Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ncftpls(1)		    General Commands Manual		    ncftpls(1)

NAME
       ncftpls - Internet file transfer	program	for scripts

SYNOPSIS
       ncftpls [options] ftp://url.style/host/path/name/

OPTIONS
   Command line	flags:
       -m      Use  a machine readable list format, if the server supports it.
	       This requires that the server software support the MLSD	exten-
	       sions, and many implementations do not have these features.

       -1      Most basic format, one item per line.

       -l      Long list format.

       -C      Columnized list format. This is the default list	format.

       -R      Recurse all subdirectories while	listing.

       -a      Show all	files, if server allows	it (as in "/bin/ls -a").

       -i XX   Filter  the  listing  (if server	supports it) with the wildcard
	       XX.

       -x -XX  Set the ls flags	to use on the server.

       -u XX   Use username XX instead of anonymous.

       -p XX   Use password XX with the	username.

       -P XX   Use port	number XX instead of  the  default  FTP	 service  port
	       (21).

       -d XX   Use the file XX for debug logging.

       -t XX   Timeout after XX	seconds.

       -E      Use regular (PORT) data connections.

       -F      Use  passive  (PASV)  data  connections.	 The default is	to use
	       passive,	but to fallback	to regular if the  passive  connection
	       fails or	times out.

       -r XX   Redial  a maximum of XX times until connected to	the remote FTP
	       server.

       -W XX   Send raw	FTP command XX after logging in.

       -X XX   Send raw	FTP command XX after each file transferred.

       -Y XX   Send raw	FTP command XX before logging out.

	       The -W, -X, and -Y options are useful for  advanced  users  who
	       need to tweak behavior on some servers.	For example, users ac-
	       cessing mainframes might	need to	send some  special  SITE  com-
	       mands to	set blocksize and record format	information.

	       For  these options, you can use them multiple times each	if you
	       need to send multiple commands.	For the	-X option, you can use
	       the  cookie  %s	to  expand  into the name of the file that was
	       transferred.

       -o XX   Set advanced option XX.

	       This option is used primarily for debugging.  It	sets the value
	       of  an internal variable	to an integer value.  An example usage
	       would be: -o useFEAT=0,useCLNT=1	which in this  case,  disables
	       use  of	the  FEAT  command  and	enables	the CLNT command.  The
	       available variables include: usePASV, useSIZE,  useMDTM,	 useR-
	       EST,  useNLST_a,	useNLST_d, useFEAT, useMLSD, useMLST, useCLNT,
	       useHELP_SITE, useSITE_UTIME, STATfileParamWorks,	NLSTfileParam-
	       Works, require20, allowProxyForPORT, doNotGetStartCWD.

DESCRIPTION
       The  purpose  of	 ncftpls  is to	do remote directory listings using the
       File Transfer Protocol without entering	an  interactive	 shell.	  This
       lets  you write shell scripts or	other unattended processes that	can do
       FTP.

       The default behavior is to print	the directory  listing	in  columnized
       format  (i.e. ls	-CF), but that is not very useful for scripting.  This
       example uses the	-1 flag, to print one file per line:

	   $ ncftpls -1	ftp://ftp.ncftp.com/pub/ncftp/

       You can also do a remote	"ls -l", by using "ncftpls -l".	 If  you  want
       to  try	other flags, you have to use them with the -x flag.  For exam-
       ple, if you wanted to do	a remote "ls -lrt", you	could do this:

	   $ ncftpls -x	"-lrt" ftp://ftp.ncftp.com/pub/ncftp/

       By default the program tries to open the	remote host and	 login	anony-
       mously,	but  you  can specify a	username and password information like
       you can with ncftpget or	ncftpput.

       Note that the standard specifies	that URL pathnames  are	 are  relative
       pathnames.   For	 FTP,  this means that URLs specify relative pathnames
       from the	start directory, which for  user  logins,  are	typically  the
       user's home directory.  If you want to use absolute pathnames, you need
       to include a literal slash, using the "%2F" code	for a  "/"  character.
       Examples:

	   $ ncftpls -u	linus ftp://ftp.kernel.org/%2Fusr/src/
	   $ ncftpls ftp://steve@ftp.apple.com/%2Fetc/

DIAGNOSTICS
       ncftpls returns the following exit values:

       0       Success.

       1       Could not connect to remote host.

       2       Could not connect to remote host	- timed	out.

       3       Transfer	failed.

       4       Transfer	failed - timed out.

       5       Directory change	failed.

       6       Directory change	failed - timed out.

       7       Malformed URL.

       8       Usage error.

       9       Error in	login configuration file.

       10      Library initialization failed.

       11      Session initialization failed.

AUTHOR
       Mike Gleason, NcFTP Software (http://www.ncftp.com).

SEE ALSO
       ncftpput(1), ncftpget(1), ncftp(1), ftp(1), rcp(1), tftp(1).

       LibNcFTP	(http://www.ncftp.com/libncftp/).

ncftpls				NcFTP Software			    ncftpls(1)

NAME | SYNOPSIS | OPTIONS | DESCRIPTION | DIAGNOSTICS | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ncftpls&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help