Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
MPSUTIL(8)		FreeBSD	System Manager's Manual		    MPSUTIL(8)

     mpsutil, mprutil -- Utility for managing LSI Fusion-MPT 2/3 controllers

     mpsutil version
     mpsutil [-u unit] show adapter
     mpsutil [-u unit] show adapters
     mpsutil [-u unit] show all
     mpsutil [-u unit] show cfgpage page [num] [addr]
     mpsutil [-u unit] show devices
     mpsutil [-u unit] show enclosures
     mpsutil [-u unit] show expanders
     mpsutil [-u unit] show iocfacts
     mpsutil [-u unit] set ncq [enable|disable]
     mpsutil [-u unit] flash save [firmware|bios] [file]
     mpsutil [-u unit] flash update [firmware|bios] file

     The mpsutil utility can be	used to	display	or modify various parameters
     on	LSI Fusion-MPS 2 controllers.

     The mprutil utility can be	used to	display	or modify various parameters
     on	LSI Fusion-MPS 3 controllers.

     The mprutil utility behave	identically to mpsutil.	 (same program)

     Each invocation of	mpsutil	consists of zero or more global	options	fol-
     lowed by a	command.  Commands may support additional optional or required
     arguments after the command.

     Currently one global option is supported:

     -u	unit
	     unit specifies the	unit of	the controller to work with.  If no
	     unit is specified,	then unit 0 is used.

     The mpsutil utility supports several different groups of commands.	 The
     first group of commands provide information about the controller.	The
     second group of commands are used to manager controller-wide operations.

     The informational commands	include:

	     Displays the version of mpsutil.

     show adapter
	     Displays information about	the controller such as the model num-
	     ber or firmware version.

     show adapters
	     Displays a	summary	of all adapters.

     show all
	     Displays all devices, expanders and enclosures.

     show devices
	     Displays all devices.

     show expanders
	     Displays all expanders.

     show enclosures
	     Displays all enclosures.

     show iocfacts
	     Displays IOC Facts	messages.

     show cfgpage page [num] [addr]
	     Dump raw config page in hex.

     Controller	management commands include:

     set ncq [enable|disable]
	     Enables or	disables NCQ in	the NVRAM of the card.

     flash save	[firmware|bios]	[file]
	     Save the firmware or bios from the	controller into	a local	file.
	     If	no file	is specified then the file will	be named firmware or

     flash update [firmware|bios] file
	     Replace the firmware or bios from the controller with the one
	     specified via file.

     mpr(4), mps(4)

     The mpsutil utility first appeared	in FreeBSD 11.0.

     Flash operations (save/update) are	not supported on big-endian architec-

FreeBSD	13.0			  May 7, 2021			  FreeBSD 13.0


Want to link to this manual page? Use this URL:

home | help