Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PNFS(4)			 BSD Kernel Interfaces Manual		       PNFS(4)

NAME
     pNFS -- NFS Version 4.1 Parallel NFS Protocol

DESCRIPTION
     The NFSv4.1 client	and server provides support for	the pNFS specifica-
     tion; see Network File System (NFS) Version 4 Minor Version 1 Protocol
     RFC 5661.	A pNFS service separates Read/Write operations from all	other
     NFSv4.1 operations, which are referred to as Metadata operations.	The
     Read/Write	operations are performed directly on the Data Server (DS)
     where the file's data resides, bypassing the NFS server.  All other file
     operations	are performed on the NFS server, which is referred to as a
     Metadata Server (MDS).  NFS clients that do not support pNFS perform
     Read/Write	operations on the MDS, which acts as a proxy for the appropri-
     ate DS(s).

     The NFSv4.1 protocol provides two pieces of information to	pNFS aware
     clients that allow	them to	perform	Read/Write operations directly on the
     DS.

     The first is DeviceInfo, which is static information defining the DS
     server.  The critical piece of information	in DeviceInfo for the layout
     types supported by	FreeBSD	is the IP address that is used to perform RPCs
     on	the DS.	 It also indicates which version of NFS	the DS supports, I/O
     size and other layout specific information.  In the DeviceInfo, there is
     a DeviceID	which, for the FreeBSD server is unique	to the DS configura-
     tion and changes whenever the nfsd	daemon is restarted or the server is
     rebooted.

     The second	is the layout, which is	per file and references	the DeviceInfo
     to	use via	the DeviceID.  It is for a byte	range of a file	and is either
     Read or Read/Write.  For the FreeBSD server, a layout covers all bytes of
     a file.  A	layout may be recalled by the MDS using	a LayoutRecall call-
     back.  When a client returns a layout via the LayoutReturn	operation it
     can indicate that error(s)	were encountered while doing I/O on the	DS, at
     least for certain layout types such as the	Flexible File Layout.

     The FreeBSD client	and server supports two	layout types.

     The File Layout is	described in RFC5661 and uses the NFSv4.1 protocol to
     perform I/O on the	DS.  It	does not support client	aware DS mirroring
     and, as such, the FreeBSD server only provides File Layout	support	for
     non-mirrored configurations.

     The Flexible File Layout allows the use of	the NFSv3, NFSv4.0 or NFSv4.1
     protocol to perform I/O on	the DS and does	support	client aware mirror-
     ing.  As such, the	FreeBSD	server uses Flexible File Layout layouts for
     the mirrored DS configurations.  The FreeBSD server supports the "tightly
     coupled" variant and all DSs use the NFSv4.1 protocol for I/O operations.
     Clients that support the Flexible File Layout will	do writes and commits
     to	all DS mirrors in the mirror set.

     A FreeBSD pNFS service consists of	a single MDS server plus one or	more
     DS	servers, all of	which are FreeBSD systems.  For	a non-mirrored config-
     uration, the FreeBSD server will issue File Layout	layouts	by default.
     However that default can be set to	the Flexible File Layout by setting
     the sysctl(1) sysctl "vfs.nfsd.default_flexfile" to one.  Mirrored	server
     configurations will only issue Flexible File Layouts.  pNFS clients mount
     the MDS as	they would a single NFS	server.

     A FreeBSD pNFS client must	be running the nfscbd(8) daemon	and use	the
     mount options "nfsv4,minorversion=1,pnfs".

     When files	are created, the MDS creates a file tree identical to what a
     single NFS	server creates,	except that all	the regular (VREG) files will
     be	empty.	As such, if you	look at	the exported tree on the MDS directly
     on	the MDS	server (not via	an NFS mount), the files will all be of	size
     zero.  Each of these files	will also have two extended attributes in the
     system attribute name space:

	   pnfsd.dsfile	- This extended	attrbute stores	the information	that the
	       MDS needs to find the data file on a DS(s) for this file.
	   pnfsd.dsattr	- This extended	attribute stores the Size, AccessTime,
	       ModifyTime and Change attributes	for the	file.

     For each regular (VREG) file, the MDS creates a data file on one (or on N
     of	them for the mirrored case, where N is the mirror_level) of the	DS(s)
     where the file's data will	be stored.  The	name of	this file is the file
     handle of the file	on the MDS in hexadecimal at time of file creation.
     The data file will	have the same file ownership, mode and NFSv4 ACL (if
     ACLs are enabled for the file system) as the file on the MDS, so that
     permission	checking can be	done on	the DS.	 This is referred to as
     "tightly coupled" for the Flexible	File Layout.

     For pNFS aware clients, the service generates File	Layout or Flexible
     File Layout layouts and associated	DeviceInfo.  For non-pNFS aware	NFS
     clients, the pNFS service appears just like a normal NFS service.	For
     the non-pNFS aware	client,	the MDS	will perform I/O operations on the ap-
     propriate DS(s), acting as	a proxy	for the	non-pNFS aware client.	This
     is	also true for NFSv3 and	NFSv4.0	mounts,	since these are	always non-
     pNFS aware.

     It	is possible to assign a	DS to an MDS exported file system so that it
     will store	data for files on the MDS exported file	system.	 If a DS is
     not assigned to an	MDS exported file system, it will store	data for files
     on	all exported file systems on the MDS.

     If	mirroring is enabled, the pNFS service will continue to	function when
     DS(s) have	failed,	so long	is there is at least one DS still operational
     that stores data for files	on all of the MDS exported file	systems.  Af-
     ter a disabled mirrored DS	is repaired, it	is possible to recover the DS
     as	a mirror while the pNFS	service	continues to function.

     See pnfsserver(4) for information on how to set up	a FreeBSD pNFS ser-
     vice.

SEE ALSO
     nfsv4(4), pnfsserver(4), exports(5), fstab(5), rc.conf(5),	nfscbd(8),
     nfsd(8), nfsuserd(8), pnfsdscopymr(8), pnfsdsfile(8), pnfsdskill(8)

BUGS
     Linux kernel versions prior to 4.12 only supports NFSv3 DSs in its	client
     and will do all I/O through the MDS.  For Linux 4.12 kernels, support for
     NFSv4.1 DSs was added, but	I have seen Linux client crashes when testing
     this client.  For Linux 4.17-rc2 kernels, I have not seen client crashes
     during testing, but it only supports the "loosely coupled"	variant.  To
     make it work correctly when mounting the FreeBSD server, you must either
     patch the Flexible	File Layout client driver with a patch like:

	   http://people.freebsd.org/~rmacklem/flexfile.patch

     or	set the	sysctl "vfs.nfsd.flexlinuxhack"	to one so that it works	around
     the Linux client driver's limitations.

     Since the MDS cannot be mirrored, it is a single point of failure just as
     a non pNFS	server is.

BSD				August 5, 2018				   BSD

NAME | DESCRIPTION | SEE ALSO | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=pnfs&sektion=4&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help