Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ncftpput(1)		    General Commands Manual		   ncftpput(1)

NAME
       ncftpput	- Internet file	transfer program for scripts

SYNOPSIS
       ncftpput	[options] remote-host remote-directory local-files...

       ncftpput	[options] bookmark-name	remote-directory local-files...

       ncftpput	-f login.cfg [options] remote-directory	local-files...

       ncftpput	-c remote-host remote-path-name	< stdin

       ncftpput	-C remote-host local-path-name remote-path-name

OPTIONS
   Command line	flags:
       -u XX   Use username XX instead of anonymous.

       -p XX   Use password XX with the	username.

       -P XX   Use  port  number  XX  instead  of the default FTP service port
	       (21).

       -j XX   Use account XX in supplement to the username and	password (dep-
	       recated).

       -d XX   Use the file XX for debug logging.

       -a      Use ASCII transfer type instead of binary.

       -m      Attempt	to  make the remote destination	directory before copy-
	       ing.

       -t XX   Timeout after XX	seconds.

       -U XX   Use value XX for	the umask.

       -v/-V   Do (do not)  use	 progress  meters.   The  default  is  to  use
	       progress	meters if the output stream is a TTY.

       -f XX   Read the	file XX	for host, user,	and password information.

       -c      Read  locally  from standard input and write remotely to	speci-
	       fied pathname.

       -C      Similar to -c, except a local pathname is specified.

       -A      Append to remote	files, instead of overwriting them.

       -T XX   Upload into temporary files prefixed by XX.

       -S XX   Upload into temporary files suffixed by XX.

       -R      Recursive mode; copy whole directory trees.

       -r XX   Redial a	maximum	of XX times until connected to the remote  FTP
	       server.

       -z/-Z   Do (do not) try to resume transfers.  The default is to not try
	       to resume (-Z).

       -E      Use regular (PORT) data connections.

       -F      Use passive (PASV) data connections.  The  default  is  to  use
	       passive,	 but  to fallback to regular if	the passive connection
	       fails or	times out.

       -DD     Delete local file after successfully uploading it.

       -y      Try using "SITE UTIME" to preserve timestamps on	 remote	 host.
	       Not many	remote FTP servers support this, so it may not work.

       -b      Run  in background (by submitting a batch job and then spawning
	       ncftpbatch).

       -bb     Similar to -b option, but only submits the batch	job.  You will
	       need to run ncftpbatch for the batch job	to be processed.  This
	       is useful if you	already	have a ncftpbatch process running,  or
	       wish to have better control of when batch jobs are processed.

	       For example, if you wanted to do	background processing of three
	       files all on the	same remote server, it is more polite  to  use
	       just  one  ncftpbatch process to	process	the three jobs sequen-
	       tially, rather than  having  three  ncftpbatch  processes  open
	       three simultaneous FTP sessions to the same server.

       -B XX   Try setting the TCP/IP socket buffer size to XX bytes.

       -W XX   Send raw	FTP command XX after logging in.

       -X XX   Send raw	FTP command XX after each file transferred.

       -Y XX   Send raw	FTP command XX before logging out.

	       The  -W,	 -X,  and -Y options are useful	for advanced users who
	       need to tweak behavior on some servers.	For example, users ac-
	       cessing	mainframes  might  need	to send	some special SITE com-
	       mands to	set blocksize and record format	information.

	       For these options, you can use them multiple times each if  you
	       need to send multiple commands.	For the	-X option, you can use
	       the cookie %s to	expand into the	name  of  the  file  that  was
	       transferred.

       -o XX   Set advanced option XX.

	       This option is used primarily for debugging.  It	sets the value
	       of an internal variable to an integer value.  An	example	 usage
	       would  be:  -o useFEAT=0,useCLNT=1 which	in this	case, disables
	       use of the FEAT command and  enables  the  CLNT	command.   The
	       available  variables  include: usePASV, useSIZE,	useMDTM, useR-
	       EST, useNLST_a, useNLST_d, useFEAT, useMLSD, useMLST,  useCLNT,
	       useHELP_SITE, useSITE_UTIME, STATfileParamWorks,	NLSTfileParam-
	       Works, require20, allowProxyForPORT, doNotGetStartCWD.

DESCRIPTION
       The purpose of ncftpput is to do	file transfers from  the  command-line
       without	entering  an  interactive  shell.   This  lets you write shell
       scripts or other	unattended processes that can do FTP.  It is also use-
       ful  for	 advanced  users who want to send files	from the shell command
       line without entering an	interactive FTP	program	such as	ncftp.

       By default the program tries to open the	remote host and	 login	anony-
       mously,	but  you can specify a username	and password information.  The
       -u option is used to specify the	username to login as, and the  -p  op-
       tion  is	 used to specify the password.	If you are running the program
       from the	shell, you may omit the	-p option and the program will	prompt
       you for the password.

       Using  the  -u and -p options are not recommended, because your account
       information is exposed to anyone	who can	see your shell script or  your
       process	information.   For example, someone using the ps program could
       see your	password while the program runs.

       You may use the -f option instead to specify a file  with  the  account
       information.   However, this is still not secure	because	anyone who has
       read access to the information file can see  the	 account  information.
       Nevertheless,  if  you choose to	use the	-f option the file should look
       something like this:

	      host sphygmomanometer.ncftp.com
	      user gleason
	      pass mypassword

       Don't forget to change the permissions on this file so no one else  can
       read them.

       The -d option is	very useful when you are trying	to diagnose why	a file
       transfer	is failing.  It	prints out the entire FTP conversation to  the
       file  you  specify,  so you can get an idea of what went	wrong.	If you
       specify the special name	stdout as the name  of	the  debugging	output
       file, the output	will instead print to the screen.

       Using  ASCII  mode is helpful when the text format of your host differs
       from that of the	remote host.  For example, if you are sending  a  text
       file  from  a UNIX system to a Windows-based host, you could use	the -a
       flag which would	use ASCII transfer mode	so that	the  file  created  on
       the  Windows  machine would be in its native text format	instead	of the
       UNIX text format.

       You can upload an entire	directory tree of files	by using the -R	 flag.
       Example:

	   $ ncftpput -R pikachu.nintendo.co.jp	/incoming /tmp/stuff

       This would create a /incoming/stuff hierarchy on	the remote host.

       The  -T	and  -S	options	are useful when	you want to upload file	to the
       remote host, but	you don't want to use the destination  pathname	 until
       the  file is complete.  Using these options, you	will not destroy a re-
       mote file by the	same name until	your file is finished.	These  options
       are  also  useful when a	remote process on the remote host polls	a spe-
       cific filename, and you don't want that process to see that file	 until
       you know	the file is finished sending.  Here is an example that uploads
       to  the	file  /pub/incoming/README,  using  the	 filename  /pub/incom-
       ing/README.tmp as a temporary filename:

	   $ ncftpput -S .tmp bowser.nintendo.co.jp /pub/incoming /a/README

       A neat way to pipe the output from any local command into a remote file
       is to use the -c	option,	which denotes that you're using	stdin  as  in-
       put.   The following example shows how to make a	backup and store it on
       a remote	machine:

	   $ tar cf - /	| ncftpput -c sonic.sega.co.jp /usr/local/backup.tar

DIAGNOSTICS
       ncftpput	returns	the following exit values:

       0       Success.

       1       Could not connect to remote host.

       2       Could not connect to remote host	- timed	out.

       3       Transfer	failed.

       4       Transfer	failed - timed out.

       5       Directory change	failed.

       6       Directory change	failed - timed out.

       7       Malformed URL.

       8       Usage error.

       9       Error in	login configuration file.

       10      Library initialization failed.

       11      Session initialization failed.

AUTHOR
       Mike Gleason, NcFTP Software (http://www.ncftp.com).

SEE ALSO
       ncftpget(1), ncftp(1), ftp(1), rcp(1), tftp(1).

       LibNcFTP	(http://www.ncftp.com/libncftp/).

ncftpput			NcFTP Software			   ncftpput(1)

NAME | SYNOPSIS | OPTIONS | DESCRIPTION | DIAGNOSTICS | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ncftpput&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help