Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
OPENSC-TOOL(1)			 OpenSC	Tools			OPENSC-TOOL(1)

NAME
       opensc-tool - generic smart card	utility

SYNOPSIS
       opensc-tool [OPTIONS]

DESCRIPTION
       The opensc-tool utility can be used from	the command line to perform
       miscellaneous smart card	operations such	as getting the card ATR	or
       sending arbitrary APDU commands to a card.

OPTIONS
       --version
	   Print the OpenSC package release version.

       --atr, -a
	   Print the Answer To Reset (ATR) of the card.	Output is in hex byte
	   format

       --card-driver driver, -c	driver
	   Use the given card driver. The default is to	auto-detect the
	   correct card	driver.	The literal value ?  lists all available card
	   drivers.

       --list-algorithms,
	   Lists algorithms supported by card

       --info, -i
	   Print information about OpenSC, such	as version and enabled
	   components.

       --list-drivers, -D
	   List	all installed card drivers.

       --list-files, -f
	   Recursively list all	files stored on	card.

       --list-readers, -l
	   List	all configured readers.

       --name, -n
	   Print the name of the inserted card (driver).

       --get-conf-entry	conf, -G conf
	   Get configuration key, format: section:name:key

       --set-conf-entry	conf, -S conf
	   Set configuration key, format: section:name:key:value

       --reader	arg, -r	arg
	   Number of the reader	to use.	By default, the	first reader with a
	   present card	is used. If arg	is an ATR, the reader with a matching
	   card	will be	chosen.

       --reset [type],
	   Resets the card in reader. The default reset	type is	cold, but warm
	   reset is also possible.

       --send-apdu apdu, -s apdu
	   Sends an arbitrary APDU to the card in the format
	   AA:BB:CC:DD:EE:FF....

       --serial
	   Print the card serial number	(normally the ICCSN). Output is	in hex
	   byte	format

       --verbose, -v
	   Causes opensc-tool to be more verbose. Specify this flag several
	   times to enable debug output	in the opensc library.

       --wait, -w
	   Wait	for a card to be inserted.

SEE ALSO
       opensc-explorer(1)

AUTHORS
       opensc-tool was written by Juha YrjA<paragraph>lAx
       <juha.yrjola@iki.fi>.

opensc				  02/28/2021			OPENSC-TOOL(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=opensc-tool&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help