Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
POLICY ENGINE(7)	    Pacemaker Configuration	      POLICY ENGINE(7)

NAME
       pengine - Policy	Engine Options

SYNOPSIS
       [no-quorum-policy=enum] [symmetric-cluster=boolean]
       [default-resource-stickiness=integer] [is-managed-default=boolean]
       [maintenance-mode=boolean] [start-failure-is-fatal=boolean]
       [enable-startup-probes=boolean] [stonith-enabled=boolean]
       [stonith-action=enum] [stonith-timeout=time] [have-watchdog=boolean]
       [concurrent-fencing=boolean] [startup-fencing=boolean]
       [cluster-delay=time] [batch-limit=integer] [migration-limit=integer]
       [default-action-timeout=time] [stop-all-resources=boolean]
       [stop-orphan-resources=boolean] [stop-orphan-actions=boolean]
       [remove-after-stop=boolean] [pe-error-series-max=integer]
       [pe-warn-series-max=integer] [pe-input-series-max=integer]
       [node-health-strategy=enum] [node-health-base=integer]
       [node-health-green=integer] [node-health-yellow=integer]
       [node-health-red=integer] [placement-strategy=enum]

DESCRIPTION
       This is a fake resource that details the	options	that can be configured
       for the Policy Engine.

SUPPORTED PARAMETERS
       no-quorum-policy	= enum [stop]
	   What	to do when the cluster does not	have quorum

	   What	to do when the cluster does not	have quorum Allowed values:
	   stop, freeze, ignore, suicide

       symmetric-cluster = boolean [true]
	   All resources can run anywhere by default

       default-resource-stickiness = integer [(null)]
	   Deprecated (use resource-stickiness in rsc_defaults instead)

       is-managed-default = boolean [(null)]
	   Deprecated (use is-managed in rsc_defaults instead)

       maintenance-mode	= boolean [false]
	   Should the cluster monitor resources	and start/stop them as
	   required

       start-failure-is-fatal =	boolean	[true]
	   Always treat	start failures as fatal

	   When	set to TRUE, the cluster will immediately ban a	resource from
	   a node if it	fails to start there. When FALSE, the cluster will
	   instead check the resource's	fail count against its
	   migration-threshold.

       enable-startup-probes = boolean [true]
	   Should the cluster check for	active resources during	startup

       stonith-enabled = boolean [true]
	   Failed nodes	are STONITH'd

       stonith-action =	enum [reboot]
	   Action to send to STONITH device ('poweroff'	is a deprecated	alias
	   for 'off')

	   Action to send to STONITH device ('poweroff'	is a deprecated	alias
	   for 'off') Allowed values: reboot, off, poweroff

       stonith-timeout = time [60s]
	   How long to wait for	the STONITH action (reboot,on,off) to complete

       have-watchdog = boolean [false]
	   Enable watchdog integration

	   Set automatically by	the cluster if SBD is detected.	User
	   configured values are ignored.

       concurrent-fencing = boolean [false]
	   Allow performing fencing operations in parallel

       startup-fencing = boolean [true]
	   STONITH unseen nodes

	   Advanced Use	Only! Not using	the default is very unsafe!

       cluster-delay = time [60s]
	   Round trip delay over the network (excluding	action execution)

	   The "correct" value will depend on the speed	and load of your
	   network and cluster nodes.

       batch-limit = integer [0]
	   The number of jobs that the TE is allowed to	execute	in parallel

	   The "correct" value will depend on the speed	and load of your
	   network and cluster nodes.

       migration-limit = integer [-1]
	   The number of migration jobs	that the TE is allowed to execute in
	   parallel on a node

       default-action-timeout =	time [(null)]
	   Deprecated (use 'timeout' in	op_defaults instead)

       stop-all-resources = boolean [false]
	   Should the cluster stop all active resources	(except	those needed
	   for fencing)

       stop-orphan-resources = boolean [true]
	   Should deleted resources be stopped

       stop-orphan-actions = boolean [true]
	   Should deleted actions be cancelled

       remove-after-stop = boolean [false]
	   Remove resources from the LRM after they are	stopped

	   Always set this to false. Other values are, at best,	poorly tested
	   and potentially dangerous.

       pe-error-series-max = integer [-1]
	   The number of PE inputs resulting in	ERRORs to save

	   Zero	to disable, -1 to store	unlimited.

       pe-warn-series-max = integer [5000]
	   The number of PE inputs resulting in	WARNINGs to save

	   Zero	to disable, -1 to store	unlimited.

       pe-input-series-max = integer [4000]
	   The number of other PE inputs to save

	   Zero	to disable, -1 to store	unlimited.

       node-health-strategy = enum [none]
	   The strategy	combining node attributes to determine overall node
	   health.

	   Requires external entities to create	node attributes	(named with
	   the prefix '#health') with values: 'red', 'yellow' or 'green'.
	   Allowed values: none, migrate-on-red, only-green, progressive,
	   custom

       node-health-base	= integer [0]
	   The base score assigned to a	node

	   Only	used when node-health-strategy is set to progressive.

       node-health-green = integer [0]
	   The score 'green' translates	to in rsc_location constraints

	   Only	used when node-health-strategy is set to custom	or
	   progressive.

       node-health-yellow = integer [0]
	   The score 'yellow' translates to in rsc_location constraints

	   Only	used when node-health-strategy is set to custom	or
	   progressive.

       node-health-red = integer [-INFINITY]
	   The score 'red' translates to in rsc_location constraints

	   Only	used when node-health-strategy is set to custom	or
	   progressive.

       placement-strategy = enum [default]
	   The strategy	to determine resource placement

	   The strategy	to determine resource placement	Allowed	values:
	   default, utilization, minimal, balanced

AUTHOR
       Andrew Beekhof <andrew@beekhof.net>
	   Author.

Pacemaker Configuration		  08/29/2020		      POLICY ENGINE(7)

NAME | SYNOPSIS | DESCRIPTION | SUPPORTED PARAMETERS | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=pengine&sektion=7&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help