Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
NDC(8)			  BSD System Manager's Manual			NDC(8)

NAME
     ndc -- name daemon	control	program

SYNOPSIS
     ndc [-c channel] [-l localsock] [-p pidfile] [-d] [-q] [-s] [-t]
	 [command]

DESCRIPTION
     This command allows the system administrator to control the operation of
     a name server.  If	no command is given, ndc will prompt for commands un-
     til it reads EOF.

     Options are:

     -c	channel	 Specifies the rendezvous point	for the	control	channel.  The
		 default is /var/run/ndc (a UNIX domain	socket which is	also
		 the server's default control channel).	 If the	desired	con-
		 trol channel is a TCP/IP socket, then the format of the
		 channel argument is ipaddr/port (for example, 127.0.0.1/54
		 would be TCP port 54 on the local host.)

     -l	localsock
		 This option will bind(2) the client side of the control chan-
		 nel to	a specific address.  Servers can be configured to re-
		 ject connections which	do not come from specific addresses.
		 The format is the same	as for channel (see above).

     -p	pidfile	 For backward compatibility with older name servers, ndc is
		 able to use UNIX signals for control communications.  This
		 capability is optional	in modern name servers and will	disap-
		 pear altogether at some future	time.  Note that the available
		 command set is	narrower when the signal interface is used.  A
		 likely	pidfile	argument would be something like
		 /var/run/named.pid.

     -d		 Turns on debugging output, which is of	interest mainly	to de-
		 velopers.

     -q		 Suppresses prompts and	result text.

     -s		 Suppresses nonfatal error announcements.

     -t		 Turns on protocol and system tracing, useful in installation
		 debugging.

COMMANDS
     Several commands are built	into ndc, but the full set of commands sup-
     ported by the name	server is dynamic and should be	discovered using the
     help command (see below).	Builtin	commands are:

     /help	 Provides help for builtin commands.

     /exit	 Exit from ndc command interpreter.

     /trace	 Toggle	tracing	(see -t	description above).

     /debug	 Toggle	debugging (see -d description above).

     /quiet	 Toggle	quietude (see -q description above).

     /silent	 Toggle	silence	(see -s	description above).

NOTES
     If	running	in pidfile mode, any arguments to start	and restart commands
     are passed	to the new named on its	command	line.  If running in channel
     mode, there is no start command and the restart command just tells	the
     name server to execvp(3) itself.

AUTHOR
     Paul Vixie	(Internet Software Consortium)

SEE ALSO
     named(8),

4th Berkeley Distribution      December	31, 1998     4th Berkeley Distribution

NAME | SYNOPSIS | DESCRIPTION | COMMANDS | NOTES | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ndc&sektion=8&manpath=FreeBSD+5.2-RELEASE+and+Ports>

home | help