Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ms_transform(3)		   Erlang Module Definition	       ms_transform(3)

NAME
       ms_transform  -	A parse	transformation that translates fun syntax into
       match
	   specifications.

DESCRIPTION
       This module provides the	parse transformation that makes	calls  to  ets
       and  dbg:fun2ms/1  translate into literal match specifications. It also
       provides	the back end for the same functions when called	from  the  Er-
       lang shell.

       The  translation	 from funs to match specifications is accessed through
       the two "pseudo functions" ets:fun2ms/1 and dbg:fun2ms/1.

       As everyone trying to use ets:select/2 or dbg seems to end  up  reading
       this manual page, this description is an	introduction to	the concept of
       match specifications.

       Read the	whole manual page if it	is the first time you  are  using  the
       transformations.

       Match  specifications  are  used	more or	less as	filters. They resemble
       usual Erlang matching in	a list comprehension or	in  a  fun  used  with
       lists:foldl/3,  and so on. However, the syntax of pure match specifica-
       tions is	awkward, as they are made up purely by Erlang terms,  and  the
       language	has no syntax to make the match	specifications more readable.

       As  the	execution  and	structure of the match specifications are like
       that of a fun, it is more straightforward to write it using the	famil-
       iar  fun	 syntax	and to have that translated into a match specification
       automatically. A	real fun is clearly more powerful than the match spec-
       ifications  allow,  but	bearing	 the match specifications in mind, and
       what they can do, it is still more convenient to	write it all as	a fun.
       This module contains the	code that translates the fun syntax into match
       specification terms.

EXAMPLE	1
       Using ets:select/2 and a	match specification, one can filter  out  rows
       of  a table and construct a list	of tuples containing relevant parts of
       the data	in these rows.	One  can  use  ets:foldl/3  instead,  but  the
       ets:select/2  call  is far more efficient. Without the translation pro-
       vided by	ms_transform, one must struggle	with writing match  specifica-
       tions terms to accommodate this.

       Consider	a simple table of employees:

       -record(emp, {empno,	%Employee number as a string, the key
		     surname,	%Surname of the	employee
		     givenname,	%Given name of employee
		     dept,	%Department, one of {dev,sales,prod,adm}
		     empyear}).	%Year the employee was employed

       We create the table using:

       ets:new(emp_tab,	[{keypos,#emp.empno},named_table,ordered_set]).

       We fill the table with randomly chosen data:

       [{emp,"011103","Black","Alfred",sales,2000},
	{emp,"041231","Doe","John",prod,2001},
	{emp,"052341","Smith","John",dev,1997},
	{emp,"076324","Smith","Ella",sales,1995},
	{emp,"122334","Weston","Anna",prod,2002},
	{emp,"535216","Chalker","Samuel",adm,1998},
	{emp,"789789","Harrysson","Joe",adm,1996},
	{emp,"963721","Scott","Juliana",dev,2003},
	{emp,"989891","Brown","Gabriel",prod,1999}]

       Assuming	that we	want the employee numbers of everyone in the sales de-
       partment, there are several ways.

       ets:match/2 can be used:

       1> ets:match(emp_tab, {'_', '$1', '_', '_', sales, '_'}).
       [["011103"],["076324"]]

       ets:match/2 uses	a simpler type of match	specification, but it is still
       unreadable,  and	one has	little control over the	returned result. It is
       always a	list of	lists.

       ets:foldl/3 or ets:foldr/3 can be used to avoid the nested lists:

       ets:foldr(fun(#emp{empno	= E, dept = sales},Acc)	-> [E |	Acc];
		    (_,Acc) -> Acc
		 end,
		 [],
		 emp_tab).

       The result is ["011103","076324"]. The fun is straightforward,  so  the
       only  problem  is  that all the data from the table must	be transferred
       from the	table to the calling process for filtering.  That  is  ineffi-
       cient  compared to the ets:match/2 call where the filtering can be done
       "inside"	the emulator  and  only	 the  result  is  transferred  to  the
       process.

       Consider	a "pure" ets:select/2 call that	does what ets:foldr does:

       ets:select(emp_tab, [{#emp{empno	= '$1',	dept = sales, _='_'},[],['$1']}]).

       Although	 the  record syntax is used, it	is still hard to read and even
       harder to write.	The first element of the  tuple,  #emp{empno  =	 '$1',
       dept  =	sales, _='_'}, tells what to match. Elements not matching this
       are not returned, as in the ets:match/2 example.	 The  second  element,
       the  empty  list, is a list of guard expressions, which we do not need.
       The third element is the	list of	expressions  constructing  the	return
       value (in ETS this is almost always a list containing one single	term).
       In our case '$1'	is bound to the	employee number	in the head (first el-
       ement of	the tuple), and	hence the employee number is returned. The re-
       sult is ["011103","076324"], as in the ets:foldr/3 example, but the re-
       sult is retrieved much more efficiently in terms	of execution speed and
       memory consumption.

       Using ets:fun2ms/1, we can combine the ease of use of  the  ets:foldr/3
       and the efficiency of the pure ets:select/2 example:

       -include_lib("stdlib/include/ms_transform.hrl").

       ets:select(emp_tab, ets:fun2ms(
			     fun(#emp{empno = E, dept =	sales})	->
				     E
			     end)).

       This  example  requires no special knowledge of match specifications to
       understand. The head of the fun matches what you	want to	filter out and
       the body	returns	what you want returned.	As long	as the fun can be kept
       within the limits of the	match specifications,  there  is  no  need  to
       transfer	 all  table  data  to  the  process  for  filtering  as	in the
       ets:foldr/3 example. It is easier to read than the ets:foldr/3 example,
       as  the	select	call  in itself	discards anything that does not	match,
       while the fun of	the ets:foldr/3	call needs to handle both the elements
       matching	and the	ones not matching.

       In  the	ets:fun2ms/1  example above, it	is needed to include ms_trans-
       form.hrl	in the source code, as this is what triggers the parse	trans-
       formation of the	ets:fun2ms/1 call to a valid match specification. This
       also implies that the transformation is done at	compile	 time  (except
       when  called  from  the shell) and therefore takes no resources in run-
       time. That is, although you use the more	intuitive fun syntax, it  gets
       as efficient in runtime as writing match	specifications by hand.

EXAMPLE	2
       Assume  that we want to get all the employee numbers of employees hired
       before year 2000. Using ets:match/2 is not an alternative here, as  re-
       lational	 operators  cannot be expressed	there. Once again, ets:foldr/3
       can do it (slowly, but correct):

       ets:foldr(fun(#emp{empno	= E, empyear = Y},Acc) when Y <	2000 ->	[E | Acc];
			 (_,Acc) -> Acc
		 end,
		 [],
		 emp_tab).

       The result is  ["052341","076324","535216","789789","989891"],  as  ex-
       pected.	The equivalent expression using	a handwritten match specifica-
       tion would look like this:

       ets:select(emp_tab, [{#emp{empno	= '$1',	empyear	= '$2',	_='_'},
			    [{'<', '$2', 2000}],
			    ['$1']}]).

       This gives the same result. [{'_', '$2',	2000}] is in  the  guard  part
       and therefore discards anything that does not have an empyear (bound to
       '$2' in the head) less than 2000, as the	guard in the foldr/3 example.

       We write	it using ets:fun2ms/1:

       -include_lib("stdlib/include/ms_transform.hrl").

       ets:select(emp_tab, ets:fun2ms(
			     fun(#emp{empno = E, empyear = Y}) when Y <	2000 ->
				  E
			     end)).

EXAMPLE	3
       Assume that we want the whole object matching instead of	only one  ele-
       ment.  One  alternative	is  to	assign a variable to every part	of the
       record and build	it up once again in the	body of	the fun, but the  fol-
       lowing is easier:

       ets:select(emp_tab, ets:fun2ms(
			     fun(Obj = #emp{empno = E, empyear = Y})
				when Y < 2000 ->
				     Obj
			     end)).

       As  in  ordinary	 Erlang	matching, you can bind a variable to the whole
       matched object using a "match inside the	match",	that is, a =. Unfortu-
       nately  in  funs	translated to match specifications, it is allowed only
       at the "top-level", that	is, matching the whole object arriving	to  be
       matched	into  a	 separate  variable.  If you are used to writing match
       specifications by hand, we mention that variable	A is simply translated
       into  '$_'.  Alternatively,  pseudo  function object/0 also returns the
       whole matched object, see section  Warnings and Restrictions.

EXAMPLE	4
       This example concerns the body of the fun.  Assume  that	 all  employee
       numbers	beginning  with	zero (0) must be changed to begin with one (1)
       instead,	and that  we  want  to	create	the  list  [{_Old  empno_,_New
       empno_}]:

       ets:select(emp_tab, ets:fun2ms(
			     fun(#emp{empno = [$0 | Rest] }) ->
				     {[$0|Rest],[$1|Rest]}
			     end)).

       This  query  hits the feature of	partially bound	keys in	table type or-
       dered_set, so that not the whole	table needs to be searched,  only  the
       part containing keys beginning with 0 is	looked into.

EXAMPLE	5
       The fun can have	many clauses. Assume that we want to do	the following:

	 * If  an  employee  started before 1997, return the tuple {inventory,
	   _employee number_}.

	 * If an employee started 1997	or  later,  but	 before	 2001,	return
	   {rookie, _employee number_}.

	 * For all other employees, return {newbie, _employee number_},	except
	   for those named Smith as they would be affronted by anything	 other
	   than	 the tag guru and that is also what is returned	for their num-
	   bers: {guru,	_employee number_}.

       This is accomplished as follows:

       ets:select(emp_tab, ets:fun2ms(
			     fun(#emp{empno = E, surname = "Smith" }) ->
				     {guru,E};
				(#emp{empno = E, empyear = Y}) when Y <	1997  ->
				     {inventory, E};
				(#emp{empno = E, empyear = Y}) when Y >	2001  ->
				     {newbie, E};
				(#emp{empno = E, empyear = Y}) -> % 1997 -- 2001
				     {rookie, E}
			     end)).

       The result is as	follows:

       [{rookie,"011103"},
	{rookie,"041231"},
	{guru,"052341"},
	{guru,"076324"},
	{newbie,"122334"},
	{rookie,"535216"},
	{inventory,"789789"},
	{newbie,"963721"},
	{rookie,"989891"}]

USEFUL BIFS
       What more can you do? A simple answer  is:  see	the  documentation  of
       match  specifications in	ERTS User's Guide. However, the	following is a
       brief overview of the most useful "built-in functions" that you can use
       when  the  fun  is  to  be  translated  into  a	match specification by
       ets:fun2ms/1. It	is not possible	to call	other functions	than those al-
       lowed  in  match	specifications.	No "usual" Erlang code can be executed
       by the fun that is translated by	ets:fun2ms/1. The fun is  limited  ex-
       actly  to  the power of the match specifications, which is unfortunate,
       but the price one must pay for the execution speed of ets:select/2 com-
       pared to	ets:foldl/foldr.

       The  head of the	fun is a head matching (or mismatching)	one parameter,
       one object of the table we select from. The object is always  a	single
       variable	(can be	_) or a	tuple, as ETS, Dets, and Mnesia	tables include
       that. The match specification returned by ets:fun2ms/1 can be used with
       dets:select/2  and mnesia:select/2, and with ets:select/2. The use of =
       in the head is allowed (and encouraged) at the top-level.

       The guard section can contain any guard expression of Erlang. The  fol-
       lowing is a list	of BIFs	and expressions:

	 * Type	 tests:	 is_atom,  is_float,  is_integer,  is_list, is_number,
	   is_pid, is_port, is_reference,  is_tuple,  is_binary,  is_function,
	   is_record

	 * Boolean operators: not, and,	or, andalso, orelse

	 * Relational operators: >, >=,	<, =<, =:=, ==,	=/=, /=

	 * Arithmetics:	+, -, *, div, rem

	 * Bitwise operators: band, bor, bxor, bnot, bsl, bsr

	 * The	guard  BIFs:  abs, element, hd,	length,	node, round, size, tl,
	   trunc, self

       Contrary	to the	fact  with  "handwritten"  match  specifications,  the
       is_record guard works as	in ordinary Erlang code.

       Semicolons  (;)	in guards are allowed, the result is (as expected) one
       "match specification clause" for	each semicolon-separated part  of  the
       guard. The semantics is identical to the	Erlang semantics.

       The  body of the	fun is used to construct the resulting value. When se-
       lecting from tables, one	usually	construct a suiting term  here,	 using
       ordinary	 Erlang	term construction, like	tuple parentheses, list	brack-
       ets, and	variables matched out in the head,  possibly  with  the	 occa-
       sional  constant.  Whatever  expressions	are allowed in guards are also
       allowed here, but no special functions exist except object and bindings
       (see  further  down),  which  returns  the whole	matched	object and all
       known variable bindings,	respectively.

       The dbg variants	of match specifications	have an	imperative approach to
       the match specification body, the ETS dialect has not. The fun body for
       ets:fun2ms/1 returns the	result without side effects. As	 matching  (=)
       in the body of the match	specifications is not allowed (for performance
       reasons)	the only thing left, more or less, is term construction.

EXAMPLE	WITH DBG
       This section describes  the  slightly  different	 match	specifications
       translated by dbg:fun2ms/1.

       The same	reasons	for using the parse transformation apply to dbg, maybe
       even more, as filtering using Erlang code is not	a good idea when trac-
       ing  (except  afterwards, if you	trace to file).	The concept is similar
       to that of ets:fun2ms/1 except that you usually use  it	directly  from
       the shell (which	can also be done with ets:fun2ms/1).

       The following is	an example module to trace on:

       -module(toy).

       -export([start/1, store/2, retrieve/1]).

       start(Args) ->
	   toy_table = ets:new(toy_table, Args).

       store(Key, Value) ->
	   ets:insert(toy_table, {Key,Value}).

       retrieve(Key) ->
	   [{Key, Value}] = ets:lookup(toy_table, Key),
	   Value.

       During  model  testing,	the  first  test  results  in {badmatch,16} in
       {toy,start,1}, why?

       We suspect the ets:new/2	call, as we match hard on  the	return	value,
       but want	only the particular new/2 call with toy_table as first parame-
       ter. So we start	a default tracer on the	node:

       1> dbg:tracer().
       {ok,<0.88.0>}

       We turn on call tracing for all processes, we want to make a pretty re-
       strictive  trace	 pattern, so there is no need to call trace only a few
       processes (usually it is	not):

       2> dbg:p(all,call).
       {ok,[{matched,nonode@nohost,25}]}

       We  specify  the	 filter,  we  want  to	view   calls   that   resemble
       ets:new(toy_table, _something_):

       3> dbg:tp(ets,new,dbg:fun2ms(fun([toy_table,_]) -> true end)).
       {ok,[{matched,nonode@nohost,1},{saved,1}]}

       As  can	be seen, the fun used with dbg:fun2ms/1	takes a	single list as
       parameter instead of a single tuple. The	list matches a list of the pa-
       rameters	 to  the  traced function. A single variable can also be used.
       The body	of the fun expresses, in a more	imperative way,	actions	to  be
       taken  if the fun head (and the guards) matches.	true is	returned here,
       only because the	body of	a fun cannot be	empty.	The  return  value  is
       discarded.

       The following trace output is received during test:

       (<0.86.0>) call ets:new(toy_table, [ordered_set])

       Assume  that  we	 have  not found the problem yet, and want to see what
       ets:new/2 returns. We use a slightly different trace pattern:

       4> dbg:tp(ets,new,dbg:fun2ms(fun([toy_table,_]) -> return_trace() end)).

       The following trace output is received during test:

       (<0.86.0>) call ets:new(toy_table,[ordered_set])
       (<0.86.0>) returned from	ets:new/2 -> 24

       The call	to return_trace	results	in a trace message when	 the  function
       returns.	 It  applies only to the specific function call	triggering the
       match specification (and	matching the head/guards of the	match specifi-
       cation).	This is	by far the most	common call in the body	of a dbg match
       specification.

       The test	now fails with {badmatch,24} because the atom  toy_table  does
       not  match the number returned for an unnamed table. So,	the problem is
       found, the table	is to be named,	and the	arguments supplied by the test
       program do not include named_table. We rewrite the start	function:

       start(Args) ->
	   toy_table = ets:new(toy_table, [named_table|Args]).

       With  the  same	tracing	 turned	 on, the following trace output	is re-
       ceived:

       (<0.86.0>) call ets:new(toy_table,[named_table,ordered_set])
       (<0.86.0>) returned from	ets:new/2 -> toy_table

       Assume that the module now passes all testing and goes into the system.
       After  a	while, it is found that	table toy_table	grows while the	system
       is running and that there are many elements with	atoms as keys. We  ex-
       pected  only  integer  keys  and	 so  does  the rest of the system, but
       clearly not the entire system. We turn on call tracing and try  to  see
       calls to	the module with	an atom	as the key:

       1> dbg:tracer().
       {ok,<0.88.0>}
       2> dbg:p(all,call).
       {ok,[{matched,nonode@nohost,25}]}
       3> dbg:tpl(toy,store,dbg:fun2ms(fun([A,_]) when is_atom(A) -> true end)).
       {ok,[{matched,nonode@nohost,1},{saved,1}]}

       We use dbg:tpl/3	to ensure to catch local calls (assume that the	module
       has grown since the smaller version and we are unsure if	this inserting
       of  atoms  is  not  done	locally). When in doubt, always	use local call
       tracing.

       Assume that nothing happens when	tracing	in this	way. The  function  is
       never called with these parameters. We conclude that someone else (some
       other module) is	doing it and realize that we  must  trace  on  ets:in-
       sert/2  and  want to see	the calling function. The calling function can
       be retrieved using the match specification function caller. To  get  it
       into  the  trace	message, the match specification function message must
       be used.	The filter call	looks like this	(looking for calls to  ets:in-
       sert/2):

       4> dbg:tpl(ets,insert,dbg:fun2ms(fun([toy_table,{A,_}]) when is_atom(A) ->
	message(caller())
	end)).
       {ok,[{matched,nonode@nohost,1},{saved,2}]}

       The  caller  is	now  displayed in the "additional message" part	of the
       trace output, and the following is displayed after a while:

       (<0.86.0>) call ets:insert(toy_table,{garbage,can}) ({evil_mod,evil_fun,2})

       You have	realized that function evil_fun	of the evil_mod	 module,  with
       arity 2,	is causing all this trouble.

       This  example  illustrates  the most used calls in match	specifications
       for dbg.	The other, more	esoteric, calls	are listed  and	 explained  in
       Match specifications in Erlang in ERTS User's Guide, as they are	beyond
       the scope of this description.

WARNINGS AND RESTRICTIONS
       The following warnings and restrictions apply to	the funs used in  with
       ets:fun2ms/1 and	dbg:fun2ms/1.

   Warning:
       To  use	the pseudo functions triggering	the translation, ensure	to in-
       clude the header	file ms_transform.hrl in the source code.  Failure  to
       do  so  possibly	results	in runtime errors rather than compile time, as
       the expression can be valid as a	plain Erlang program without  transla-
       tion.

   Warning:
       The  fun	must be	literally constructed inside the parameter list	to the
       pseudo functions. The fun cannot	be bound to a variable first and  then
       passed  to ets:fun2ms/1 or dbg:fun2ms/1.	For example, ets:fun2ms(fun(A)
       -_ A end) works,	but not	F = fun(A) -_ A	end, ets:fun2ms(F). The	latter
       results	in a compile-time error	if the header is included, otherwise a
       runtime error.

       Many restrictions apply to the fun that	is  translated	into  a	 match
       specification.  To  put	it  simple: you	cannot use anything in the fun
       that you	cannot use in a	match specification. This  means  that,	 among
       others, the following restrictions apply	to the fun itself:

	 * Functions  written  in  Erlang  cannot be called, neither can local
	   functions, global functions,	or real	funs.

	 * Everything that is written as a function call is translated into  a
	   match  specification	 call to a built-in function, so that the call
	   is_list(X) is translated to {'is_list', '$1'} ('$1' is only an  ex-
	   ample,  the	numbering  can	vary). If one tries to call a function
	   that	is not a match specification built-in, it causes an error.

	 * Variables occurring in the head of the fun are  replaced  by	 match
	   specification  variables  in	the order of occurrence, so that frag-
	   ment	fun({A,B,C}) is	replaced by {'$1', '$2', '$3'},	and so on. Ev-
	   ery occurrence of such a variable in	the match specification	is re-
	   placed by a match specification variable in the same	way,  so  that
	   the	fun  fun({A,B})	 when  is_atom(A)  -_ B	end is translated into
	   [{{'$1','$2'},[{is_atom,'$1'}],['$2']}].

	 * Variables that are not included in the head are imported  from  the
	   environment	and  made  into	match specification const expressions.
	   Example from	the shell:

	 1> X =	25.
	 25
	 2> ets:fun2ms(fun({A,B}) when A > X ->	B end).
	 [{{'$1','$2'},[{'>','$1',{const,25}}],['$2']}]

	 * Matching with = cannot be used in the body. It can only be used  on
	   the top-level in the	head of	the fun. Example from the shell	again:

	 1> ets:fun2ms(fun({A,[B|C]} = D) when A > B ->	D end).
	 [{{'$1',['$2'|'$3']},[{'>','$1','$2'}],['$_']}]
	 2> ets:fun2ms(fun({A,[B|C]=D})	when A > B -> D	end).
	 Error:	fun with head matching ('=' in head) cannot be translated into
	 match_spec
	 {error,transform_error}
	 3> ets:fun2ms(fun({A,[B|C]}) when A > B -> D =	[B|C], D end).
	 Error:	fun with body matching ('=' in body) is	illegal	as match_spec
	 {error,transform_error}

	   All	variables  are	bound in the head of a match specification, so
	   the translator cannot allow multiple	 bindings.  The	 special  case
	   when	 matching  is done on the top-level makes the variable bind to
	   '$_'	in the resulting match specification. It is to	allow  a  more
	   natural  access  to	the  whole matched object. Pseudo function ob-
	   ject() can be used instead, see below.

	   The following expressions are translated equally:

	 ets:fun2ms(fun({a,_} =	A) -> A	end).
	 ets:fun2ms(fun({a,_}) -> object() end).

	 * The special match specification variables '$_' and '$*' can be  ac-
	   cessed  through  the	pseudo functions object() (for '$_') and bind-
	   ings() (for '$*'). As an example, one can translate	the  following
	   ets:match_object/2 call to a	ets:select/2 call:

	 ets:match_object(Table, {'$1',test,'$2'}).

	   This	is the same as:

	 ets:select(Table, ets:fun2ms(fun({A,test,B}) -> object() end)).

	   In  this  simple case, the former expression	is probably preferable
	   in terms of readability.

	   The ets:select/2 call conceptually looks like this in the resulting
	   code:

	 ets:select(Table, [{{'$1',test,'$2'},[],['$_']}]).

	   Matching on the top-level of	the fun	head can be a more natural way
	   to access '$_', see above.

	 * Term	constructions/literals are translated as much as is needed  to
	   get	them  into valid match specification. This way tuples are made
	   into	match specification tuple constructions	(a one	element	 tuple
	   containing  the  tuple)  and	constant expressions are used when im-
	   porting variables from the environment. Records are also translated
	   into	 plain	tuple  constructions, calls to element,	and so on. The
	   guard test is_record/2 is translated	into match specification  code
	   using the three parameter version that is built into	match specifi-
	   cation,    so    that    is_record(A,t)    is    translated	  into
	   {is_record,'$1',t,5}	if the record size of record type t is 5.

	 * Language  constructions  such  as  case, if,	and catch that are not
	   present in match specifications are not allowed.

	 * If header file ms_transform.hrl is not included,  the  fun  is  not
	   translated,	which  can  result  in	a  runtime error (depending on
	   whether the fun is valid in a pure Erlang context).

	   Ensure that the header is included when using ets and  dbg:fun2ms/1
	   in compiled code.

	 * If  pseudo function triggering the translation is ets:fun2ms/1, the
	   head	of the fun must	contain	a single variable or a	single	tuple.
	   If  the  pseudo  function is	dbg:fun2ms/1, the head of the fun must
	   contain a single variable or	a single list.

       The translation from funs to match specifications is  done  at  compile
       time,  so  runtime  performance	is  not	affected by using these	pseudo
       functions.

       For more	information about match	specifications,	see the	Match specifi-
       cations in Erlang in ERTS User's	Guide.

EXPORTS
       format_error(Error) -> Chars

	      Types:

		 Error = {error, module(), term()}
		 Chars = io_lib:chars()

	      Takes  an	 error	code returned by one of	the other functions in
	      the module and creates a textual description of the error.

       parse_transform(Forms, Options) -> Forms2 | Errors | Warnings

	      Types:

		 Forms	  =    Forms2	 =    [erl_parse:abstract_form()     |
		 erl_parse:form_info()]
		 Options = term()
		   Option list,	required but not used.
		 Errors	= {error, ErrInfo :: [tuple()],	WarnInfo :: []}
		 Warnings = {warning, Forms2, WarnInfo :: [tuple()]}

	      Implements  the transformation at	compile	time. This function is
	      called by	the compiler to	do the source code  transformation  if
	      and  when	header file ms_transform.hrl is	included in the	source
	      code.

	      For information about how	to use this parse transformation,  see
	      ets and dbg:fun2ms/1.

	      For  a  description  of match specifications, see	section	 Match
	      Specification in Erlang in ERTS User's Guide.

       transform_from_shell(Dialect, Clauses, BoundEnvironment)	-> term()

	      Types:

		 Dialect = ets | dbg
		 Clauses = [erl_parse:abstract_clause()]
		 BoundEnvironment = erl_eval:binding_struct()
		   List	of variable bindings in	the shell environment.

	      Implements the transformation when the  fun2ms/1	functions  are
	      called  from  the	 shell.	In this	case, the abstract form	is for
	      one single fun (parsed by	the Erlang shell). All imported	 vari-
	      ables  are  to  be in the	key-value list passed as BoundEnviron-
	      ment. The	result is a term, normalized, that is, not in abstract
	      format.

Ericsson AB			  stdlib 3.8		       ms_transform(3)

NAME | DESCRIPTION | EXAMPLE 1 | EXAMPLE 2 | EXAMPLE 3 | EXAMPLE 4 | EXAMPLE 5 | USEFUL BIFS | EXAMPLE WITH DBG | WARNINGS AND RESTRICTIONS | EXPORTS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ms_transform&sektion=3&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help