Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PLOT3ROT(1)			    BRL-CAD			   PLOT3ROT(1)

NAME
       plot3rot	- rotate, translate, or	scale a	UnixPlot file

SYNOPSIS
       plot3rot	[-x# -y# -z#] [-X# -Y# -Z#] [-s#] [-a# -e#] [-g#] [-M] [-m#]
		[-v] [-S#] < unix_plot > unix_plot

DESCRIPTION
       plot3rot	will rotate translate or scale a UnixPlot file (see plot3(5)).
       Any number of the above options can be given. Each operation is
       performed left to right in the order in which they appear on the
       command line, and the operations	are concatenated. It is	important to
       note that rotations are not commutative,	so the order they are
       specified in is important. Typing the command without any arguments
       gives a useful summary.

       The lower case -x# -y# -z# flags	perform	a rotation about the X,	Y, and
       Z axes respectively by the given	number of degrees. A positive value
       indicates a right handed	rotation. Upper	case -X# -Y# -Z# are
       translations along these	axes in	whatever units the plot	file is	in.
       The -s# flag applies a scale factor up (> 1) or down (< 1) to the plot.

       The -a# -e# flags are for azimuth and elevation about the center	point.
       They are	really shorthands for positive Z axis and negative X axis
       rotations respectively, and should be used in the order shown for the
       proper combined effect to occur.	These flags also cause the plot	to
       auto-center based on the	"space"	command	in the plot file, and the new
       "space" command will be shrunk to fit the rotated plot as tightly as
       possible.

       The -M flag causes the plot to auto-center based	on the "space" command
       in the plot file	in much	the same way that the rt(1) ray	tracer does to
       a model bounding	box. I.e. a sphere is fit to this space	and the
       diameter	and center of this sphere are used as the center and width of
       the plot	in all three dimensions. This has the advantage	of keeping the
       entire model in view from any angle, and	is invariant with respect to
       viewing direction. It has the disadvantage that the "space" will	be
       enlarged	on every cascaded pass through plot3rot(1) where the -M	flag
       is used.

       The -S# flag takes a quoted string of 6 floating	point numbers ("min_x
       min_y min_z max_x max_y max_z"),	which are immediately output as	a
       "space" command,	and which override any spaces specified	by "space"
       commands	found in the input file, as well as any	spaces which are
       computed	by translating,	rotating, or scaling from those	input spaces
       as directed by other flags.

       The -v flag signals that	verbose	mode is	requested. When	set, the
       initial transformation matrix is	printed. In addition, every time a
       space command is	encountered in the input file, the old and new
       bounding	RPP is printed.

       The -m# flag takes a quoted string of 16	floating point numbers as its
       parameter. This string is a 4x4 rotation	matrix (see h/vmath.h for
       details). Note that when	using this flag, do not	use -a#, -e#, or -g.

       UnixPlot	is traditionally a first quadrant 2D plotting space with X
       increasing to the right of the plot, and	Y increasing up	the plot. The
       "front" of a solid model	in the BRL-CAD Package is traditionally
       defined by the right handed system of X coming out of the screen	toward
       you, Y increasing to the	right, and Z increasing	up the display
       (elevation above	the XY ground plane). The -g flag is a convenient
       shorthand to transform azimuths and elevations described	in gift
       notation	(as degrees off	the front or -X	view) into the UnixPlot
       coordinate system for display. If used, this option should usually
       appear as the last argument, because it acts by modifying the rotation
       already established. The	-g command has exactly the same	effect as
       giving -z-90 -x-90 in the same place.

EXAMPLES
       The command

	   plot3rot -z30 -x20 <	file.plot3 > file2.plot3

       performs	a 30 degree positive rotation about the	Z axis (counter
       clockwise as viewed from	the top), and then translates by 20 units
       along this rotated axis.	 If the	order of these arguments was reversed
       the effect would	not be the same.

       To view a plot of a model the way one would see it from a ray trace
       command,	you could use:

	   rthide -a35 -e25 -o file.plot3

	   plot3rot -a35 -e25 -g < file.plot3 |	plot3-fb

       The final -g converts the gift style azimuth and	elevations into	the
       conventional UnixPlot (screen) X,Y coordinate system.

SEE ALSO
       plot3-plot3(1), plot3debug(1), plot3-fb(1), libplot3(3),	plot3(5)

AUTHOR
       BRL-CAD Team

COPYRIGHT
       This software is	Copyright (c) 1988-2019	by the United States
       Government as represented by U.S. Army Research Laboratory.

BUG REPORTS
       Reports of bugs or problems should be submitted via electronic mail to
       devs@brlcad.org

BRL-CAD				  11/05/2021			   PLOT3ROT(1)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHOR | COPYRIGHT | BUG REPORTS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=plot3rot&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help