Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PKCS12(1)                           OpenSSL                          PKCS12(1)

N
       pkcs12 - PKCS#12 file utility

S
       ooppeennssssll ppkkccss1122 [--eexxppoorrtt] [--cchhaaiinn] [--iinnkkeeyy ffiilleennaammee] [--cceerrttffiillee ffiillee--
       nnaammee] [--nnaammee nnaammee] [--ccaannaammee nnaammee] [--iinn ffiilleennaammee] [--oouutt ffiilleennaammee]
       [--nnoooouutt] [--nnoommaaccvveerr] [--nnoocceerrttss] [--ccllcceerrttss] [--ccaacceerrttss] [--nnookkeeyyss] [--iinnffoo]
       [--ddeess] [--ddeess33] [--iiddeeaa] [--nnooddeess] [--nnooiitteerr] [--mmaacciitteerr] [--ttwwooppaassss]
       [--ddeesscceerrtt] [--cceerrttppbbee] [--kkeeyyppbbee] [--kkeeyyeexx] [--kkeeyyssiigg] [--ppaasssswwoorrdd aarrgg]
       [--ppaassssiinn aarrgg] [--ppaassssoouutt aarrgg] [--rraanndd file((ss))]

D
       The ppkkccss1122 command allows PKCS#12 files (sometimes referred to as PFX
       files) to be created and parsed. PKCS#12 files are used by several pro-
       grams including Netscape, MSIE and MS Outlook.

C
       There are a lot of options the meaning of some depends of whether a
       PKCS#12 file is being created or parsed. By default a PKCS#12 file is
       parsed a PKCS#12 file can be created by using the --eexxppoorrtt option (see
       below).

P
       --iinn ffiilleennaammee
           This specifies filename of the PKCS#12 file to be parsed. Standard
           input is used by default.

       --oouutt ffiilleennaammee
           The filename to write certificates and private keys to, standard
           output by default.  They are all written in PEM format.

       --ppaassss aarrgg, --ppaassssiinn aarrgg
           the PKCS#12 file (i.e. input file) password source. For more infor-
           mation about the format of aarrgg see the PPAASSSS PPHHRRAASSEE AARRGGUUMMEENNTTSS sec-
           tion in openssl(1).

       --ppaassssoouutt aarrgg
           pass phrase source to encrypt any outputed private keys with. For
           more information about the format of aarrgg see the PPAASSSS PPHHRRAASSEE AARRGGUU--
           MMEENNTTSS section in openssl(1).

       --nnoooouutt
           this option inhibits output of the keys and certificates to the
           output file version of the PKCS#12 file.

       --ccllcceerrttss
           only output client certificates (not CA certificates).

       --ccaacceerrttss
           only output CA certificates (not client certificates).

       --nnoocceerrttss
           no certificates at all will be output.

       --nnookkeeyyss
           no private keys will be output.

       --iinnffoo
           output additional information about the PKCS#12 file structure,
           algorithms used and iteration counts.

       --ddeess
           use DES to encrypt private keys before outputting.

       --ddeess33
           use triple DES to encrypt private keys before outputting, this is
           the default.

       --iiddeeaa
           use IDEA to encrypt private keys before outputting.

       --nnooddeess
           don't encrypt the private keys at all.

       --nnoommaaccvveerr
           don't attempt to verify the integrity MAC before reading the file.

       --ttwwooppaassss
           prompt for separate integrity and encryption passwords: most soft-
           ware always assumes these are the same so this option will render
           such PKCS#12 files unreadable.

F
       --eexxppoorrtt
           This option specifies that a PKCS#12 file will be created rather
           than parsed.

       --oouutt ffiilleennaammee
           This specifies filename to write the PKCS#12 file to. Standard out-
           put is used by default.

       --iinn ffiilleennaammee
           The filename to read certificates and private keys from, standard
           input by default.  They must all be in PEM format. The order
           doesn't matter but one private key and its corresponding certifi-
           cate should be present. If additional certificates are present they
           will also be included in the PKCS#12 file.

       --iinnkkeeyy ffiilleennaammee
           file to read private key from. If not present then a private key
           must be present in the input file.

       --nnaammee ffrriieennddllyynnaammee
           This specifies the "friendly name" for the certificate and private
           key. This name is typically displayed in list boxes by software
           importing the file.

       --cceerrttffiillee ffiilleennaammee
           A filename to read additional certificates from.

       --ccaannaammee ffrriieennddllyynnaammee
           This specifies the "friendly name" for other certificates. This
           option may be used multiple times to specify names for all certifi-
           cates in the order they appear. Netscape ignores friendly names on
           other certificates whereas MSIE displays them.

       --ppaassss aarrgg, --ppaassssoouutt aarrgg
           the PKCS#12 file (i.e. output file) password source. For more
           information about the format of aarrgg see the PPAASSSS PPHHRRAASSEE AARRGGUUMMEENNTTSS
           section in openssl(1).

       --ppaassssiinn ppaasssswwoorrdd
           pass phrase source to decrypt any input private keys with. For more
           information about the format of aarrgg see the PPAASSSS PPHHRRAASSEE AARRGGUUMMEENNTTSS
           section in openssl(1).

       --cchhaaiinn
           if this option is present then an attempt is made to include the
           entire certificate chain of the user certificate. The standard CA
           store is used for this search. If the search fails it is considered
           a fatal error.

       --ddeesscceerrtt
           encrypt the certificate using triple DES, this may render the
           PKCS#12 file unreadable by some "export grade" software. By default
           the private key is encrypted using triple DES and the certificate
           using 40 bit RC2.

       --kkeeyyppbbee aallgg, --cceerrttppbbee aallgg
           these options allow the algorithm used to encrypt the private key
           and certificates to be selected. Although any PKCS#5 v1.5 or
           PKCS#12 algorithms can be selected it is advisable only to use
           PKCS#12 algorithms. See the list in the NNOOTTEESS section for more
           information.

       --kkeeyyeexx||--kkeeyyssiigg
           specifies that the private key is to be used for key exchange or
           just signing.  This option is only interpreted by MSIE and similar
           MS software. Normally "export grade" software will only allow 512
           bit RSA keys to be used for encryption purposes but arbitrary
           length keys for signing. The --kkeeyyssiigg option marks the key for sign-
           ing only. Signing only keys can be used for S/MIME signing, authen-
           ticode (ActiveX control signing)  and SSL client authentication,
           however due to a bug only MSIE 5.0 and later support the use of
           signing only keys for SSL client authentication.

       --nnoommaacciitteerr, --nnooiitteerr
           these options affect the iteration counts on the MAC and key algo-
           rithms.  Unless you wish to produce files compatible with MSIE 4.0
           you should leave these options alone.

           To discourage attacks by using large dictionaries of common pass-
           words the algorithm that derives keys from passwords can have an
           iteration count applied to it: this causes a certain part of the
           algorithm to be repeated and slows it down. The MAC is used to
           check the file integrity but since it will normally have the same
           password as the keys and certificates it could also be attacked.
           By default both MAC and encryption iteration counts are set to
           2048, using these options the MAC and encryption iteration counts
           can be set to 1, since this reduces the file security you should
           not use these options unless you really have to. Most software sup-
           ports both MAC and key iteration counts.  MSIE 4.0 doesn't support
           MAC iteration counts so it needs the --nnoommaacciitteerr option.

       --mmaacciitteerr
           This option is included for compatibility with previous versions,
           it used to be needed to use MAC iterations counts but they are now
           used by default.

       --rraanndd file((ss))
           a file or files containing random data used to seed the random num-
           ber generator, or an EGD socket (see RAND_egd(3)).  Multiple files
           can be specified separated by a OS-dependent character.  The sepa-
           rator is ;; for MS-Windows, ,, for OpenVMS, and :: for all others.

N
       Although there are a large number of options most of them are very
       rarely used. For PKCS#12 file parsing only --iinn and --oouutt need to be used
       for PKCS#12 file creation --eexxppoorrtt and --nnaammee are also used.

       If none of the --ccllcceerrttss, --ccaacceerrttss or --nnoocceerrttss options are present then
       all certificates will be output in the order they appear in the input
       PKCS#12 files. There is no guarantee that the first certificate present
       is the one corresponding to the private key. Certain software which
       requires a private key and certificate and assumes the first certifi-
       cate in the file is the one corresponding to the private key: this may
       not always be the case. Using the --ccllcceerrttss option will solve this prob-
       lem by only outputting the certificate corresponding to the private
       key. If the CA certificates are required then they can be output to a
       separate file using the --nnookkeeyyss --ccaacceerrttss options to just output CA cer-
       tificates.

       The --kkeeyyppbbee and --cceerrttppbbee algorithms allow the precise encryption algo-
       rithms for private keys and certificates to be specified. Normally the
       defaults are fine but occasionally software can't handle triple DES
       encrypted private keys, then the option --kkeeyyppbbee PPBBEE--SSHHAA11--RRCC22--4400 can be
       used to reduce the private key encryption to 40 bit RC2. A complete
       description of all algorithms is contained in the ppkkccss88 manual page.

E
       Parse a PKCS#12 file and output it to a file:

        openssl pkcs12 -in file.p12 -out file.pem

       Output only client certificates to a file:

        openssl pkcs12 -in file.p12 -clcerts -out file.pem

       Don't encrypt the private key:

        openssl pkcs12 -in file.p12 -out file.pem -nodes

       Print some info about a PKCS#12 file:

        openssl pkcs12 -in file.p12 -info -noout

       Create a PKCS#12 file:

        openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate"

       Include some extra certificates:

        openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" \
         -certfile othercerts.pem

B
       Some would argue that the PKCS#12 standard is one big bug :-)

       Versions of OpenSSL before 0.9.6a had a bug in the PKCS#12 key genera-
       tion routines. Under rare circumstances this could produce a PKCS#12
       file encrypted with an invalid key. As a result some PKCS#12 files
       which triggered this bug from other implementations (MSIE or Netscape)
       could not be decrypted by OpenSSL and similarly OpenSSL could produce
       PKCS#12 files which could not be decrypted by other implementations.
       The chances of producing such a file are relatively small: less than 1
       in 256.

       A side effect of fixing this bug is that any old invalidly encrypted
       PKCS#12 files cannot no longer be parsed by the fixed version. Under
       such circumstances the ppkkccss1122 utility will report that the MAC is OK
       but fail with a decryption error when extracting private keys.

       This problem can be resolved by extracting the private keys and cer-
       tificates from the PKCS#12 file using an older version of OpenSSL and
       recreating the PKCS#12 file from the keys and certificates using a
       newer version of OpenSSL. For example:

        old-openssl -in bad.p12 -out keycerts.pem
        openssl -in keycerts.pem -export -name "My PKCS#12 file" -out fixed.p12

S
       pkcs8(1)

3rd Berkeley Distribution           0.9.7a                           PKCS12(1)

N | S | D | C | P | F | N | E | B | S

Want to link to this manual page? Use this URL:
<
https://www.freebsd.org/cgi/man.cgi?query=pkcs12&sektion=1&manpath=FreeBSD+4.11-RELEASE>

home | help