Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
NG_TAG(4)		 BSD Kernel Interfaces Manual		     NG_TAG(4)

NAME
     ng_tag -- mbuf tags manipulating netgraph node type

SYNOPSIS
     #include <netgraph/ng_tag.h>

DESCRIPTION
     The tag node type allows mbuf packet tags (see mbuf_tags(9)) to be	exam-
     ined, stripped or applied to data travelling through a Netgraph network.
     Mbuf tags are used	in many	parts of the FreeBSD kernel network subsystem,
     including the storage of VLAN tags	as described in	vlan(4), Mandatory Ac-
     cess Control (MAC)	labels as described in mac(9), IPsec policy informa-
     tion as described in ipsec(4), and	packet filter tags used	by pf(4).  One
     should also consider useful setting or checking ipfw(8) tags, which are
     implemented as mbuf tags, too.

     Each node allows an arbitrary number of connections to arbitrarily	named
     hooks.  With each hook is associated a tag	which will be searched in the
     list of all tags attached to a packet incoming to this hook, a destina-
     tion hook for matching packets, a destination hook	for non-matching pack-
     ets, a tag	which will be appended to data leaving node through this hook,
     and various statistics counters.

     The list of incoming packet's tags	is traversed to	find a tag with	speci-
     fied type and cookie values.  Upon	match, if specified tag_len is non-
     zero, tag_data of tag is checked to be identical to that specified	in the
     hook structure.  Packets with matched tags	are forwarded to "match" des-
     tination hook, or forwarded to "non-match"	hook otherwise.	 Either	or
     both destination hooks can	be an empty string, or may not exist, in which
     case the packet is	dropped.

     Tag list of packets leaving the node is extended with a new tag specified
     in	outgoing hook structure	(it is possible	to avoid appending a new tag
     to	pass packet completely unchanged by specifying zero type and cookie
     values in the structure of	the corresponding outgoing hook).  Addition-
     ally, a tag can be	stripped from incoming packet after match if strip
     flag is set.  This	can be used for	simple tag removal or tag replacement,
     if	combined with tag addition on outgoing matching	hook.  Note that new
     tag is appended unconditionally, without checking if such a tag is	al-
     ready present in the list (it is up to user to check if this is a con-
     cern).

     New hooks are initially configured	to drop	all incoming packets (as all
     hook names	are empty strings; zero	values can be specified	to forward all
     packets to	non-matching hook), and	to forward all outgoing	packets	with-
     out any tag appending.

     Data payload of packets passing through the node is completely unchanged,
     all operations can	affect tag list	only.

HOOKS
     This node type supports any number	of hooks having	arbitrary names.  In
     order to allow internal optimizations, user should	never try to configure
     a hook with a structure pointing to hooks which do	not exist yet.	The
     safe way is to create all hooks first, then begin to configure them.

CONTROL	MESSAGES
     This node type supports the generic control messages, plus	the following:

     NGM_TAG_SET_HOOKIN
	     This command sets tag values which	will be	searched in the	tag
	     list of incoming packets on a hook.  The following	structure must
	     be	supplied as an argument:

		 struct	ng_tag_hookin {
		   char		   thisHook[NG_HOOKSIZ];     /*	name of	hook */
		   char		   ifMatch[NG_HOOKSIZ];	     /*	match dest hook	*/
		   char		   ifNotMatch[NG_HOOKSIZ];   /*	!match dest hook */
		   uint8_t	   strip;		     /*	strip tag if found */
		   uint32_t	   tag_cookie;		     /*	ABI/Module ID */
		   uint16_t	   tag_id;		     /*	tag ID */
		   uint16_t	   tag_len;		     /*	length of data */
		   uint8_t	   tag_data[0];		     /*	tag data */
		 };

	     The hook to be updated is specified in thisHook.  Data bytes of
	     tag corresponding to specified tag_id (type) and tag_cookie are
	     placed in the tag_data array; there must be tag_len of them.
	     Matching and non-matching incoming	packets	are delivered out the
	     hooks named ifMatch and ifNotMatch, respectively.	If strip flag
	     is	non-zero, then found tag is deleted from list of packet	tags.

     NGM_TAG_GET_HOOKIN
	     This command takes	an ASCII string	argument, the hook name, and
	     returns the corresponding struct ng_tag_hookin as shown above.

     NGM_TAG_SET_HOOKOUT
	     This command sets tags values which will be applied to outgoing
	     packets.  The following structure must be supplied	as an argu-
	     ment:

		 struct	ng_tag_hookout {
		   char		   thisHook[NG_HOOKSIZ];     /*	name of	hook */
		   uint32_t	   tag_cookie;		     /*	ABI/Module ID */
		   uint16_t	   tag_id;		     /*	tag ID */
		   uint16_t	   tag_len;		     /*	length of data */
		   uint8_t	   tag_data[0];		     /*	tag data */
		 };

	     The hook to be updated is specified in thisHook.  Other variables
	     mean basically the	same as	in struct ng_tag_hookin	shown above,
	     except used for setting values in a new tag.

     NGM_TAG_GET_HOOKOUT
	     This command takes	an ASCII string	argument, the hook name, and
	     returns the corresponding struct ng_tag_hookout as	shown above.

     NGM_TAG_GET_STATS
	     This command takes	an ASCII string	argument, the hook name, and
	     returns the statistics associated with the	hook as	a struct
	     ng_tag_hookstat.

     NGM_TAG_CLR_STATS
	     This command takes	an ASCII string	argument, the hook name, and
	     clears the	statistics associated with the hook.

     NGM_TAG_GETCLR_STATS
	     This command is identical to NGM_TAG_GET_STATS, except that the
	     statistics	are also atomically cleared.

     Note: statistics counters as well as three	statistics messages above work
     only if code was compiled with the	NG_TAG_DEBUG option.  The reason for
     this is that statistics is	rarely used in practice, but still consumes
     CPU cycles	for every packet.  Moreover, it	is even	not accurate on	SMP
     systems due to lack of synchronization between threads, as	this is	very
     expensive.

SHUTDOWN
     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or
     when all hooks have been disconnected.

EXAMPLES
     It	is possible to do a simple L7 filtering	by using ipfw(8) tags in con-
     junction with ng_bpf(4) traffic analyzer.	Example	below explains how to
     filter DirectConnect P2P network data traffic, which cannot be done by
     usual means as it uses random ports.  It is known that such data connec-
     tion always contains a TCP	packet with 6-byte payload string "$Send|".
     So	ipfw's netgraph	action will be used to divert all TCP packets to an
     ng_bpf(4) node which will check for the specified string and return non-
     matching packets to ipfw(8).  Matching packets are	passed to ng_tag(4)
     node, which will set a tag	and pass them back to ng_bpf(4)	node on	a hook
     programmed	to accept all packets and pass them back to ipfw(8).  A	script
     provided in ng_bpf(4) manual page will be used for	programming node.
     Note that packets diverted	from ipfw(8) to	Netgraph have no link-level
     header, so	offsets	in tcpdump(1) expressions must be altered accordingly.
     Thus, there will be expression "ether[40:2]=0x244c	&&
     ether[42:4]=0x6f636b20" on	incoming hook and empty	expression to match
     all packets from ng_tag(4).

     So, this is ngctl(8) script for nodes creating and	naming for easier ac-
     cess:

	 /usr/sbin/ngctl -f- <<-SEQ
		 mkpeer	ipfw: bpf 41 ipfw
		 name ipfw:41 dcbpf
		 mkpeer	dcbpf: tag matched th1
		 name dcbpf:matched ngdc
	 SEQ

     Now "ngdc"	node (which is of type ng_tag) must be programmed to echo all
     packets received on the "th1" hook	back, with the ipfw(8) tag 412 at-
     tached.  MTAG_IPFW	value for tag_cookie was taken from file
     <netinet/ip_fw.h> and value for tag_id is tag number (412), with zero tag
     length:

	 ngctl msg ngdc: sethookin { thisHook=\"th1\" ifNotMatch=\"th1\" }
	 ngctl msg ngdc: sethookout { thisHook=\"th1\" \
	   tag_cookie=1148380143 \
	   tag_id=412 }

     Don't forget to program ng_bpf(4) "ipfw" hook with	the above expression
     (see ng_bpf(4) for	script doing this) and "matched" hook with an empty
     expression:

	 ngctl msg dcbpf: setprogram { thisHook=\"matched\" ifMatch=\"ipfw\" \
	   bpf_prog_len=1 bpf_prog=[ { code=6 k=8192 } ] }

     After finishing with netgraph(4) nodes, ipfw(8) rules must	be added to
     enable packet flow:

	 ipfw add 100 netgraph 41 tcp from any to any iplen 46
	 ipfw add 110 reset tcp	from any to any	tagged 412

     Note: one should ensure that packets are returned to ipfw after process-
     ing inside	netgraph(4), by	setting	appropriate sysctl(8) variable:

	 sysctl	net.inet.ip.fw.one_pass=0

SEE ALSO
     netgraph(4), ng_bpf(4), ng_ipfw(4), ipfw(8), ngctl(8), mbuf_tags(9)

HISTORY
     The ng_tag	node type was implemented in FreeBSD 6.2.

AUTHORS
     Vadim Goncharov <vadimnuclight@tpu.ru>

BUGS
     For manipulating any tags with data payload (that is, all tags with non-
     zero tag_len) one should care about non-portable machine-dependent	repre-
     sentation of tags on the low level	as byte	stream.	 Perhaps this should
     be	done by	another	program	rather than manually.

BSD				 June 10, 2006				   BSD

NAME | SYNOPSIS | DESCRIPTION | HOOKS | CONTROL MESSAGES | SHUTDOWN | EXAMPLES | SEE ALSO | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ng_tag&manpath=FreeBSD+8.0-RELEASE>

home | help