Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
Pamflip	User Manual(0)					Pamflip	User Manual(0)

NAME
       pamflip - flip or rotate	a PAM or PNM image

SYNOPSIS
       pamflip { -leftright | -lr | -topbottom | -tb | -transpose | -xy	| -ro-
       tate90 |	-r90 | -cw | -rotate270	| -r270	| -ccw |  -rotate180  |	 -r180
       -null   |   -xform=xform1,xform2...    }	 [-memsize=mebibytes]  [-page-
       size=bytes] [pamfile]

       All options can be abbreviated to their shortest	 unique	 prefix.   You
       may use two hyphens instead of one to designate an option.  You may use
       either white space or an	equals sign between an	option	name  and  its
       value.

DESCRIPTION
       This program is part of Netpbm(1).

       pamflip	flips  a PAM or	PNM image top for bottom or left for right, or
       transposes it horizontal	for vertical, or rotates it 1, 2, or 3 quarter
       turns.

       To rotate at other angles, use pnmrotate.  It is	much slower, though.

       The  input image	is pamfile, or Standard	Input if pamfile is not	speci-
       fied.

       To flip/rotate a	JFIF (JPEG) image losslessly, use jpegtran.   jpegtran
       is  part	 of  the Independent Jpeg Group's compression library package,
       not part	of Netpbm.  The	normal Netpbm way to flip a JFIF file would be
       to convert it to	PNM, use pamflip, and convert back to JFIF.  But since
       JPEG compression	is lossy, the resulting	image would have less  quality
       than the	original.  jpegtran, on	the other hand,	can do this particular
       transformation directly on the compressed data without loss.

OPTIONS
       You must	supply exactly one of the following options:

       pamflip's predecessor (before Netpbm 10.7 - August  2002)  pnmflip  did
       not  have the -xform option and instead allowed you to specify any num-
       ber of the other	options, including zero.  It applied all the indicated
       transformations,	 in  the  order	given, just like with pamflip's	-xform
       option.	(Reason	for the	change:	this kind of interpretation of options
       is inconsistent with the	rest of	Netpbm and most	of the Unix world, and
       thus hard to understand and to implement).

       -leftright

       -lr    Flip left	for right.

       -topbottom

       -tb    Flip top for bottom.

       -transpose

       -xy    Transpose	horizontal for vertical.  I.e. make the	pixel at (x,y)
	      be at (y,x).

       -rotate90

       -r90

       -ccw   Rotate counterclockwise 90 degrees.

       -rotate180

       -r180  Rotate 180 degrees.

       -rotate270

       -r270

       -cw    Rotate counterclockwise 270 degrees (clockwise 90	degrees)

       -null  No  change.   (The  purpose of this option is the	convenience of
	      programs that invoke pamflip after computing the kind of	trans-
	      formation	desired, including none	at all).

	      This option was new in Netpbm 10.13 (December 2002).

       -xform=xform1,xform2...
	      Apply all	the transforms listed, in order.  The valid values for
	      the transforms are as follows and	have the same meanings as  the
	      identically named	options	above.

       o      leftright

       o      topbottom

       o      transpose

	      This option was new in Netpbm 10.13 (December 2002).

       The  following options help pamflip use memory efficiently.  Some flip-
       ping operations on very large images can	cause pamflip to have  a  very
       large  working  set,  which means if you	don't have enough real memory,
       the program can page thrash, which means	it takes a  ridiculous	amount
       time  to	run.  If your entire image fits	in real	memory,	you don't have
       a problem.  If you're just flipping top for bottom or left  for	right,
       you  don't have a problem.  Otherwise, pay attention.  If you're	inter-
       ested in	the details of the  thrashing  problem	and  how  pamflip  ap-
       proaches	 it, you're invited to read a complete explanation in comments
       in the source code.

       -memsize=mebibytes
	      mebibytes	is the size in mebibytes  (aka	megabytes)  of	memory
	      available	 for  pamflip.	It is the lesser of the	amount of real
	      or virtual memory	available.

	      pamflip does nothing special to allocate real memory or  control
	      it's  allocation -- it gets whatever it gets just	by referencing
	      virtual memory normally.	The real memory	figure in question  is
	      the  maximum  amount that	pamflip	can be expected	to end up with
	      by doing that.  This is just about impossible for	you  to	 know,
	      of  course, but you can estimate.	 The total real	memory in your
	      system should be a major factor in your estimate.

	      If pamflip cannot	fit the	entire image in	the amount  of	memory
	      you  specify, it does the	transformation in chunks, using	tempo-
	      rary files for intermediate results.

	      In strict	horizontal transformations (left  for  right)  or  the
	      null  transformation,  pamflip  never keeps more than one	row in
	      memory, so the memory size is irrelevant and pamflip doesn't use
	      temporary	files.

	      In  strict  vertical transformations (top	for bottom), even when
	      you allow	pamflip	enough memory to keep the entire image in vir-
	      tual  memory,  it	 accesses  it in a single pass,	which does not
	      cause any	thrashing; the chunks in temporary  files  thus	 don't
	      help.

	      The  real	 memory	is important when you do a column for row type
	      of transformation	(e.g. -rotate90).  In that case, even if  pam-
	      flip  can	 fit the entire	image in virtual memory	at once, if it
	      does not also fit	in real	memory,	the program will  thrash  like
	      crazy because of the order in which pamflip accesses the pixels,
	      and that means it	will take a ridiculously long time to run.   A
	      proper -memsize drastically reduces the paging.

	      If  you  specify	-memsize too large, pamflip may	attempt	to get
	      more virtual memory than the system allows it and	fail.	If  it
	      can  get	the  virtual  memory,  but -memsize is larger than the
	      amount of	real memory the	system allows it and  the  transforma-
	      tion is row for column, it will page thrash and run very slowly.
	      A	value even slightly too	high is	the same as infinity.

	      If you specify -memsize too small, the program will run slightly
	      more  slowly because of extra overhead in	manipulating temporary
	      files.  Also, if your environment	isn't set up to	make temporary
	      files possible, pamflip will fail.

	      Doing the	entire transformation "in memory" doesn't speed	things
	      up as much as you	might think, because even with	the  temporary
	      files, the data is just as likely	to be in memory.  Virtual mem-
	      ory gets paged to	disk and disk files get	cached in memory.   In
	      fact, the	pixels fit much	more compactly into memory when	stored
	      in a temporary file than when stored "in memory" because pamflip
	      uses  a  more  efficient	format.	 So you're likely to have less
	      disk I/O when you	allow pamflip less memory.

	      If you do	not specify -memsize, pamflip assumes infinity.

	      This option did not exist	before Netpbm 10.7 (August 2002).

	      Before Netpbm 10.42 (March 2008),	this option  applied  only  to
	      real memory.  pamflip would always keep the entire image in vir-
	      tual memory and if it could not get enough  virtual  memory,  it
	      failed.	pamflip	 accessed  the	pixels in an order designed to
	      keep real	memory use within the specified	amount.

       -pagesize=bytes
	      bytes is the size	in bytes of a paging unit  --  the  amount  of
	      memory  that  gets  paged	in or out as an	indivisible unit -- in
	      your system.  The	default	is 4KiB.

	      This option has no effect.

	      Before Netpbm 10.42 (March 2008),	pamflip	used it	to control its
	      use of real memory.

	      This option did not exist	before Netpbm 10.7 (August 2002).

	      Miscellaneous options:

       -verbose
	      This  option  causes pamflip to issue messages to	Standard Error
	      about its	progress.

SEE ALSO
       pnmrotate(1), pnm(5), pam(5), jpegtran manual

HISTORY
       pamflip replaced	pnmflip	in Netpbm 10.13	(December 2002).   pamflip  is
       backward	compatible, but	also works on PAM images.

AUTHOR
       Copyright (C) 1989 by Jef Poskanzer.

DOCUMENT SOURCE
       This  manual  page was generated	by the Netpbm tool 'makeman' from HTML
       source.	The master documentation is at

	      http://netpbm.sourceforge.net/doc/pamflip.html

netpbm documentation		20 January 2008		Pamflip	User Manual(0)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | HISTORY | AUTHOR | DOCUMENT SOURCE

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=pamflip&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help