Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MSTCONFIG,(1)			 User Commands			 MSTCONFIG,(1)

NAME
       mstconfig,  -  manual page for mstconfig, mstflint 4.14.0, built	on Mar
       3 2020, 14:01:56. Git SHA Hash: N/A

DESCRIPTION
	      NAME:

	      mstconfig

	      SYNOPSIS:

	      mstconfig	[Options] <Commands> [Parameters]

	      DESCRIPTION:

	      Allows the user to change	 some  of  the	device	configurations
	      without having to	create and burn	a new firmware.

	      OPTIONS:

       -d|--dev	<device>
	      :	Perform	operation for a	specified MST device.

       -b|--db <filename>
	      :	Use a specific database	file.

       -f|--file <conf_file>
	      :	raw configuration file.

       -h|--help
	      :	Display	help message.

       -v|--version
	      :	Display	version	info.

       -e|--enable_verbosity
	      :	Show default and current configurations.

       -y|--yes
	      :	Answer yes in prompt.

       -a|--all_attrs
	      :	Show all attributes in the XML template

       -p|--private_key
	      :	pem file for private key

       -u|--key_uuid
	      :	keypair	uuid

	      COMMANDS:

       clear_semaphore
	      :	clear the tool semaphore.

       i[show_confs]
	      :	display	information about all configurations.

       q[uery]
	      :	query supported	configurations.

       r[eset]
	      :	reset all configurations to their default value.

       s[et]  :	set configurations to a	specific device.

       set_raw
	      :	set raw	configuration file.(only Connect-IB/Connect-X4/LX.)

       backup :	  backup   configurations  to  a  file	(only  Connect-IB/Con-
	      nect-X4/LX.). Use	set_raw	command	to restore file.

       gen_tlvs_file
	      :	Generate List of all TLVs. TLVs	output file name must be spec-
	      ified. (*)

       g[en_xml_template]
	      :	 Generate  XML	template.  TLVs	input file name	and XML	output
	      file name	must be	specified. (*)

       xml2raw
	      :	Generate Raw file from XML file. XML input file	name  and  raw
	      output file name must be specified. (*)

       raw2xml
	      :	 Generate  XML file from Raw file. raw input file name and XML
	      output file name must be specified. (*)

       xml2bin
	      :	Generate Bin file from XML file. XML input file	name  and  bin
	      output file name must be specified. (*)

       create_conf
	      :	Generate Configuration file from XML file. XML input file name
	      and bin output file name must be specified. (*)

       apply  :	Apply a	Configuration file. bin	input file name	must be	speci-
	      fied. (*)

	      (*) These	commands do not	require	MST device

	      To  show supported configurations	by device type,	run show_confs
	      command

	      Examples:

       To query	configurations
	      :	mstconfig -d 04:00.0 query

       To set configuration
	      :	  mstconfig   -d   04:00.0   set   SRIOV_EN=1	 NUM_OF_VFS=16
	      WOL_MAGIC_EN_P1=1

       To set raw configuration
	      :	mstconfig -d 05:00.0 -f	conf_file set_raw

       To reset	configuration
	      :	mstconfig -d 04:00.0 reset

	      Supported	devices:

	      4th  Generation  devices:	ConnectX3, ConnectX3-Pro (FW 2.31.5000
	      and above).  5th Generation devices: ConnectIB, ConnectX4,  Con-
	      nectX4-LX, ConnectX5.

	      Note: query device to view supported configurations by Firmware.

SEE ALSO
       The  full  documentation	for mstconfig, is maintained as	a Texinfo man-
       ual.  If	the info and mstconfig,	programs  are  properly	 installed  at
       your site, the command

	      info mstconfig,

       should give you access to the complete manual.

mstconfig, mstflint 4.14.0, built Marchr20202020, 14:01:56. Git	SMSTCONFIG,(1)

NAME | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mstconfig&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help