Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
LESS(1)			    General Commands Manual		       LESS(1)

NAME
       less - opposite of more

SYNOPSIS
       less -?
       less --help
       less -V
       less --version
       less [-[+]aABcCdeEfFgGiIJKLmMnNqQrRsSuUVwWX~]
	    [-b	space] [-h lines] [-j line] [-k	keyfile]
	    [-{oO} logfile] [-p	pattern] [-P prompt] [-t tag]
	    [-T	tagsfile] [-x tab,...] [-y lines] [-[z]	lines]
	    [-#	shift] [+[+]cmd] [--] [filename]...
       (See  the  OPTIONS section for alternate	option syntax with long	option
       names.)

DESCRIPTION
       Less is a program similar to more (1), but which	allows backward	 move-
       ment in the file	as well	as forward movement.  Also, less does not have
       to read the entire input	file before  starting,	so  with  large	 input
       files  it  starts  up  faster than text editors like vi (1).  Less uses
       termcap (or terminfo on some systems), so it can	run on	a  variety  of
       terminals.   There is even limited support for hardcopy terminals.  (On
       a hardcopy terminal, lines which	should be printed at the  top  of  the
       screen are prefixed with	a caret.)

       Commands	 are based on both more	and vi.	 Commands may be preceded by a
       decimal number, called N	in the descriptions below.  The	number is used
       by some commands, as indicated.

COMMANDS
       In  the following descriptions, ^X means	control-X.  ESC	stands for the
       ESCAPE  key;  for  example  ESC-v  means	 the  two  character  sequence
       "ESCAPE", then "v".

       h or H Help:  display  a	 summary of these commands.  If	you forget all
	      the other	commands, remember this	one.

       SPACE or	^V or f	or ^F
	      Scroll forward N	lines,	default	 one  window  (see  option  -z
	      below).	If  N  is  more	 than  the screen size,	only the final
	      screenful	is displayed.  Warning:	some systems use ^V as a  spe-
	      cial literalization character.

       z      Like  SPACE,  but	 if  N is specified, it	becomes	the new	window
	      size.

       ESC-SPACE
	      Like SPACE, but scrolls a	full screenful,	 even  if  it  reaches
	      end-of-file in the process.

       ENTER or	RETURN or ^N or	e or ^E	or j or	^J
	      Scroll  forward N	lines, default 1.  The entire N	lines are dis-
	      played, even if N	is more	than the screen	size.

       d or ^D
	      Scroll forward N lines, default one half of the screen size.  If
	      N	 is specified, it becomes the new default for subsequent d and
	      u	commands.

       b or ^B or ESC-v
	      Scroll backward N	lines,	default	 one  window  (see  option  -z
	      below).	If  N  is  more	 than  the screen size,	only the final
	      screenful	is displayed.

       w      Like ESC-v, but if N is specified, it  becomes  the  new	window
	      size.

       y or ^Y or ^P or	k or ^K
	      Scroll backward N	lines, default 1.  The entire N	lines are dis-
	      played, even if N	is more	than the screen	size.	Warning:  some
	      systems use ^Y as	a special job control character.

       u or ^U
	      Scroll  backward	N  lines, default one half of the screen size.
	      If N is specified, it becomes the	new default for	 subsequent  d
	      and u commands.

       J      Like j, but continues to scroll beyond the end of	the file.

       K or Y Like  k,	but  continues	to  scroll beyond the beginning	of the
	      file.

       ESC-) or	RIGHTARROW
	      Scroll horizontally right	N characters, default half the	screen
	      width  (see  the	-#  option).   If  a number N is specified, it
	      becomes the default for future  RIGHTARROW  and  LEFTARROW  com-
	      mands.   While  the  text	 is scrolled, it acts as though	the -S
	      option (chop lines) were in effect.

       ESC-( or	LEFTARROW
	      Scroll horizontally left N characters, default half  the	screen
	      width  (see  the	-#  option).   If  a number N is specified, it
	      becomes the default for future  RIGHTARROW  and  LEFTARROW  com-
	      mands.

       ESC-} or	^RIGHTARROW
	      Scroll  horizontally  right  to show the end of the longest dis-
	      played line.

       ESC-{ or	^LEFTARROW
	      Scroll horizontally left back to the first column.

       r or ^R or ^L
	      Repaint the screen.

       R      Repaint the screen, discarding any buffered  input.   Useful  if
	      the file is changing while it is being viewed.

       F      Scroll  forward, and keep	trying to read when the	end of file is
	      reached.	Normally this command would be used  when  already  at
	      the  end of the file.  It	is a way to monitor the	tail of	a file
	      which is growing while it	is being  viewed.   (The  behavior  is
	      similar to the "tail -f" command.)

       ESC-F  Like  F,	but  as	soon as	a line is found	which matches the last
	      search pattern, the terminal bell	is rung	and forward  scrolling
	      stops.

       g or < or ESC-<
	      Go to line N in the file,	default	1 (beginning of	file).	(Warn-
	      ing: this	may be slow if N is large.)

       G or > or ESC->
	      Go to line N in the file,	default	the end	of the	file.	(Warn-
	      ing:  this  may  be slow if N is large, or if N is not specified
	      and standard input, rather than a	file, is being read.)

       ESC-G  Same as G, except	if no number N is specified and	the  input  is
	      standard	input,	goes  to  the  last  line  which  is currently
	      buffered.

       p or % Go to a position N percent into the file.	 N should be between 0
	      and 100, and may contain a decimal point.

       P      Go to the	line containing	byte offset N in the file.

       {      If a left	curly bracket appears in the top line displayed	on the
	      screen, the { command  will  go  to  the	matching  right	 curly
	      bracket.	 The matching right curly bracket is positioned	on the
	      bottom line of the screen.  If there is more than	one left curly
	      bracket  on  the top line, a number N may	be used	to specify the
	      N-th bracket on the line.

       }      If a right curly bracket appears in the bottom line displayed on
	      the  screen,  the	 }  command will go to the matching left curly
	      bracket.	The matching left curly	bracket	is positioned  on  the
	      top  line	 of the	screen.	 If there is more than one right curly
	      bracket on the top line, a number	N may be used to  specify  the
	      N-th bracket on the line.

       (      Like {, but applies to parentheses rather	than curly brackets.

       )      Like }, but applies to parentheses rather	than curly brackets.

       [      Like  {, but applies to square brackets rather than curly	brack-
	      ets.

       ]      Like }, but applies to square brackets rather than curly	brack-
	      ets.

       ESC-^F Followed	by two characters, acts	like {,	but uses the two char-
	      acters as	open and close brackets, respectively.	 For  example,
	      "ESC  ^F < >" could be used to go	forward	to the > which matches
	      the < in the top displayed line.

       ESC-^B Followed by two characters, acts like }, but uses	the two	 char-
	      acters  as  open and close brackets, respectively.  For example,
	      "ESC ^B <	>" could be used to go backward	to the < which matches
	      the > in the bottom displayed line.

       m      Followed	by  any	lowercase or uppercase letter, marks the first
	      displayed	line with  that	 letter.   If  the  status  column  is
	      enabled  via  the	 -J option, the	status column shows the	marked
	      line.

       M      Acts like	m, except the last displayed  line  is	marked	rather
	      than the first displayed line.

       '      (Single  quote.)	Followed by any	lowercase or uppercase letter,
	      returns to the position which was	previously  marked  with  that
	      letter.	Followed by another single quote, returns to the posi-
	      tion at which the	last "large" movement  command	was  executed.
	      Followed	by a ^ or $, jumps to the beginning or end of the file
	      respectively.  Marks are preserved when a	new file is  examined,
	      so the ' command can be used to switch between input files.

       ^X^X   Same as single quote.

       ESC-m  Followed	by  any	lowercase or uppercase letter, clears the mark
	      identified by that letter.

       /pattern
	      Search forward in	the file for the N-th line containing the pat-
	      tern.  N defaults	to 1.  The pattern is a	regular	expression, as
	      recognized by the	regular	expression library  supplied  by  your
	      system.	The search starts at the first line displayed (but see
	      the -a and -j options, which change this).

	      Certain characters are special if	entered	at  the	 beginning  of
	      the  pattern;  they modify the type of search rather than	become
	      part of the pattern:

	      ^N or !
		     Search for	lines which do NOT match the pattern.

	      ^E or *
		     Search multiple files.  That is, if  the  search  reaches
		     the  END of the current file without finding a match, the
		     search continues in the next file	in  the	 command  line
		     list.

	      ^F or @
		     Begin  the	 search	at the first line of the FIRST file in
		     the command line list, regardless of  what	 is  currently
		     displayed	on  the	screen or the settings of the -a or -j
		     options.

	      ^K     Highlight any text	which matches the pattern on the  cur-
		     rent screen, but don't move to the	first match (KEEP cur-
		     rent position).

	      ^R     Don't interpret regular expression	 metacharacters;  that
		     is, do a simple textual comparison.

       ?pattern
	      Search  backward	in  the	 file for the N-th line	containing the
	      pattern.	The search starts at the last line displayed (but  see
	      the -a and -j options, which change this).

	      Certain characters are special as	in the / command:

	      ^N or !
		     Search for	lines which do NOT match the pattern.

	      ^E or *
		     Search  multiple  files.	That is, if the	search reaches
		     the beginning of  the  current  file  without  finding  a
		     match,  the  search continues in the previous file	in the
		     command line list.

	      ^F or @
		     Begin the search at the last line of the last file	in the
		     command  line  list, regardless of	what is	currently dis-
		     played on the screen or the settings  of  the  -a	or  -j
		     options.

	      ^K     As	in forward searches.

	      ^R     As	in forward searches.

       ESC-/pattern
	      Same as "/*".

       ESC-?pattern
	      Same as "?*".

       n      Repeat  previous	search,	for N-th line containing the last pat-
	      tern.  If	the previous search was	modified by ^N,	the search  is
	      made  for	the N-th line NOT containing the pattern.  If the pre-
	      vious search was modified	by ^E, the  search  continues  in  the
	      next  (or	 previous)  file if not	satisfied in the current file.
	      If the previous search was modified by ^R, the  search  is  done
	      without  using  regular  expressions.  There is no effect	if the
	      previous search was modified by ^F or ^K.

       N      Repeat previous search, but in the reverse direction.

       ESC-n  Repeat previous  search,	but  crossing  file  boundaries.   The
	      effect is	as if the previous search were modified	by *.

       ESC-N  Repeat  previous search, but in the reverse direction and	cross-
	      ing file boundaries.

       ESC-u  Undo search highlighting.	  Turn	off  highlighting  of  strings
	      matching the current search pattern.  If highlighting is already
	      off because of a previous	ESC-u command, turn highlighting  back
	      on.   Any	 search	 command  will also turn highlighting back on.
	      (Highlighting can	also be	disabled by toggling the -G option; in
	      that case	search commands	do not turn highlighting back on.)

       &pattern
	      Display  only  lines which match the pattern; lines which	do not
	      match the	pattern	are not	displayed.  If pattern	is  empty  (if
	      you  type	 &  immediately	 followed  by ENTER), any filtering is
	      turned off, and all lines	are displayed.	While filtering	is  in
	      effect,  an  ampersand  is  displayed  at	 the  beginning	of the
	      prompt, as a reminder that some lines in the file	may be hidden.

	      Certain characters are special as	in the / command:

	      ^N or !
		     Display only lines	which do NOT match the pattern.

	      ^R     Don't interpret regular expression	 metacharacters;  that
		     is, do a simple textual comparison.

       :e [filename]
	      Examine  a  new file.  If	the filename is	missing, the "current"
	      file (see	the :n and :p commands below) from the list  of	 files
	      in  the  command line is re-examined.  A percent sign (%)	in the
	      filename is replaced by the name of the current file.   A	 pound
	      sign  (#)	 is  replaced  by  the name of the previously examined
	      file.   However,	two  consecutive  percent  signs  are	simply
	      replaced with a single percent sign.  This allows	you to enter a
	      filename that contains a percent sign in the  name.   Similarly,
	      two  consecutive	pound  signs  are replaced with	a single pound
	      sign.  The filename is inserted into the command	line  list  of
	      files  so	 that it can be	seen by	subsequent :n and :p commands.
	      If the filename consists of several files, they are all inserted
	      into  the	 list  of files	and the	first one is examined.	If the
	      filename contains	one or more spaces, the	entire filename	should
	      be enclosed in double quotes (also see the -" option).

       ^X^V or E
	      Same  as :e.  Warning: some systems use ^V as a special literal-
	      ization character.  On such systems, you may not be able to  use
	      ^V.

       :n     Examine  the next	file (from the list of files given in the com-
	      mand line).  If a	number N is specified, the N-th	next  file  is
	      examined.

       :p     Examine the previous file	in the command line list.  If a	number
	      N	is specified, the N-th previous	file is	examined.

       :x     Examine the first	file in	the command line list.	If a number  N
	      is specified, the	N-th file in the list is examined.

       :d     Remove the current file from the list of files.

       t      Go  to the next tag, if there were more than one matches for the
	      current tag.  See	the -t option for more details about tags.

       T      Go to the	previous tag, if there were more than one matches  for
	      the current tag.

       = or ^G or :f
	      Prints  some  information	about the file being viewed, including
	      its name and the line number and byte offset of the bottom  line
	      being  displayed.	 If possible, it also prints the length	of the
	      file, the	number of lines	in the file and	 the  percent  of  the
	      file above the last displayed line.

       -      Followed	by one of the command line option letters (see OPTIONS
	      below), this will	change the setting of that option and print  a
	      message  describing  the	new  setting.	If a ^P	(CONTROL-P) is
	      entered immediately after	the dash, the setting of the option is
	      changed  but  no message is printed.  If the option letter has a
	      numeric value (such as -b	or -h),	or a string value (such	as  -P
	      or  -t), a new value may be entered after	the option letter.  If
	      no new value is entered, a message describing the	 current  set-
	      ting is printed and nothing is changed.

       --     Like  the	 -  command, but takes a long option name (see OPTIONS
	      below) rather than a single option letter.  You must press ENTER
	      or  RETURN after typing the option name.	A ^P immediately after
	      the second dash suppresses printing of a message describing  the
	      new setting, as in the - command.

       -+     Followed	by  one	 of  the command line option letters this will
	      reset the	option to its default  setting	and  print  a  message
	      describing  the  new  setting.  (The "-+X" command does the same
	      thing as "-+X" on	the command line.)  This  does	not  work  for
	      string-valued options.

       --+    Like  the	-+ command, but	takes a	long option name rather	than a
	      single option letter.

       -!     Followed by one of the command line option  letters,  this  will
	      reset  the  option  to the "opposite" of its default setting and
	      print a message describing the new setting.  This	does not  work
	      for numeric or string-valued options.

       --!    Like  the	-! command, but	takes a	long option name rather	than a
	      single option letter.

       _      (Underscore.)  Followed by one of	the command line  option  let-
	      ters,  this  will	print a	message	describing the current setting
	      of that option.  The setting of the option is not	changed.

       __     (Double underscore.)  Like the _ (underscore) command, but takes
	      a	long option name rather	than a single option letter.  You must
	      press ENTER or RETURN after typing the option name.

       +cmd   Causes the specified cmd to be executed each time	a new file  is
	      examined.	 For example, +G causes	less to	initially display each
	      file starting at the end rather than the beginning.

       V      Prints the version number	of less	being run.

       q or Q or :q or :Q or ZZ
	      Exits less.

       The following four commands may or may not be valid, depending on  your
       particular installation.

       v      Invokes  an  editor  to edit the current file being viewed.  The
	      editor is	taken from the environment variable VISUAL if defined,
	      or  EDITOR if VISUAL is not defined, or defaults to "vi" if nei-
	      ther VISUAL nor EDITOR is	defined.  See also the	discussion  of
	      LESSEDIT under the section on PROMPTS below.

       ! shell-command
	      Invokes  a shell to run the shell-command	given.	A percent sign
	      (%) in the command is replaced by	the name of the	current	 file.
	      A	pound sign (#) is replaced by the name of the previously exam-
	      ined file.  "!!" repeats the last	shell command.	 "!"  with  no
	      shell  command  simply  invokes  a  shell.  On Unix systems, the
	      shell is taken from the environment variable SHELL, or  defaults
	      to  "sh".	  On  MS-DOS and OS/2 systems, the shell is the	normal
	      command processor.

       | <m> shell-command
	      <m> represents any mark letter.  Pipes a section	of  the	 input
	      file  to the given shell command.	 The section of	the file to be
	      piped is between the position marked by the letter and the  cur-
	      rent  screen.  The entire	current	screen is included, regardless
	      of whether the marked position is	before or  after  the  current
	      screen.	<m> may	also be	^ or $ to indicate beginning or	end of
	      file respectively.  If <m> is . or newline, the  current	screen
	      is piped.

       s filename
	      Save  the	 input	to  a file.  This only works if	the input is a
	      pipe, not	an ordinary file.

OPTIONS
       Command line options are	described below.  Most options may be  changed
       while less is running, via the "-" command.

       Most  options  may be given in one of two forms:	either a dash followed
       by a single letter, or two dashes followed by a long  option  name.   A
       long  option  name  may	be  abbreviated	as long	as the abbreviation is
       unambiguous.  For example, --quit-at-eof	may be abbreviated --quit, but
       not --qui, since	both --quit-at-eof and --quiet begin with --qui.  Some
       long option names are in	uppercase, such	as --QUIT-AT-EOF, as  distinct
       from  --quit-at-eof.  Such option names need only have their first let-
       ter capitalized;	the remainder of the name may be in either case.   For
       example,	--Quit-at-eof is equivalent to --QUIT-AT-EOF.

       Options are also	taken from the environment variable "LESS".  For exam-
       ple, to avoid typing "less -options ..."	each time less is invoked, you
       might tell csh:

       setenv LESS "-options"

       or if you use sh:

       LESS="-options";	export LESS

       On  MS-DOS,  you	don't need the quotes, but you should replace any per-
       cent signs in the options string	by double percent signs.

       The environment variable	is parsed before the command line, so  command
       line  options  override	the  LESS  environment variable.  If an	option
       appears in the LESS variable, it	can be reset to	its default  value  on
       the command line	by beginning the command line option with "-+".

       Some  options  like -k or -D require a string to	follow the option let-
       ter.  The string	for that option	is considered to  end  when  a	dollar
       sign  ($)  is found.  For example, you can set two -D options on	MS-DOS
       like this:

       LESS="Dn9.1$Ds4.1"

       If the --use-backslash option appears earlier in	the  options,  then  a
       dollar  sign or backslash may be	included literally in an option	string
       by preceding it with a backslash.  If the --use-backslash option	is not
       in  effect, then	backslashes are	not treated specially, and there is no
       way to include a	dollar sign in the option string.

       -? or --help
	      This option displays a summary of	the commands accepted by  less
	      (the  same  as  the  h  command).	  (Depending on	how your shell
	      interprets the question mark, it may be necessary	to  quote  the
	      question mark, thus: "-\?".)

       -a or --search-skip-screen
	      By  default,  forward searches start at the top of the displayed
	      screen and backwards searches start at the bottom	 of  the  dis-
	      played  screen (except for repeated searches invoked by the n or
	      N	commands, which	 start	after  or  before  the	"target"  line
	      respectively; see	the -j option for more about the target	line).
	      The -a option causes forward searches to instead	start  at  the
	      bottom  of  the screen and backward searches to start at the top
	      of the screen, thus skipping all lines displayed on the screen.

       -A or --SEARCH-SKIP-SCREEN
	      Causes all forward searches (not just non-repeated searches)  to
	      start  just  after the target line, and all backward searches to
	      start just before	the target line.  Thus,	forward	searches  will
	      skip part	of the displayed screen	(from the first	line up	to and
	      including	the target line).  Similarly backwards	searches  will
	      skip the displayed screen	from the last line up to and including
	      the target line.	This was the default behavior in less versions
	      prior to 441.

       -bn or --buffers=n
	      Specifies	 the  amount  of  buffer  space	less will use for each
	      file, in units of	kilobytes (1024	bytes).	 By  default  64 K  of
	      buffer  space  is	used for each file (unless the file is a pipe;
	      see the -B option).  The -b  option  specifies  instead  that  n
	      kilobytes	of buffer space	should be used for each	file.  If n is
	      -1, buffer space is unlimited; that is, the entire file  can  be
	      read into	memory.

       -B or --auto-buffers
	      By default, when data is read from a pipe, buffers are allocated
	      automatically as needed.	If a large amount of data is read from
	      the  pipe,  this	can cause a large amount of memory to be allo-
	      cated.  The -B option disables this automatic allocation of buf-
	      fers for pipes, so that only 64 K	(or the	amount of space	speci-
	      fied by the -b option) is	used for the pipe.  Warning: use of -B
	      can  result  in  erroneous display, since	only the most recently
	      viewed part of the piped data is kept  in	 memory;  any  earlier
	      data is lost.

       -c or --clear-screen
	      Causes  full  screen  repaints  to  be painted from the top line
	      down.  By	default, full screen repaints are  done	 by  scrolling
	      from the bottom of the screen.

       -C or --CLEAR-SCREEN
	      Same as -c, for compatibility with older versions	of less.

       -d or --dumb
	      The -d option suppresses the error message normally displayed if
	      the terminal is dumb; that is, lacks some	important  capability,
	      such as the ability to clear the screen or scroll	backward.  The
	      -d option	does not otherwise change the behavior of  less	 on  a
	      dumb terminal.

       -Dxcolor	or --color=xcolor
	      [MS-DOS only] Sets the color of the text displayed.  x is	a sin-
	      gle character which selects the type  of	text  whose  color  is
	      being  set: n=normal, s=standout,	d=bold,	u=underlined, k=blink.
	      color is a pair of numbers separated by  a  period.   The	 first
	      number  selects  the foreground color and	the second selects the
	      background color of the text.  A single number N is the same  as
	      N.M,  where  M  is  the  normal background color.	 The color may
	      start or end with	u to use underline (with the normal color,  if
	      by  itself),  if	the  system supports it	(Windows only).	 x may
	      also be a	to toggle strict ANSI sequence rendering (SGR mode).

       -e or --quit-at-eof
	      Causes less to automatically exit	the  second  time  it  reaches
	      end-of-file.   By	 default, the only way to exit less is via the
	      "q" command.

       -E or --QUIT-AT-EOF
	      Causes less to automatically exit	the first time it reaches end-
	      of-file.

       -f or --force
	      Forces non-regular files to be opened.  (A non-regular file is a
	      directory	or a device special file.)  Also suppresses the	 warn-
	      ing message when a binary	file is	opened.	 By default, less will
	      refuse to	open non-regular files.	 Note that some	operating sys-
	      tems will	not allow directories to be read, even if -f is	set.

       -F or --quit-if-one-screen
	      Causes less to automatically exit	if the entire file can be dis-
	      played on	the first screen.

       -g or --hilite-search
	      Normally,	less will highlight ALL	strings	which match  the  last
	      search  command.	 The  -g option	changes	this behavior to high-
	      light only the particular	string which was  found	 by  the  last
	      search command.  This can	cause less to run somewhat faster than
	      the default.

       -G or --HILITE-SEARCH
	      The -G option suppresses all highlighting	of  strings  found  by
	      search commands.

       -hn or --max-back-scroll=n
	      Specifies	 a  maximum number of lines to scroll backward.	 If it
	      is necessary to scroll backward more than	n lines, the screen is
	      repainted	in a forward direction instead.	 (If the terminal does
	      not have the ability to scroll backward, -h0 is implied.)

       -i or --ignore-case
	      Causes searches to ignore	case; that is, uppercase and lowercase
	      are  considered identical.  This option is ignored if any	upper-
	      case letters appear in the search	pattern; in other words, if  a
	      pattern  contains	 uppercase  letters, then that search does not
	      ignore case.

       -I or --IGNORE-CASE
	      Like -i, but searches ignore case	even if	the  pattern  contains
	      uppercase	letters.

       -jn or --jump-target=n
	      Specifies	 a line	on the screen where the	"target" line is to be
	      positioned.  The target line is the line specified by  any  com-
	      mand  to	search for a pattern, jump to a	line number, jump to a
	      file percentage or jump to a tag.	 The screen line may be	speci-
	      fied  by	a number: the top line on the screen is	1, the next is
	      2, and so	on.  The number	may be negative	to specify a line rel-
	      ative to the bottom of the screen: the bottom line on the	screen
	      is -1, the second	to the bottom is -2, and so on.	  Alternately,
	      the  screen line may be specified	as a fraction of the height of
	      the screen, starting with	a decimal point: .5 is in  the	middle
	      of  the screen, .3 is three tenths down from the first line, and
	      so on.  If the line is specified as a fraction, the actual  line
	      number  is  recalculated	if  the	terminal window	is resized, so
	      that the target line remains at the specified  fraction  of  the
	      screen  height.	If any form of the -j option is	used, repeated
	      forward searches (invoked	with "n" or "N")  begin	 at  the  line
	      immediately   after  the	target	line,  and  repeated  backward
	      searches begin at	the target line, unless	changed	by -a  or  -A.
	      For  example,  if	 "-j4"	is used, the target line is the	fourth
	      line on the screen, so forward searches begin at the fifth  line
	      on  the  screen.	However	nonrepeated searches (invoked with "/"
	      or "?")  always begin at the start or end	of the current	screen
	      respectively.

       -J or --status-column
	      Displays	a  status  column at the left edge of the screen.  The
	      status column shows the lines that matched the  current  search,
	      and  any	lines  that  are marked	(via the m or M	command).  The
	      status column is also used if the	-w or -W option	is in effect.

       -kfilename or --lesskey-file=filename
	      Causes less to open and interpret	the named file	as  a  lesskey
	      (1) file.	 Multiple -k options may be specified.	If the LESSKEY
	      or LESSKEY_SYSTEM	environment variable is	set, or	if  a  lesskey
	      file is found in a standard place	(see KEY BINDINGS), it is also
	      used as a	lesskey	file.

       -K or --quit-on-intr
	      Causes less to exit immediately (with status 2) when  an	inter-
	      rupt  character  (usually	 ^C) is	typed.	Normally, an interrupt
	      character	causes less to stop whatever it	is doing and return to
	      its  command  prompt.   Note  that  use  of this option makes it
	      impossible to return to the command prompt from the "F" command.

       -L or --no-lessopen
	      Ignore the LESSOPEN environment variable	(see  the  INPUT  PRE-
	      PROCESSOR	 section  below).   This option	can be set from	within
	      less, but	it will	apply only to files opened  subsequently,  not
	      to the file which	is currently open.

       -m or --long-prompt
	      Causes  less  to	prompt verbosely (like more), with the percent
	      into the file.  By default, less prompts with a colon.

       -M or --LONG-PROMPT
	      Causes less to prompt even more verbosely	than more.

       -n or --line-numbers
	      Suppresses line numbers.	The default (to	use line numbers)  may
	      cause  less  to run more slowly in some cases, especially	with a
	      very large input file.  Suppressing line	numbers	 with  the  -n
	      option  will  avoid this problem.	 Using line numbers means: the
	      line number will be displayed in the verbose prompt and in the =
	      command,	and the	v command will pass the	current	line number to
	      the editor (see also  the	 discussion  of	 LESSEDIT  in  PROMPTS
	      below).

       -N or --LINE-NUMBERS
	      Causes  a	 line  number to be displayed at the beginning of each
	      line in the display.

       -ofilename or --log-file=filename
	      Causes less to copy its input to the named file as it  is	 being
	      viewed.  This applies only when the input	file is	a pipe,	not an
	      ordinary file.  If the file already exists, less	will  ask  for
	      confirmation before overwriting it.

       -Ofilename or --LOG-FILE=filename
	      The -O option is like -o,	but it will overwrite an existing file
	      without asking for confirmation.

	      If no log	file has been specified, the -o	and -O options can  be
	      used  from  within  less	to specify a log file.	Without	a file
	      name, they will simply report the	name of	the log	file.  The "s"
	      command is equivalent to specifying -o from within less.

       -ppattern or --pattern=pattern
	      The  -p  option  on the command line is equivalent to specifying
	      +/pattern; that is, it tells less	to start at the	 first	occur-
	      rence of pattern in the file.

       -Pprompt	or --prompt=prompt
	      Provides	a  way	to  tailor the three prompt styles to your own
	      preference.  This	option would normally be put in	the LESS envi-
	      ronment variable,	rather than being typed	in with	each less com-
	      mand.  Such an option must either	be the last option in the LESS
	      variable,	or be terminated by a dollar sign.
	       -Ps  followed by	a string changes the default (short) prompt to
	      that string.
	       -Pm changes the medium (-m) prompt.
	       -PM changes the long (-M) prompt.
	       -Ph changes the prompt for the help screen.
	       -P= changes the message printed by the =	command.
	       -Pw changes the message printed while waiting for data (in  the
	      F	command).

	      All  prompt strings consist of a sequence	of letters and special
	      escape sequences.	 See the section on PROMPTS for	more details.

       -q or --quiet or	--silent
	      Causes moderately	"quiet"	operation: the terminal	 bell  is  not
	      rung if an attempt is made to scroll past	the end	of the file or
	      before the beginning of the file.	 If the	terminal has a "visual
	      bell",  it  is  used  instead.  The bell will be rung on certain
	      other errors, such as typing an invalid character.  The  default
	      is to ring the terminal bell in all such cases.

       -Q or --QUIET or	--SILENT
	      Causes  totally  "quiet"	operation:  the	terminal bell is never
	      rung.

       -r or --raw-control-chars
	      Causes "raw" control characters to be displayed.	The default is
	      to  display  control  characters	using  the caret notation; for
	      example, a control-A (octal 001) is displayed as "^A".  Warning:
	      when the -r option is used, less cannot keep track of the	actual
	      appearance of the	screen (since this depends on how  the	screen
	      responds to each type of control character).  Thus, various dis-
	      play problems may	result,	such as	long lines being split in  the
	      wrong place.

       -R or --RAW-CONTROL-CHARS
	      Like  -r,	 but  only ANSI	"color"	escape sequences are output in
	      "raw" form.  Unlike -r, the screen appearance is maintained cor-
	      rectly  in  most	cases.	 ANSI  "color"	escape	sequences  are
	      sequences	of the form:

		   ESC [ ... m

	      where the	"..." is zero or more color  specification  characters
	      For  the	purpose	 of  keeping  track of screen appearance, ANSI
	      color escape sequences are assumed to not	move the cursor.   You
	      can  make	less think that	characters other than "m" can end ANSI
	      color escape  sequences  by  setting  the	 environment  variable
	      LESSANSIENDCHARS to the list of characters which can end a color
	      escape sequence.	And you	can make less  think  that  characters
	      other  than the standard ones may	appear between the ESC and the
	      m	by setting the environment variable  LESSANSIMIDCHARS  to  the
	      list of characters which can appear.

       -s or --squeeze-blank-lines
	      Causes  consecutive  blank  lines	 to  be	squeezed into a	single
	      blank line.  This	is useful when viewing nroff output.

       -S or --chop-long-lines
	      Causes lines longer than the screen width	to be  chopped	(trun-
	      cated) rather than wrapped.  That	is, the	portion	of a long line
	      that does	not fit	in the screen width is not shown.  The default
	      is  to  wrap  long  lines; that is, display the remainder	on the
	      next line.

       -ttag or	--tag=tag
	      The -t option, followed immediately by a TAG, will edit the file
	      containing  that tag.  For this to work, tag information must be
	      available; for example, there may	 be  a	file  in  the  current
	      directory	called "tags", which was previously built by ctags (1)
	      or an equivalent command.	 If the	environment variable LESSGLOB-
	      ALTAGS  is set, it is taken to be	the name of a command compati-
	      ble with global (1), and that command is executed	 to  find  the
	      tag.  (See http://www.gnu.org/software/global/global.html).  The
	      -t option	may also be specified from within less	(using	the  -
	      command)	as a way of examining a	new file.  The command ":t" is
	      equivalent to specifying -t from within less.

       -Ttagsfile or --tag-file=tagsfile
	      Specifies	a tags file to be used instead of "tags".

       -u or --underline-special
	      Causes backspaces	and carriage returns to	be treated  as	print-
	      able  characters;	 that  is,  they are sent to the terminal when
	      they appear in the input.

       -U or --UNDERLINE-SPECIAL
	      Causes backspaces, tabs, carriage	returns	and "formatting	 char-
	      acters" (as defined by Unicode) to be treated as control charac-
	      ters; that is, they are handled as specified by the -r option.

	      By default, if neither -u	nor  -U	 is  given,  backspaces	 which
	      appear  adjacent	to  an	underscore  character are treated spe-
	      cially: the underlined text is displayed	using  the  terminal's
	      hardware	underlining capability.	 Also, backspaces which	appear
	      between two identical  characters	 are  treated  specially:  the
	      overstruck  text	is printed using the terminal's	hardware bold-
	      face capability.	Other backspaces are deleted, along  with  the
	      preceding	character.  Carriage returns immediately followed by a
	      newline are deleted.  Other  carriage  returns  are  handled  as
	      specified	 by the	-r option.  Text which is overstruck or	under-
	      lined can	be searched for	if neither -u nor -U is	in effect.

       -V or --version
	      Displays the version number of less.

       -w or --hilite-unread
	      Temporarily highlights the first	"new"  line  after  a  forward
	      movement of a full page.	The first "new"	line is	the line imme-
	      diately following	the line  previously  at  the  bottom  of  the
	      screen.  Also highlights the target line after a g or p command.
	      The highlight is removed at the next command which causes	 move-
	      ment.   The  entire line is highlighted, unless the -J option is
	      in effect, in which case only the	status column is highlighted.

       -W or --HILITE-UNREAD
	      Like -w, but temporarily highlights the first new	line after any
	      forward movement command larger than one line.

       -xn,... or --tabs=n,...
	      Sets  tab	 stops.	 If only one n is specified, tab stops are set
	      at multiples of n.  If multiple values separated by  commas  are
	      specified,  tab  stops are set at	those positions, and then con-
	      tinue with the same spacing  as  the  last  two.	 For  example,
	      -x9,17  will  set	 tabs  at  positions  9, 17, 25, 33, etc.  The
	      default for n is 8.

       -X or --no-init
	      Disables sending the termcap initialization and deinitialization
	      strings  to  the	terminal.   This is sometimes desirable	if the
	      deinitialization string does something unnecessary, like	clear-
	      ing the screen.

       -yn or --max-forw-scroll=n
	      Specifies	a maximum number of lines to scroll forward.  If it is
	      necessary	to scroll forward more than n  lines,  the  screen  is
	      repainted	 instead.   The	-c or -C option	may be used to repaint
	      from the top of the screen if desired.  By default, any  forward
	      movement causes scrolling.

       -zn or --window=n or -n
	      Changes  the  default  scrolling	window	size  to n lines.  The
	      default is one screenful.	 The z and w commands can also be used
	      to  change the window size.  The "z" may be omitted for compati-
	      bility with some versions	of more.  If the number	n is negative,
	      it  indicates  n	lines  less than the current screen size.  For
	      example, if the screen is	24 lines, -z-4 sets the	scrolling win-
	      dow  to  20  lines.   If	the screen is resized to 40 lines, the
	      scrolling	window automatically changes to	36 lines.

       -"cc or --quotes=cc
	      Changes the filename quoting character.  This may	 be  necessary
	      if  you are trying to name a file	which contains both spaces and
	      quote characters.	 Followed by a single character, this  changes
	      the  quote  character to that character.	Filenames containing a
	      space should then	be surrounded by that character	rather than by
	      double  quotes.	Followed  by  two characters, changes the open
	      quote to the first character, and	the close quote	to the	second
	      character.  Filenames containing a space should then be preceded
	      by the open quote	character and  followed	 by  the  close	 quote
	      character.   Note	 that  even  after  the	 quote	characters are
	      changed, this option remains -" (a dash  followed	 by  a	double
	      quote).

       -~ or --tilde
	      Normally lines after end of file are displayed as	a single tilde
	      (~).  This option	causes lines after end of file to be displayed
	      as blank lines.

       -# or --shift
	      Specifies	the default number of positions	to scroll horizontally
	      in the RIGHTARROW	and LEFTARROW commands.	 If the	number	speci-
	      fied  is	zero,  it  sets	the default number of positions	to one
	      half of the screen width.	 Alternately, the number may be	speci-
	      fied  as	a fraction of the width	of the screen, starting	with a
	      decimal point: .5	is half	of  the	 screen	 width,	 .3  is	 three
	      tenths  of the screen width, and so on.  If the number is	speci-
	      fied as a	fraction, the actual number  of	 scroll	 positions  is
	      recalculated  if	the  terminal  window  is resized, so that the
	      actual scroll remains at the specified fraction  of  the	screen
	      width.

       --follow-name
	      Normally,	 if  the  input	 file is renamed while an F command is
	      executing, less will continue to display	the  contents  of  the
	      original	file  despite  its  name  change.  If --follow-name is
	      specified, during	an F command less will periodically attempt to
	      reopen the file by name.	If the reopen succeeds and the file is
	      a	different file from the	original (which	means that a new  file
	      has  been	 created  with	the  same  name	 as  the original (now
	      renamed) file), less will	display	the contents of	that new file.

       --no-keypad
	      Disables sending the keypad initialization and  deinitialization
	      strings to the terminal.	This is	sometimes useful if the	keypad
	      strings make the numeric keypad behave in	an undesirable manner.

       --use-backslash
	      This option changes the interpretations of options which	follow
	      this one.	 After the --use-backslash option, any backslash in an
	      option string is removed and the following  character  is	 taken
	      literally.   This	 allows	a dollar sign to be included in	option
	      strings.

       --rscroll
	      This option changes the character	used to	mark truncated	lines.
	      It may begin with	a two-character	attribute indicator like LESS-
	      BINFMT does.  If there is	no attribute  indicator,  standout  is
	      used.  If	set to "-", truncated lines are	not marked.

       --     A	 command  line	argument of "--" marks the end of option argu-
	      ments.  Any arguments following this are	interpreted  as	 file-
	      names.  This can be useful when viewing a	file whose name	begins
	      with a "-" or "+".

       +      If a command line	option begins with +, the  remainder  of  that
	      option  is taken to be an	initial	command	to less.  For example,
	      +G tells less to start at	the end	of the file  rather  than  the
	      beginning,  and  +/xyz tells it to start at the first occurrence
	      of "xyz" in the file.  As	a special case,	 +<number>  acts  like
	      +<number>g; that is, it starts the display at the	specified line
	      number (however, see the caveat under the	 "g"  command  above).
	      If  the  option  starts  with ++,	the initial command applies to
	      every file being viewed, not just	the first one.	The +  command
	      described	previously may also be used to set (or change) an ini-
	      tial command for every file.

LINE EDITING
       When entering command line at the bottom	of the screen (for example,  a
       filename	for the	:e command, or the pattern for a search	command), cer-
       tain keys can be	used to	manipulate the command	line.	Most  commands
       have  an	alternate form in [ brackets ] which can be used if a key does
       not exist on a particular keyboard.  (Note  that	 the  forms  beginning
       with  ESC do not	work in	some MS-DOS and	Windows	systems	because	ESC is
       the line	erase character.)  Any of these	special	keys  may  be  entered
       literally  by  preceding	 it with the "literal" character, either ^V or
       ^A.  A backslash	itself may also	be entered literally by	 entering  two
       backslashes.

       LEFTARROW [ ESC-h ]
	      Move the cursor one space	to the left.

       RIGHTARROW [ ESC-l ]
	      Move the cursor one space	to the right.

       ^LEFTARROW [ ESC-b or ESC-LEFTARROW ]
	      (That  is, CONTROL and LEFTARROW simultaneously.)	 Move the cur-
	      sor one word to the left.

       ^RIGHTARROW [ ESC-w or ESC-RIGHTARROW ]
	      (That is,	CONTROL	and RIGHTARROW simultaneously.)	 Move the cur-
	      sor one word to the right.

       HOME [ ESC-0 ]
	      Move the cursor to the beginning of the line.

       END [ ESC-$ ]
	      Move the cursor to the end of the	line.

       BACKSPACE
	      Delete  the  character  to the left of the cursor, or cancel the
	      command if the command line is empty.

       DELETE or [ ESC-x ]
	      Delete the character under the cursor.

       ^BACKSPACE [ ESC-BACKSPACE ]
	      (That is,	CONTROL	and  BACKSPACE	simultaneously.)   Delete  the
	      word to the left of the cursor.

       ^DELETE [ ESC-X or ESC-DELETE ]
	      (That  is,  CONTROL and DELETE simultaneously.)  Delete the word
	      under the	cursor.

       UPARROW [ ESC-k ]
	      Retrieve the previous command line.  If  you  first  enter  some
	      text  and	then press UPARROW, it will retrieve the previous com-
	      mand which begins	with that text.

       DOWNARROW [ ESC-j ]
	      Retrieve the next	command	line.  If you first  enter  some  text
	      and  then	 press	DOWNARROW,  it	will retrieve the next command
	      which begins with	that text.

       TAB    Complete the partial filename to the left	of the cursor.	If  it
	      matches  more than one filename, the first match is entered into
	      the command line.	 Repeated  TABs	 will  cycle  thru  the	 other
	      matching filenames.  If the completed filename is	a directory, a
	      "/" is appended to the filename.	(On MS-DOS systems, a  "\"  is
	      appended.)   The	environment variable LESSSEPARATOR can be used
	      to specify a different character to append to a directory	name.

       BACKTAB [ ESC-TAB ]
	      Like, TAB, but cycles in the reverse direction thru the matching
	      filenames.

       ^L     Complete	the partial filename to	the left of the	cursor.	 If it
	      matches more than	one filename, all matches are entered into the
	      command line (if they fit).

       ^U (Unix	and OS/2) or ESC (MS-DOS)
	      Delete  the  entire  command  line, or cancel the	command	if the
	      command line is empty.  If you have changed your line-kill char-
	      acter in Unix to something other than ^U,	that character is used
	      instead of ^U.

       ^G     Delete the entire	command	line and return	to the main prompt.

KEY BINDINGS
       You may define your own less commands by	using the program lesskey  (1)
       to  create  a  lesskey file.  This file specifies a set of command keys
       and an action associated	with each key.	You may	also  use  lesskey  to
       change the line-editing keys (see LINE EDITING),	and to set environment
       variables.  If the environment variable LESSKEY is set, less uses  that
       as  the	name of	the lesskey file.  Otherwise, less looks in a standard
       place for the lesskey file: On Unix systems, less looks for  a  lesskey
       file  called  "$HOME/.less".  On	MS-DOS and Windows systems, less looks
       for a lesskey file called "$HOME/_less",	and if it is not found	there,
       then looks for a	lesskey	file called "_less" in any directory specified
       in the PATH environment variable.  On OS/2 systems, less	 looks	for  a
       lesskey	file  called  "$HOME/less.ini",	 and  if it is not found, then
       looks for a lesskey file	called "less.ini" in any  directory  specified
       in the INIT environment variable, and if	it not found there, then looks
       for a lesskey file called "less.ini" in any directory specified in  the
       PATH  environment  variable.   See  the	lesskey	 manual	 page for more
       details.

       A system-wide lesskey file may also be set up to	provide	key  bindings.
       If a key	is defined in both a local lesskey file	and in the system-wide
       file, key bindings in the local file take precedence over those in  the
       system-wide  file.   If the environment variable	LESSKEY_SYSTEM is set,
       less uses that as the name of the system-wide lesskey file.  Otherwise,
       less  looks  in	a  standard place for the system-wide lesskey file: On
       Unix systems, the system-wide lesskey file  is  /usr/local/etc/sysless.
       (However,  if  less  was	 built with a different	sysconf	directory than
       /usr/local/etc, that directory is where the sysless file	is found.)  On
       MS-DOS  and  Windows  systems, the system-wide lesskey file is c:\_sys-
       less.  On OS/2 systems, the system-wide lesskey file is c:\sysless.ini.

INPUT PREPROCESSOR
       You may define an "input	preprocessor" for less.	 Before	less  opens  a
       file, it	first gives your input preprocessor a chance to	modify the way
       the contents of the file	are displayed.	An input preprocessor is  sim-
       ply  an executable program (or shell script), which writes the contents
       of the file to a	different file,	called the replacement file.  The con-
       tents  of  the replacement file are then	displayed in place of the con-
       tents of	the original file.  However, it	will appear to the user	as  if
       the  original  file  is opened; that is,	less will display the original
       filename	as the name of the current file.

       An input	preprocessor receives one command line argument, the  original
       filename,  as  entered  by  the user.  It should	create the replacement
       file, and when finished,	print the name of the replacement file to  its
       standard	 output.  If the input preprocessor does not output a replace-
       ment filename, less uses	the original file, as normal.  The input  pre-
       processor  is  not  called  when	 viewing standard input.  To set up an
       input preprocessor, set the LESSOPEN environment	variable to a  command
       line  which  will  invoke  your	input preprocessor.  This command line
       should include one  occurrence  of  the	string	"%s",  which  will  be
       replaced	 by  the  filename  when  the  input  preprocessor  command is
       invoked.

       When less closes	a file opened in such a	way, it	will call another pro-
       gram,  called  the  input  postprocessor, which may perform any desired
       clean-up	action (such as	 deleting  the	replacement  file  created  by
       LESSOPEN).  This	program	receives two command line arguments, the orig-
       inal filename as	entered	by the user, and the name of  the  replacement
       file.   To set up an input postprocessor, set the LESSCLOSE environment
       variable	to a command line which	will invoke your input	postprocessor.
       It  may	include	 two  occurrences  of  the  string  "%s"; the first is
       replaced	with the original name of the file and	the  second  with  the
       name of the replacement file, which was output by LESSOPEN.

       For  example, on	many Unix systems, these two scripts will allow	you to
       keep files in compressed	format,	but still let less view	them directly:

       lessopen.sh:
	    #! /bin/sh
	    case "$1" in
	    *.Z) uncompress -c $1  >/tmp/less.$$  2>/dev/null
		 if [ -s /tmp/less.$$ ]; then
		      echo /tmp/less.$$
		 else
		      rm -f /tmp/less.$$
		 fi
		 ;;
	    esac

       lessclose.sh:
	    #! /bin/sh
	    rm $2

       To use these scripts, put them both where they can be executed and  set
       LESSOPEN="lessopen.sh %s",  and	LESSCLOSE="lessclose.sh	%s %s".	  More
       complex LESSOPEN	and LESSCLOSE scripts may be written to	 accept	 other
       types of	compressed files, and so on.

       It  is  also  possible to set up	an input preprocessor to pipe the file
       data directly to	less, rather than putting the data into	a  replacement
       file.  This avoids the need to decompress the entire file before	start-
       ing to view it.	An input preprocessor that works this way is called an
       input  pipe.   An input pipe, instead of	writing	the name of a replace-
       ment file on its	standard output, writes	the  entire  contents  of  the
       replacement  file  on  its standard output.  If the input pipe does not
       write any characters on its standard output, then there is no  replace-
       ment  file and less uses	the original file, as normal.  To use an input
       pipe, make the first character in the LESSOPEN environment  variable  a
       vertical	 bar  (|)  to  signify that the	input preprocessor is an input
       pipe.  As with non-pipe input preprocessors, the	 command  string  must
       contain	one  occurrence	 of %s,	which is replaced with the filename of
       the input file.

       For example, on many Unix systems, this script will work	like the  pre-
       vious example scripts:

       lesspipe.sh:
	    #! /bin/sh
	    case "$1" in
	    *.Z) uncompress -c $1  2>/dev/null
	    *)	 exit 1
		 ;;
	    esac
	    exit $?

       To  use	this  script,  put  it	where  it  can	be  executed  and  set
       LESSOPEN="|lesspipe.sh %s".

       Note that a preprocessor	cannot output an empty	file,  since  that  is
       interpreted  as	meaning	there is no replacement, and the original file
       is used.	 To avoid this,	if LESSOPEN starts with	two vertical bars, the
       exit  status  of	 the script becomes meaningful.	 If the	exit status is
       zero, the output	is considered to be replacement	text, even  if	it  is
       empty.	If  the	 exit status is	nonzero, any output is ignored and the
       original	file is	used.  For compatibility  with	previous  versions  of
       less, if	LESSOPEN starts	with only one vertical bar, the	exit status of
       the preprocessor	is ignored.

       When an input pipe is used, a LESSCLOSE postprocessor can be used,  but
       it is usually not necessary since there is no replacement file to clean
       up.  In this case, the replacement file name passed  to	the  LESSCLOSE
       postprocessor is	"-".

       For  compatibility with previous	versions of less, the input preproces-
       sor or pipe is not used if less is viewing standard input.  However, if
       the  first  character of	LESSOPEN is a dash (-),	the input preprocessor
       is used on standard input as well as other files.  In  this  case,  the
       dash  is	 not  considered  to  be part of the preprocessor command.  If
       standard	input is being viewed, the input preprocessor is passed	a file
       name  consisting	of a single dash.  Similarly, if the first two charac-
       ters of LESSOPEN	are vertical bar and dash (|-) or  two	vertical  bars
       and  a  dash (||-), the input pipe is used on standard input as well as
       other files.  Again, in this case the dash is not considered to be part
       of the input pipe command.

NATIONAL CHARACTER SETS
       There are three types of	characters in the input	file:

       normal characters
	      can be displayed directly	to the screen.

       control characters
	      should  not  be displayed	directly, but are expected to be found
	      in ordinary text files (such as backspace	and tab).

       binary characters
	      should not be displayed directly and  are	 not  expected	to  be
	      found in text files.

       A "character set" is simply a description of which characters are to be
       considered normal, control, and binary.	 The  LESSCHARSET  environment
       variable	 may  be  used to select a character set.  Possible values for
       LESSCHARSET are:

       ascii  BS, TAB, NL, CR, and formfeed are	control	characters, all	 chars
	      with  values  between  32	and 126	are normal, and	all others are
	      binary.

       iso8859
	      Selects an ISO 8859 character set.  This is the same  as	ASCII,
	      except  characters  between  160	and  255 are treated as	normal
	      characters.

       latin1 Same as iso8859.

       latin9 Same as iso8859.

       dos    Selects a	character set appropriate for MS-DOS.

       ebcdic Selects an EBCDIC	character set.

       IBM-1047
	      Selects an EBCDIC	character set used by  OS/390  Unix  Services.
	      This  is the EBCDIC analogue of latin1.  You get similar results
	      by setting either	LESSCHARSET=IBM-1047 or	LC_CTYPE=en_US in your
	      environment.

       koi8-r Selects a	Russian	character set.

       next   Selects a	character set appropriate for NeXT computers.

       utf-8  Selects  the  UTF-8  encoding  of	 the  ISO 10646	character set.
	      UTF-8 is special in that it supports  multi-byte	characters  in
	      the  input  file.	  It  is  the only character set that supports
	      multi-byte characters.

       windows
	      Selects a	character set appropriate for  Microsoft  Windows  (cp
	      1251).

       In  rare	cases, it may be desired to tailor less	to use a character set
       other than the ones definable by	LESSCHARSET.  In this case, the	 envi-
       ronment variable	LESSCHARDEF can	be used	to define a character set.  It
       should be set to	a string where each character in the string represents
       one  character  in  the character set.  The character "." is used for a
       normal character, "c" for control, and "b" for binary.  A decimal  num-
       ber  may	 be  used  for	repetition.  For example, "bccc4b." would mean
       character 0 is binary, 1, 2 and 3 are  control,	4,  5,	6  and	7  are
       binary, and 8 is	normal.	 All characters	after the last are taken to be
       the same	as the last, so	characters 9  through  255  would  be  normal.
       (This  is an example, and does not necessarily represent	any real char-
       acter set.)

       This table shows	the value of LESSCHARDEF which is equivalent  to  each
       of the possible values for LESSCHARSET:

	    ascii     8bcccbcc18b95.b
	    dos	      8bcccbcc12bc5b95.b.
	    ebcdic    5bc6bcc7bcc41b.9b7.9b5.b..8b6.10b6.b9.7b
		      9.8b8.17b3.3b9.7b9.8b8.6b10.b.b.b.
	    IBM-1047  4cbcbc3b9cbccbccbb4c6bcc5b3cbbc4bc4bccbc
		      191.b
	    iso8859   8bcccbcc18b95.33b.
	    koi8-r    8bcccbcc18b95.b128.
	    latin1    8bcccbcc18b95.33b.
	    next      8bcccbcc18b95.bb125.bb

       If  neither  LESSCHARSET	nor LESSCHARDEF	is set,	but any	of the strings
       "UTF-8",	"UTF8",	"utf-8"	or "utf8" is found in the LC_ALL, LC_CTYPE  or
       LANG environment	variables, then	the default character set is utf-8.

       If  that	 string	 is  not found,	but your system	supports the setlocale
       interface, less will use	setlocale  to  determine  the  character  set.
       setlocale  is  controlled  by  setting the LANG or LC_CTYPE environment
       variables.

       Finally,	if the setlocale interface is also not available, the  default
       character set is	latin1.

       Control	and  binary  characters	 are  displayed	 in  standout (reverse
       video).	Each such character is displayed in caret notation if possible
       (e.g.  ^A for control-A).  Caret	notation is used only if inverting the
       0100 bit	results	in a normal printable character.  Otherwise, the char-
       acter  is displayed as a	hex number in angle brackets.  This format can
       be changed by setting the LESSBINFMT environment	variable.   LESSBINFMT
       may begin with a	"*" and	one character to select	the display attribute:
       "*k" is blinking, "*d" is bold, "*u" is underlined, "*s"	 is  standout,
       and  "*n"  is  normal.  If LESSBINFMT does not begin with a "*",	normal
       attribute is assumed.  The remainder of LESSBINFMT is  a	 string	 which
       may  include one	printf-style escape sequence (a	% followed by x, X, o,
       d, etc.).  For example, if LESSBINFMT is	 "*u[%x]",  binary  characters
       are  displayed  in  underlined hexadecimal surrounded by	brackets.  The
       default if no LESSBINFMT	is  specified  is  "*s<%02X>".	 Warning:  the
       result  of  expanding the character via LESSBINFMT must be less than 31
       characters.

       When the	character set is utf-8,	the LESSUTFBINFMT environment variable
       acts similarly to LESSBINFMT but	it applies to Unicode code points that
       were successfully decoded but are unsuitable for	display	 (e.g.,	 unas-
       signed  code  points).	Its  default  value is "<U+%04lX>".  Note that
       LESSUTFBINFMT and LESSBINFMT  share  their  display  attribute  setting
       ("*x")  so specifying one will affect both; LESSUTFBINFMT is read after
       LESSBINFMT so its setting, if any,  will	 have  priority.   Problematic
       octets  in  a  UTF-8  file (octets of a truncated sequence, octets of a
       complete	but non-shortest form  sequence,  illegal  octets,  and	 stray
       trailing	 octets)  are displayed	individually using LESSBINFMT so as to
       facilitate diagnostic of	how the	UTF-8 file is ill-formed.

PROMPTS
       The -P option allows you	to tailor the prompt to	your preference.   The
       string  given  to  the  -P option replaces the specified	prompt string.
       Certain characters in the string	are interpreted	specially.  The	prompt
       mechanism  is  rather complicated to provide flexibility, but the ordi-
       nary user need not understand the details of constructing  personalized
       prompt strings.

       A  percent sign followed	by a single character is expanded according to
       what the	following character is:

       %bX    Replaced by the byte offset into the current input file.	The  b
	      is followed by a single character	(shown as X above) which spec-
	      ifies the	line whose byte	offset is to be	used.  If the  charac-
	      ter  is a	"t", the byte offset of	the top	line in	the display is
	      used, an "m" means use the middle	line, a	"b" means use the bot-
	      tom  line,  a "B"	means use the line just	after the bottom line,
	      and a "j"	means use the "target" line, as	specified  by  the  -j
	      option.

       %B     Replaced by the size of the current input	file.

       %c     Replaced by the column number of the text	appearing in the first
	      column of	the screen.

       %dX    Replaced by the page number of a line in the  input  file.   The
	      line to be used is determined by the X, as with the %b option.

       %D     Replaced	by  the	 number	of pages in the	input file, or equiva-
	      lently, the page number of the last line in the input file.

       %E     Replaced by the name of the editor (from the VISUAL  environment
	      variable,	 or  the  EDITOR environment variable if VISUAL	is not
	      defined).	 See the discussion of the LESSEDIT feature below.

       %f     Replaced by the name of the current input	file.

       %F     Replaced by the last component of	the name of the	current	 input
	      file.

       %i     Replaced	by  the	index of the current file in the list of input
	      files.

       %lX    Replaced by the line number of a line in the  input  file.   The
	      line to be used is determined by the X, as with the %b option.

       %L     Replaced by the line number of the last line in the input	file.

       %m     Replaced by the total number of input files.

       %pX    Replaced	by  the	 percent into the current input	file, based on
	      byte offsets.  The line used is determined by the	X as with  the
	      %b option.

       %PX    Replaced	by  the	 percent into the current input	file, based on
	      line numbers.  The line used is determined by the	X as with  the
	      %b option.

       %s     Same as %B.

       %t     Causes  any  trailing spaces to be removed.  Usually used	at the
	      end of the string, but may appear	anywhere.

       %T     Normally expands to the word "file".  However if	viewing	 files
	      via  a  tags  list  using	 the -t	option,	it expands to the word
	      "tag".

       %x     Replaced by the name of the next input file in the list.

       If any item is unknown (for example, the	file size if input is a	pipe),
       a question mark is printed instead.

       The  format  of	the  prompt string can be changed depending on certain
       conditions.  A question mark followed by	a single character  acts  like
       an  "IF":  depending  on	the following character, a condition is	evalu-
       ated.  If the condition is true,	any characters following the  question
       mark  and  condition  character,	 up  to	 a period, are included	in the
       prompt.	If the condition is false, such	characters are	not  included.
       A  colon	appearing between the question mark and	the period can be used
       to establish an "ELSE": any characters between the colon	and the	period
       are  included  in  the string if	and only if the	IF condition is	false.
       Condition characters (which follow a question mark) may be:

       ?a     True if any characters have been included	in the prompt so far.

       ?bX    True if the byte offset of the specified line is known.

       ?B     True if the size of current input	file is	known.

       ?c     True if the text is horizontally shifted (%c is not zero).

       ?dX    True if the page number of the specified line is known.

       ?e     True if at end-of-file.

       ?f     True if there is an input	filename (that is, if input is	not  a
	      pipe).

       ?lX    True if the line number of the specified line is known.

       ?L     True if the line number of the last line in the file is known.

       ?m     True if there is more than one input file.

       ?n     True if this is the first	prompt in a new	input file.

       ?pX    True  if	the percent into the current input file, based on byte
	      offsets, of the specified	line is	known.

       ?PX    True if the percent into the current input file, based  on  line
	      numbers, of the specified	line is	known.

       ?s     Same as "?B".

       ?x     True  if	there  is  a  next input file (that is,	if the current
	      input file is not	the last one).

       Any characters other than  the  special	ones  (question	 mark,	colon,
       period,	percent,  and  backslash) become literally part	of the prompt.
       Any of the special characters may be included in	the  prompt  literally
       by preceding it with a backslash.

       Some examples:

       ?f%f:Standard input.

       This  prompt prints the filename, if known; otherwise the string	"Stan-
       dard input".

       ?f%f .?ltLine %lt:?pt%pt\%:?btByte %bt:-...

       This prompt would print the filename, if	known.	The filename  is  fol-
       lowed  by  the  line  number, if	known, otherwise the percent if	known,
       otherwise the byte offset if known.   Otherwise,	 a  dash  is  printed.
       Notice  how  each  question  mark  has a	matching period, and how the %
       after the %pt is	included literally by escaping it with a backslash.

       ?n?f%f .?m(%T %i	of %m) ..?e(END) ?x- Next\: %x..%t";

       This prints the filename	if this	is the first prompt in	a  file,  fol-
       lowed  by  the  "file  N	 of N" message if there	is more	than one input
       file.  Then, if we are at end-of-file, the string  "(END)"  is  printed
       followed	 by  the name of the next file,	if there is one.  Finally, any
       trailing	spaces are truncated.  This is the default prompt.  For	refer-
       ence,  here  are	 the  defaults	for  the  other	two prompts (-m	and -M
       respectively).  Each is broken into  two	 lines	here  for  readability
       only.

       ?n?f%f .?m(%T %i	of %m) ..?e(END) ?x- Next\: %x.:
	    ?pB%pB\%:byte %bB?s/%s...%t

       ?f%f .?n?m(%T %i	of %m) ..?ltlines %lt-%lb?L/%L.	:
	    byte %bB?s/%s. .?e(END) ?x-	Next\: %x.:?pB%pB\%..%t

       And here	is the default message produced	by the = command:

       ?f%f .?m(%T %i of %m) .?ltlines %lt-%lb?L/%L. .
	    byte %bB?s/%s. ?e(END) :?pB%pB\%..%t

       The  prompt expansion features are also used for	another	purpose: if an
       environment variable LESSEDIT is	defined, it is used as the command  to
       be  executed  when  the	v  command is invoked.	The LESSEDIT string is
       expanded	in the same way	as the prompt strings.	The default value  for
       LESSEDIT	is:

	    %E ?lm+%lm.	%f

       Note that this expands to the editor name, followed by a	+ and the line
       number, followed	by the file name.  If your editor does not accept  the
       "+linenumber"  syntax,  or  has other differences in invocation syntax,
       the LESSEDIT variable can be changed to modify this default.

SECURITY
       When the	environment variable LESSSECURE	is set to 1, less  runs	 in  a
       "secure"	mode.  This means these	features are disabled:

	      !	     the shell command

	      |	     the pipe command

	      :e     the examine command.

	      v	     the editing command

	      s	 -o  log files

	      -k     use of lesskey files

	      -t     use of tags files

		     metacharacters in filenames, such as *

		     filename completion (TAB, ^L)

       Less can	also be	compiled to be permanently in "secure" mode.

COMPATIBILITY WITH MORE
       If the environment variable LESS_IS_MORE	is set to 1, or	if the program
       is invoked via a	file link named	"more",	less behaves (mostly) in  con-
       formance	 with  the  POSIX "more" command specification.	 In this mode,
       less behaves differently	in these ways:

       The -e option works differently.	 If the	-e option  is  not  set,  less
       behaves	as  if	the -e option were set.	 If the	-e option is set, less
       behaves as if the -E option were	set.

       The -m option works differently.	 If the	-m  option  is	not  set,  the
       medium  prompt  is used,	and it is prefixed with	the string "--More--".
       If the -m option	is set,	the short prompt is used.

       The -n option acts like the -z option.  The normal behavior of  the  -n
       option is unavailable in	this mode.

       The  parameter  to  the	-p option is taken to be a less	command	rather
       than a search pattern.

       The LESS	environment variable is	 ignored,  and	the  MORE  environment
       variable	is used	in its place.

ENVIRONMENT VARIABLES
       Environment variables may be specified either in	the system environment
       as usual, or in a lesskey  (1)  file.   If  environment	variables  are
       defined	in  more  than one place, variables defined in a local lesskey
       file take precedence over variables defined in the system  environment,
       which take precedence over variables defined in the system-wide lesskey
       file.

       COLUMNS
	      Sets the number of columns on the	screen.	 Takes precedence over
	      the  number  of columns specified	by the TERM variable.  (But if
	      you  have	 a  windowing  system  which  supports	TIOCGWINSZ  or
	      WIOCGETD,	 the  window  system's	idea  of the screen size takes
	      precedence over the LINES	and COLUMNS environment	variables.)

       EDITOR The name of the editor (used for the v command).

       HOME   Name of the user's home directory	(used to find a	 lesskey  file
	      on Unix and OS/2 systems).

       HOMEDRIVE, HOMEPATH
	      Concatenation  of	 the  HOMEDRIVE	and HOMEPATH environment vari-
	      ables is the name	of the user's home directory if	the HOME vari-
	      able is not set (only in the Windows version).

       INIT   Name  of	the user's init	directory (used	to find	a lesskey file
	      on OS/2 systems).

       LANG   Language for determining the character set.

       LC_CTYPE
	      Language for determining the character set.

       LESS   Options which are	passed to less automatically.

       LESSANSIENDCHARS
	      Characters which may end an ANSI color escape sequence  (default
	      "m").

       LESSANSIMIDCHARS
	      Characters  which	 may  appear between the ESC character and the
	      end  character  in  an  ANSI  color  escape  sequence   (default
	      "0123456789:;[?!"'#%()*+ ".

       LESSBINFMT
	      Format for displaying non-printable, non-control characters.

       LESSCHARDEF
	      Defines a	character set.

       LESSCHARSET
	      Selects a	predefined character set.

       LESSCLOSE
	      Command line to invoke the (optional) input-postprocessor.

       LESSECHO
	      Name of the lessecho program (default "lessecho").  The lessecho
	      program is needed	to expand metacharacters, such as * and	?,  in
	      filenames	on Unix	systems.

       LESSEDIT
	      Editor  prototype	 string	(used for the v	command).  See discus-
	      sion under PROMPTS.

       LESSGLOBALTAGS
	      Name of the command used by the -t option	to find	 global	 tags.
	      Normally should be set to	"global" if your system	has the	global
	      (1) command.  If not set,	global tags are	not used.

       LESSHISTFILE
	      Name of the history file used to remember	 search	 commands  and
	      shell  commands  between	invocations of less.  If set to	"-" or
	      "/dev/null", a  history  file  is	 not  used.   The  default  is
	      "$HOME/.lesshst"	on  Unix  systems, "$HOME/_lesshst" on DOS and
	      Windows systems, or "$HOME/lesshst.ini"  or  "$INIT/lesshst.ini"
	      on OS/2 systems.

       LESSHISTSIZE
	      The maximum number of commands to	save in	the history file.  The
	      default is 100.

       LESSKEY
	      Name of the default lesskey(1) file.

       LESSKEY_SYSTEM
	      Name of the default system-wide lesskey(1) file.

       LESSMETACHARS
	      List of characters which are considered "metacharacters" by  the
	      shell.

       LESSMETAESCAPE
	      Prefix  which  less will add before each metacharacter in	a com-
	      mand sent	to the shell.  If LESSMETAESCAPE is an	empty  string,
	      commands	containing  metacharacters  will  not be passed	to the
	      shell.

       LESSOPEN
	      Command line to invoke the (optional) input-preprocessor.

       LESSSECURE
	      Runs less	in "secure" mode.  See discussion under	SECURITY.

       LESSSEPARATOR
	      String to	be appended to a directory name	 in  filename  comple-
	      tion.

       LESSUTFBINFMT
	      Format for displaying non-printable Unicode code points.

       LESS_IS_MORE
	      Emulate the more (1) command.

       LINES  Sets  the	 number	of lines on the	screen.	 Takes precedence over
	      the number of lines specified by the TERM	variable.  (But	if you
	      have  a  windowing system	which supports TIOCGWINSZ or WIOCGETD,
	      the window system's idea of the  screen  size  takes  precedence
	      over the LINES and COLUMNS environment variables.)

       MORE   Options  which  are passed to less automatically when running in
	      more compatible mode.

       PATH   User's search path (used to find a lesskey file  on  MS-DOS  and
	      OS/2 systems).

       SHELL  The  shell  used	to execute the ! command, as well as to	expand
	      filenames.

       TERM   The type of terminal on which less is being run.

       VISUAL The name of the editor (used for the v command).

SEE ALSO
       lesskey(1)

COPYRIGHT
       Copyright (C) 1984-2017	Mark Nudelman

       less is part of the GNU project and is free software.  You  can	redis-
       tribute	it and/or modify it under the terms of either (1) the GNU Gen-
       eral Public License as published	by the Free  Software  Foundation;  or
       (2) the Less License.  See the file README in the less distribution for
       more details regarding redistribution.  You should have received	a copy
       of  the	GNU General Public License along with the source for less; see
       the file	COPYING.  If not, write	to the Free  Software  Foundation,  59
       Temple  Place, Suite 330, Boston, MA  02111-1307, USA.  You should also
       have received a copy of the Less	License; see the file LICENSE.

       less is distributed in the hope that it will be useful, but WITHOUT ANY
       WARRANTY;  without even the implied warranty of MERCHANTABILITY or FIT-
       NESS FOR	A PARTICULAR PURPOSE.  See the GNU General Public License  for
       more details.

AUTHOR
       Mark Nudelman
       Send bug	reports	or comments to <bug-less@gnu.org>
       See http://www.greenwoodsoftware.com/less/bugs.html for the latest list
       of known	bugs in	less.
       For more	information, see the less homepage at
       http://www.greenwoodsoftware.com/less.

			   Version 530:	05 Dec 2017		       LESS(1)

NAME | SYNOPSIS | DESCRIPTION | COMMANDS | OPTIONS | LINE EDITING | KEY BINDINGS | INPUT PREPROCESSOR | NATIONAL CHARACTER SETS | PROMPTS | SECURITY | COMPATIBILITY WITH MORE | ENVIRONMENT VARIABLES | SEE ALSO | COPYRIGHT | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=more&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help