       -c config_dir
	      Read  the	main.cf	and master.cf configuration files in the named
	      directory	instead	of the default configuration  directory.   Use
	      this  to	distinguish  between multiple Postfix instances	on the
	      same host.

	      With Postfix 2.6 and later, this option  forces  the  postfix(1)
	      command to operate on the	specified Postfix instance only.  This
	      behavior is inherited by	postfix(1)  commands  that  run	 as  a
	      descendant of the	current	process.

       -D (with	postfix	start only)
	      Run each Postfix daemon under control of a debugger as specified
	      via the debugger_command configuration parameter.

       -v     Enable verbose  logging  for  debugging  purposes.  Multiple  -v
	      options make the software	increasingly verbose.

ENVIRONMENT
       The  postfix(1)	command	 exports  the  following environment variables
       before executing	the postfix-script file:

       MAIL_CONFIG
	      This is set when the -c command-line option is present.

	      With Postfix 2.6 and later, this environment variable forces the
	      postfix(1)  command to operate on	the specified Postfix instance
	      only.  This behavior is inherited	by  postfix(1)	commands  that
	      run as a descendant of the current process.

       MAIL_VERBOSE
	      This is set when the -v command-line option is present.

       MAIL_DEBUG
	      This is set when the -D command-line option is present.

CONFIGURATION PARAMETERS
       The following main.cf configuration parameters are exported as environ-
       ment variables with the same names:

       command_directory (see 'postconf	-d' output)
	      The location of all postfix administrative commands.

       daemon_directory	(see 'postconf -d' output)
	      The directory with Postfix support programs and daemon programs.

       config_directory	(see 'postconf -d' output)
	      The  default  location of	the Postfix main.cf and	master.cf con-
	      figuration files.

       queue_directory (see 'postconf -d' output)
	      The location of the Postfix top-level queue directory.

       mail_owner (postfix)
	      The UNIX system account that owns	the  Postfix  queue  and  most
	      Postfix daemon processes.

       setgid_group (postdrop)
	      The  group  ownership  of	set-gid	Postfix	commands and of	group-
	      writable Postfix directories.

       sendmail_path (see 'postconf -d'	output)
	      A	Sendmail compatibility feature that specifies the location  of
	      the Postfix sendmail(1) command.

       newaliases_path (see 'postconf -d' output)
	      Sendmail	compatibility  feature	that specifies the location of
	      the newaliases(1)	command.

       mailq_path (see 'postconf -d' output)
	      Sendmail compatibility feature that specifies where the  Postfix
	      mailq(1) command is installed.

       html_directory (see 'postconf -d' output)
	      The  location  of	Postfix	HTML files that	describe how to	build,
	      configure	or operate a specific Postfix subsystem	or feature.

       manpage_directory (see 'postconf	-d' output)
	      Where the	Postfix	manual pages are installed.

       readme_directory	(see 'postconf -d' output)
	      The location of Postfix README files that	describe how to	build,
	      configure	or operate a specific Postfix subsystem	or feature.

       Available in Postfix version 2.5	and later:

       data_directory (see 'postconf -d' output)
	      The  directory  with  Postfix-writable  data files (for example:
	      caches, pseudo-random numbers).

       Other configuration parameters:

       config_directory	(see 'postconf -d' output)
	      The default location of the Postfix main.cf and  master.cf  con-
	      figuration files.

       import_environment (see 'postconf -d' output)
	      The  list	 of environment	parameters that	a Postfix process will
	      import from a non-Postfix	parent process.

       syslog_facility (mail)
	      The syslog facility of Postfix logging.

       syslog_name (see	'postconf -d' output)
	      The mail system name that	is prepended to	the  process  name  in
	      syslog  records,	so  that  "smtpd" becomes, for example,	"post-
	      fix/smtpd".

       Available in Postfix version 2.6	and later:

       multi_instance_directories (empty)
	      An optional list of non-default Postfix  configuration  directo-
	      ries;  these  directories	belong to additional Postfix instances
	      that share the Postfix executable	files and  documentation  with
	      the  default  Postfix  instance,	and that are started, stopped,
	      etc., together with the default Postfix instance.

       multi_instance_wrapper (empty)
	      The pathname of a	multi-instance manager command that the	 post-
	      fix(1)   command	invokes	 when  the  multi_instance_directories
	      parameter	value is non-empty.

       multi_instance_group (empty)
	      The optional instance group name of this Postfix instance.

       multi_instance_name (empty)
	      The optional instance name of this Postfix instance.

       multi_instance_enable (no)
	      Allow this Postfix instance to be	started, stopped, etc.,	 by  a
	      multi-instance manager.

FILES
       Prior  to Postfix version 2.6, all of the following files were in $con-
       fig_directory. Some files are now in $daemon_directory so that they can
       be shared among multiple	instances that run the same Postfix version.

       Use  the	command	"postconf config_directory" or "postconf daemon_direc-
       tory" to	expand the names into their actual values.

       $config_directory/main.cf, Postfix configuration	parameters
       $config_directory/master.cf, Postfix daemon processes
       $daemon_directory/postfix-files,	file/directory permissions
       $daemon_directory/postfix-script, administrative	commands
       $daemon_directory/post-install, post-installation configuration

SEE ALSO
       Commands:
       postalias(1), create/update/query alias database
       postcat(1), examine Postfix queue file
       postconf(1), Postfix configuration utility
       postfix(1), Postfix control program
       postkick(1), trigger Postfix daemon
       postlock(1), Postfix-compatible locking
       postlog(1), Postfix-compatible logging
       postmap(1), Postfix lookup table	manager
       postmulti(1), Postfix multi-instance manager
       postqueue(1), Postfix mail queue	control
       postsuper(1), Postfix housekeeping
       mailq(1), Sendmail compatibility	interface
       newaliases(1), Sendmail compatibility interface
       sendmail(1), Sendmail compatibility interface

       Postfix configuration:
       bounce(5), Postfix bounce message templates
       master(5), Postfix master.cf file syntax
       postconf(5), Postfix main.cf file syntax
       postfix-wrapper(5), Postfix multi-instance API

       Table-driven mechanisms:
       access(5), Postfix SMTP access control table
       aliases(5), Postfix alias database
       canonical(5), Postfix input address rewriting
       generic(5), Postfix output address rewriting
       header_checks(5), body_checks(5), Postfix content inspection
       relocated(5), Users that	have moved
       transport(5), Postfix routing table
       virtual(5), Postfix virtual aliasing

       Table lookup mechanisms:
       cidr_table(5), Associate	CIDR pattern with value
       ldap_table(5), Postfix LDAP client
       lmdb_table(5), Postfix LMDB database driver
       memcache_table(5), Postfix memcache client
       mysql_table(5), Postfix MYSQL client
       nisplus_table(5), Postfix NIS+ client
       pcre_table(5), Associate	PCRE pattern with value
       pgsql_table(5), Postfix PostgreSQL client
       regexp_table(5),	Associate POSIX	regexp pattern with value
       socketmap_table(5), Postfix socketmap client
       sqlite_table(5),	Postfix	SQLite database	driver
       tcp_table(5), Postfix client-server table lookup

       Daemon processes:
       anvil(8), Postfix connection/rate limiting
       bounce(8), defer(8), trace(8), Delivery status reports
       cleanup(8), canonicalize	and enqueue message
       discard(8), Postfix discard delivery agent
       dnsblog(8), DNS black/whitelist logger
       error(8), Postfix error delivery	agent
       flush(8), Postfix fast ETRN service
       local(8), Postfix local delivery	agent
       master(8), Postfix master daemon
       oqmgr(8), old Postfix queue manager
       pickup(8), Postfix local	mail pickup
       pipe(8),	deliver	mail to	non-Postfix command
       postscreen(8), Postfix zombie blocker
       proxymap(8), Postfix lookup table proxy server
       qmgr(8),	Postfix	queue manager
       qmqpd(8), Postfix QMQP server
       scache(8), Postfix connection cache manager
       showq(8), list Postfix mail queue
       smtp(8),	lmtp(8), Postfix SMTP+LMTP client
       smtpd(8), Postfix SMTP server
       spawn(8), run non-Postfix server
       tlsmgr(8), Postfix TLS cache and	randomness manager
       tlsproxy(8), Postfix TLS	proxy server
       trivial-rewrite(8), Postfix address rewriting
       verify(8), Postfix address verification
       virtual(8), Postfix virtual delivery agent

       Other:
       syslogd(8), system logging

README FILES
       Use "postconf readme_directory" or "postconf html_directory" to	locate
       this information.
       OVERVIEW, overview of Postfix commands and processes
       BASIC_CONFIGURATION_README, Postfix basic configuration
       ADDRESS_REWRITING_README, Postfix address rewriting
       SMTPD_ACCESS_README, SMTP relay/access control
       CONTENT_INSPECTION_README, Postfix content inspection
       QSHAPE_README, Postfix queue analysis

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J.	Watson Research
       P.O. Box	704
       Yorktown	Heights, NY 10598, USA

       TLS support by:
       Lutz Jaenicke
       Brandenburg University of Technology
       Cottbus,	Germany

       Victor Duchovni
       Morgan Stanley

       SASL support originally by:
       Till Franke
       SuSE Rhein/Main AG
       65760 Eschborn, Germany

       LMTP support originally by:
       Philip A. Prindeville
       Mirapoint, Inc.
       USA.

       Amos Gouaux
       University of Texas at Dallas
       P.O. Box	830688,	MC34
       Richardson, TX 75083, USA

       IPv6 support originally by:
       Mark Huizer, Eindhoven University, The Netherlands
       Jun-ichiro 'itojun' Hagino, KAME	project, Japan
       The Linux PLD project
       Dean Strik, Eindhoven University, The Netherlands

								    POSTFIX(1)

NAME | SYNOPSIS | DESCRIPTION | ENVIRONMENT | CONFIGURATION PARAMETERS | FILES | SEE ALSO | README FILES | LICENSE | AUTHOR(S)

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=postfix&sektion=1&manpath=FreeBSD+11.1-RELEASE+and+Ports>

home | help