Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
NG_UBT(4)              FreeBSD Kernel Interfaces Manual              NG_UBT(4)

NAME
     ng_ubt - Netgraph node type that is also a driver for Bluetooth USB
     devices

SYNOPSIS
     #include <sys/types.h>
     #include <netgraph/bluetooth/include/ng_ubt.h>

DESCRIPTION
     The ubt node type is both a persistent Netgraph node type and a driver
     for Bluetooth USB devices.  It implements a Bluetooth USB transport layer
     as per chapter H2 of the Bluetooth Specification Book v1.1.  A new node
     is created when a supported USB device is plugged in.

     The node has a single hook called hook.  Incoming bytes received on the
     device are re-assembled into HCI frames (according to the length).  Full
     HCI frames are sent out on the hook.  The node will add a HCI frame
     indicator if the device did not send it.  HCI frames received on hook are
     transmitted out.  The node will drop the HCI frame indicator unless the
     device requires it to be present.

HARDWARE
     The ng_ubt driver supports all Bluetooth USB devices that conform with
     the Bluetooth specification v1.1, including:

     +o   3Com 3CREB96
     +o   AIPTEK BR0R02
     +o   EPoX BT-DG02
     +o   Mitsumi Bluetooth USB adapter
     +o   MSI MS-6967
     +o   TDK Bluetooth USB adapter
     +o   Broadcom Bluetooth USB adapter

HOOKS
     This node type supports the following hooks:

     hook      single HCI frame contained in a single mbuf structure.

CONTROL MESSAGES
     This node type supports the generic control messages, plus the following:

     NGM_UBT_NODE_GET_DEBUG (get_debug)
             Returns an integer containing the current debug level for the
             node.

     NGM_UBT_NODE_SET_DEBUG (set_debug)
             This command takes an integer argument and sets the current debug
             level for the node.

     NGM_UBT_NODE_GET_QLEN (get_qlen)
             This command takes a parameter that specifies the queue number
             and returns the current maximal length of the queue for the node.

     NGM_UBT_NODE_SET_QLEN (set_qlen)
             This command takes two parameters that specify the queue number
             and the maximum length of the queue and sets the maximal length
             of the queue for the node.

     NGM_UBT_NODE_GET_STAT (get_stat)
             Returns various statistic information for the node, such as:
             number of bytes (frames) sent, number of bytes (frames) received
             and number of input (output) errors.

     NGM_UBT_NODE_RESET_STAT (reset_stat)
             Reset all statistic counters to zero.

SHUTDOWN
     This node shuts down when the corresponding USB device is un-plugged.

SEE ALSO
     netgraph(4), ugen(4), usb(4), ngctl(8)

HISTORY
     The ubt node type was implemented in FreeBSD 5.0.

AUTHORS
     Maksim Yevmenkin <m_evmenkin@yahoo.com>

BUGS
     Isochronous USB transfers are broken.  This means that the USB device
     will not be able to transfer SCO data (voice).  USB interrupt transfers
     are implemented as bulk-in transfers (not really a bug).

FreeBSD 11.0-PRERELEASE        December 26, 2012       FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | HOOKS | CONTROL MESSAGES | SHUTDOWN | SEE ALSO | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ng_ubt&sektion=4&manpath=FreeBSD+11.0-RELEASE+and+Ports>

home | help