Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
openipmish(1)	       Shell interface to an IPMI system	 openipmish(1)

NAME
       openipmish - Shell interface to an IPMI system

SYNOPSIS
       openipmish [option]

DESCRIPTION
       The  openipmish	is  a command interpreter that gives the full power of
       the OpenIPMI library to a user-level command language.  It is  designed
       so  it  can easily be driven with a scripting language like TCL,	it has
       well-formed output.

       openipmish starts up with no connections	or anything  of	 that  nature.
       You must	enter commands to make connections to domains.

OPTIONS
       --dmsg Turn  on message debugging, this will dump all messages to debug
	      log output.

       --drawmsg
	      Turn on raw message debugging, this will dump all	low-level mes-
	      sages  to	 debug	log output.  This differes from	normal message
	      debugging	in that	all protocol messages  are  also  dumped,  not
	      just IPMI	messages.

       --dmem Turn  on memory debugging, this will cause memory	allocation and
	      deallocations to be checked.  When the  program  terminates,  it
	      will dump	all memory that	was not	properly freed (leaked).

       --dlock
	      Turn  on lock debugging, this will check lock operations to make
	      sure that	locks are help in all the proper places	and make  sure
	      that locks are properly nested.

       --snmp Enable  the SNMP trap handler.  openipmish must be compiled with
	      SNMP code	enabled	for this option	to be available.

       --help Help output

COMMANDS
       openipmish follows the standard command	syntax	defined	 in  ipmi_cmd-
       lang(7).	  See  that for	the details on most commands.  The IPMI	manual
       that comes with OpenIPMI	will also be quite handy.

       openipmish defines some commands	that are not in	the  standard  command
       language.  These	are:

       read   Read and execute commands	from the given file.

       exit   Quit

       redisp_cmd on|off
	      Normally,	 openipmish  redisplays	the command line when an event
	      comes in.	 This is nice for interactive use, but bad for script-
	      ing.  This lets you turn that function on	and off.

SEE ALSO
       ipmi_cmdlang(7),	ipmi_ui(1)

KNOWN PROBLEMS
       None

AUTHOR
       Corey Minyard <cminyard@mvista.com>

OpenIPMI			   05/13/03			 openipmish(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | SEE ALSO | KNOWN PROBLEMS | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=openipmish&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help