Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
vmixctl(7)			  OSS Devices			    vmixctl(7)

NAME
       oss_digi96 - RME	Digi96 professional audio driver.

DESCRIPTION
       Audio  driver  for  the	RME  Digi96 family of profressional audio con-
       trollers.

       o  Only 16 and 24/32 bit	audio formats are supported.

       o  All Digi96 family members  support  32kHz,  44.1kHz,	48kHz,	64kHz,
	  88.2kHz and 96kHz. sampling rates.

MIXER PANEL
       Note!  For  recording  you  need	to set digi96.sync to INTERNAL and the
       values of digi96.mode and digi96.input to match your studio setup. Oth-
       erwise recordings will fail with	I/O error.

       There are several settings that can be changed using the	ossmix program
       shipped with OSS. Note that some	features don't work  with  all	Digi96
       family  members.	 For  example  ADAT  mode is not supported by the base
       model.

       o  digi96.mode <SPDIF|AESEBU|ADAT>: This	setting	 controls  the	output
	  mode which can be S/PDIF (consumer), AES/EBU (professional) or ADAT.
	  The input mode is detected automatically.  If	ADAT input is detected
	  the output mode will be switched to ADAT automatically (this doesn't
	  work in the other direction).

       o  digi96.sync <EXTERNAL|INTERNAL>: This	setting	tells if the  playback
	  sampling rate	is based on the	internal oscillator or the sample rate
	  detected  in	the  input  port.  See	also  the  definition  of  the
	  digi96.worldclk setting.

       o  digi96.input	<OPTICAL|COAXIAL|INTERNAL|XLR>:	Selects	the active in-
	  put.

       o  digi96.sel <BYPASS|NORMAL>: When set to BYPASS the input signal will
	  be  routed  directly	to the output (also sets digi96.sync automati-
	  cally	to EXTERNAL). In this mode audio data written to /dev/dsp will
	  be muted.

       o  digi96.worldclk  ON|OFF:  Setting this control to ON will enable the
	  optional worldclock input as the sample rate source  (overrides  the
	  digi96.sync setting).

       o  digi96.emph  ON|OFF:	Enables/disables the de-emphasis option	on the
	  analog (monitor) output connector.

       o  digi96.data <AUDIO|AC3>: Specifies if	the output signal is audio  or
	  AC3 data (sets the non-audio bit in the channel status data).

OPTIONS
       None

FILES
       /usr/local/lib/oss/conf/oss_digi96.conf Device configuration file

AUTHOR
       4Front Technologies

				30 August 2020			    vmixctl(7)

NAME | DESCRIPTION | MIXER PANEL | OPTIONS | FILES | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=oss_digi96&sektion=7&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help