Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
oscam.user(5)		      File Formats Manual		 oscam.user(5)

       oscam.user - user configuration file for	OSCam

       The  user  configuration	file for OSCam contains	user definitions. [ac-
       count] sections in oscam.user are recurring (more than one account).

   The [account] section
       user = name
	  account name,	required

       pwd = password
	  password for account,	required

       description = text
	  description of user account

       disabled	= 0|1
	  1 = account disabled,	default:0

       hostname	= hostname
	  host from which user connection is allowed

       expdate = <year>-<month>-<day>|<year>/<month>/<day>
	  expiration date for account, default:none

	   example: expdate = 2001-11-21
		    expdate = 2002/12/22

       allowedprotocols	 =   [camd33][,][camd35][,][cs357x][,][cs378x][,][new-
	  list	of  all	 allowed  connection protocols,	default:all connection

       allowedtimeframe	    =	   DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]
		 where	DAY=SUN,MON,TUE,WED,THU,FRI,SAT	or ALL (for all	possi-
		 ble days)

	  account enabled from hh:mm to	hh:mm for the  specified  day(s),  de-

	  comma	 (,)  to separate times	and semicolon(;	) to separate the dif-
	  ferent days.	You can	use ALL@ if you	want the same time frames  for



	  If   you   use:   DAY@22:00-05:00   this   will   be	 turned	  into

	  ALL@	is  always checked and used, so	you can	watch TV the whole day
	  on FRIday in this exemple. There is no problem to overlap ALL@ in  a
	  day definition, like for SAT@	definition.

       max_connections = count
	  maximum  allowed  connections	per user when unique level will	be ad-
	  ducted, default:1

       uniq = 0|1|2|4
	  unique level:

	   0 = disabled	(default)
	   1 = only one	connection per user is allowed
	   2 = set user	to fake	if source ip is	different
	       (e.g. for newcamd clients with different	CAIDs and ports)
	   3 = only one	connection per user, but only the last login
	       will survive (old MpCS behavior)
	   4 = set user	only to	fake if	source ip is different,
	       but only	the last login will survive

       numusers	= quantity
	  anti-cascading: user per account, 0 =	anti-cascading disabled, -1  =
	  global value from oscam.conf,	default:-1

       penalty = 0|1|2
	  level	of penalty:

	   -1 =	level of oscam.conf (default)
	    0 =	only logging
	    1 =	send fake CWs
	    2 =	temporary user ban
	    3 =	send delayed CWs

       fakedelay = 0|1|milli-seconds
	  set fake delay time individually for user:

	    0 =	disable	fake delay
	   -1 =	fake delay of oscam.conf (default)

       acosc_max_ecms_per_minute = count
	  maximum ecms per minute, 0 = unlimited, -1 = use global setting, de-

       acosc_max_active_sids = count
	  maximum active SIDs with anti-cascading over SID, 0 =	unlimited,  -1
	  = use	global setting,	default:0

       acosc_zap_limit = count
	  zap  limit  for  anti-cascading  over	 SID,  0 = unlimited, -1 = use
	  global setting, default:0

       acosc_penalty = 0|1|2|3|4|-1
	  level	of penalty with	anti-cascading over SID	count:

	    0 =	only logging (default)
	    1 =	send fake CWs
	    2 =	temporary user ban
	    3 =	send delayed CWs
	    4 =	temporary hidecards to the client
	   -1 =	use global setting

       acosc_penalty_duration =	seconds
	  penalty duration for anti-cascading over SID count, -1 = use	global
	  setting, default:0

       acosc_delay = milli-seconds
	  delay	 for  anti-cascading  over SID count, -1 = use global setting,

       failban = 0|2|4|8
	  mask for IP address based blocking:

	   0 = ignore (default)
	   2 = block IP	address	of a disabled account on connecting
	   4 = block IP	address	of a sleeping account while sleeping comes up
	   8 = block duplicate IP address

       lb_nbest_readers	= counts
	  set count of best readers  for  load	balancing,  -1	=  use	global
	  lb_nbest_readers, default:-1

       lb_nfb_readers =	counts
	  set  count  of  fallback readers for load balancing, -1 = use	global
	  lb_nfb_readers, default:1

       lb_nbest_percaid	= CAID1:count1[,CAID2:count2]...
	  set count of best readers per	CAIDs  for  load  balancing,  wildcard
	  CAIDs	with two-digit CAIDs possible, default:none

	   example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1
		    (wildcard CAIDs 03xx and 04xx)

       preferlocalcards	= 0|1
	  SC decoding behavior:.

	   -1 =	global value from oscam.conf (default)
	    0 =	local SCs used like a remote reader
	    1 =	prefer cache exchange based SCs
	    2 =	prefer local SCs

       cwc_disable = 0|1
	  1 = disbale CW cycle check, default:0

       cacheex = 0|1|2|3
	  set cache exchange mode

	   0: disable cache exchange mode (default)
	   1: enable cache exchange pull mode
	   2: enable cache exchange push mode for camd 3.5x / 3.57x and
	      CCcam protocol
	   3: enable reverse cache exchange push mode for camd 3.5x / 3.57x
	      and CCcam	protocol

	  Identical  cache  exchange modes must	be set on local	OSCam user ac-
	  count	and remote OSCam server.

	  Please consider memory consumption.

       cacheex_maxhop =	hops
	  define maximum hops for cache	exchange, default=10

       no_wait_time = 0|1
	  set wait time	behaviour:

	   0: use wait_time set	in oscam.conf (default)
	   1: do not use wait_time set in oscam.conf

       csp_ecm_filter =	[caid][&mask][@provid][$servid],n
	  cache	exchange incoming ECM filter setting (mode 3 only)  for	 Card-
	  servproxy, default:none

       cacheex_drop_csp	= 0|1
	  1  =	drop  incoming Cardservproxy cache (mode 3 only), detection is
	  zero ecmd5, default:0

       cacheex_allow_request = 0|1
	  1 = allow incoming ECM request (mode 3 only),	default:1

       cacheex_allow_filter = 0|1
	  1= allow cache exchange filter (for cache exchange mode 3 only), de-

       cacheex_block_fakecws = 0|1
	  1  = enable fake DCWs	blocking (for cache exchange mode 3 only), get
	  fake DCWs form oscam.fakecws,	default:0

       sleep = minutes
	  time waiting for inactive user, default:none

       sleepsend = 0|255
	  255 =	OSCam client only: stopping requests until  next  zap,	255  =
	  camd	3.x  only: stopping requests until restart of camd 3.x client,

       suppresscmd08 = 0|1
	  0 = tell camd	3.5x, 3.57x and	3.78x clients not to request again for
	  rejected CAID, service ID and	provider ID combination, 1 =  disable,

       keepalive = 0|1
	  0 = disable keepalive	between	server and client for newcamd or CCcam
	  protocol, default:1

       umaxidle	= seconds
	  value	 for  user  being  idle	before disconnect, 0 = idle disconnect
	  disabled, -1 use clientmaxidle in global section, default:-1

       caid   =	  <CAID>[&<mask>][:<target    CAID>][,<CAID>[&<mask>][:<target
	  limit	and mapping of CAIDs, default:all CAIDs	with mask FFFF

	  example: caid	= 0100
		   caid	= 0200&ffee:0300
		   caid	= 0400&ff00:0500,0600
		   caid	= 0702,0722
		   caid	= 0702&ffdf (shortcut for the example above)

       au = label of reader[,label of reader]...|1
	  AU setting, default:none:

	    label of reader = sending EMMs to specified	reader
			      (security	issue: clients can see SC data!)
	    1		    = auto AU is sending EMMs to all readers
			      (security	issue: clients can see SC data!)

       group = 1..64[,1..64]...
	  user assingment to reader groups, default:none, required

       betatunnel   =	<CAID>.<ServiceID>:<target  CAID>[,<CAID>.<ServiceID>:
       <target CAID>]...
	  Define Betacrypt tunneling.  The ServiceID  can  also	 be  used  for
	  wildcarded CAIDs.

	   example: betatunnel = 0100.0001:0200,0300.0004:0500
		    betatunnel = 0600.FFFF:0700

	  Be carefull using abbreviations.

       emmreassembly = 0|1||2
	  EMM  reassembly,  should be set for Viaccess and Cryptoworks readers
	  if the client	that you are using to send EMMs	is  reassembling  them
	  instead of just sending them to OSCam	for processing.

	    0: disabled
	    1: enabled for DVB API
	    2: enabled (default)

       services	= [!]services[,[!]<services>]...
	  user [de]assingment to service group,	default:none

       ident								     =
	  user assingment to SC	specific idents, default:none

       class = [!]class[,[!]class]...
	  user [de]assingment to SC specific classes, default=none

	   example: class = 01,02,!03,!04

       chid = <CAID>:<ChID>[,<CAID>:<ChID>]...
	  user assingment to SC	specific ChIDs,	default:none

       monlevel	= 0|1|2|3|4
	  monitor level:

	   0 = no access to monitor (default)
	   1 = only server and own procs
	   2 = all procs, but viewing only
	   3 = all procs, reload of oscam.user possible
	   4 = complete	access

       cccmaxhops = hops
	  maximum hops limit for CCcam clients,	default:10

	   -1 =	CCcam disabled for this	user
	    0 =	local SCs only
	    1 =	local SCs + 1 hop
	    2 =	local SCs + 2 hops
	   and so on

       cccreshare = level
	  reshare level	for CCcam clients

	   -1 =	use reshare level of oscam.conf	(default)
	    0 =	resharing for direct peer only
	    x =	resharing for direct peer and share level x

       cccignorereshare	= -1|0|1
	  CCcam	ignore reshare setting:

	   -1 =	use ignore reshare level of oscam.conf (default)
	    0 =	use ignore reshare setting of server
	    1 =	use ignore reshare setting of reader or	user

       cccstealth = -1|1
	  CCcam	stealth:

	   -1 =	use CCcam stealth of oscam.conf	(default)
	    0 =	use extended OSCam-CCcam protocol
	    1 =	behaviour like the original CCcam: no activate partner
		detection and extended OSCam-CCcam protocol, prevent
		other OSCam to detect the server as OSCam server

	user	   = username
	pwd	   = password
	group	   = 1
	au	   = myserialmousereader
	services   = myservice
	betatunnel = 0100.0001:0101,0100.0002:0101
	caid	   = 0100
	ident	   = 0100:000000
	uniq	   = 1

       list_smargo(1), oscam(1),, oscam.cacheex(5),	oscam.cert(5),
       oscam.conf(5),  oscam.dvbapi(5),	 oscam.fakecws(5), oscam.guess(5), os-
       cam.ird(5), oscam.provid(5), oscam.ratelimit(5),	 oscam.server(5),  os-,	 oscam.tiers(5),  oscam.srvid(5), oscam.srvid2(5), os-



Want to link to this manual page? Use this URL:

home | help