Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MMAP(2)                   FreeBSD System Calls Manual                  MMAP(2)

NAME
     mmap -- allocate memory, or map files or devices into memory

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <sys/mman.h>

     void *
     mmap(void *addr, size_t len, int prot, int flags, int fd, off_t offset);

DESCRIPTION
     The mmap() system call causes the pages starting at addr and continuing
     for at most len bytes to be mapped from the object described by fd,
     starting at byte offset offset.  If len is not a multiple of the page-
     size, the mapped region may extend past the specified range.  Any such
     extension beyond the end of the mapped object will be zero-filled.

     If addr is non-zero, it is used as a hint to the system.  (As a conve-
     nience to the system, the actual address of the region may differ from
     the address supplied.)  If addr is zero, an address will be selected by
     the system.  The actual starting address of the region is returned.  A
     successful mmap deletes any previous mapping in the allocated address
     range.

     The protections (region accessibility) are specified in the prot argument
     by or'ing the following values:

     PROT_NONE   Pages may not be accessed.
     PROT_READ   Pages may be read.
     PROT_WRITE  Pages may be written.
     PROT_EXEC   Pages may be executed.

     The flags argument specifies the type of the mapped object, mapping
     options and whether modifications made to the mapped copy of the page are
     private to the process or are to be shared with other references.  Shar-
     ing, mapping type and options are specified in the flags argument by
     or'ing the following values:

     MAP_ANON          Map anonymous memory not associated with any specific
                       file.  The file descriptor used for creating MAP_ANON
                       must be -1.  The offset argument is ignored.

     MAP_FIXED         Do not permit the system to select a different address
                       than the one specified.  If the specified address can-
                       not be used, mmap() will fail.  If MAP_FIXED is speci-
                       fied, addr must be a multiple of the pagesize.  If a
                       MAP_FIXED request is successful, the mapping estab-
                       lished by mmap() replaces any previous mappings for the
                       process' pages in the range from addr to addr + len.
                       Use of this option is discouraged.

     MAP_HASSEMAPHORE  Notify the kernel that the region may contain sema-
                       phores and that special handling may be necessary.

     MAP_INHERIT       This flag never operated as advertised and is no longer
                       supported.  Please refer to minherit(2) for further
                       information.

     MAP_NOCORE        Region is not included in a core file.

     MAP_NOSYNC        Causes data dirtied via this VM map to be flushed to
                       physical media only when necessary (usually by the
                       pager) rather than gratuitously.  Typically this pre-
                       vents the update daemons from flushing pages dirtied
                       through such maps and thus allows efficient sharing of
                       memory across unassociated processes using a file-
                       backed shared memory map.  Without this option any VM
                       pages you dirty may be flushed to disk every so often
                       (every 30-60 seconds usually) which can create perfor-
                       mance problems if you do not need that to occur (such
                       as when you are using shared file-backed mmap regions
                       for IPC purposes).  Note that VM/file system coherency
                       is maintained whether you use MAP_NOSYNC or not.  This
                       option is not portable across UNIX platforms (yet),
                       though some may implement the same behavior by default.

                       WARNING!  Extending a file with ftruncate(2), thus cre-
                       ating a big hole, and then filling the hole by modify-
                       ing a shared mmap() can lead to severe file fragmenta-
                       tion.  In order to avoid such fragmentation you should
                       always pre-allocate the file's backing store by
                       write()ing zero's into the newly extended area prior to
                       modifying the area via your mmap().  The fragmentation
                       problem is especially sensitive to MAP_NOSYNC pages,
                       because pages may be flushed to disk in a totally ran-
                       dom order.

                       The same applies when using MAP_NOSYNC to implement a
                       file-based shared memory store.  It is recommended that
                       you create the backing store by write()ing zero's to
                       the backing file rather than ftruncate()ing it.  You
                       can test file fragmentation by observing the KB/t
                       (kilobytes per transfer) results from an ``iostat 1''
                       while reading a large file sequentially, e.g. using
                       ``dd if=filename of=/dev/null bs=32k''.

                       The fsync(2) system call will flush all dirty data and
                       metadata associated with a file, including dirty NOSYNC
                       VM data, to physical media.  The sync(8) command and
                       sync(2) system call generally do not flush dirty NOSYNC
                       VM data.  The msync(2) system call is obsolete since
                       BSD implements a coherent file system buffer cache.
                       However, it may be used to associate dirty VM pages
                       with file system buffers and thus cause them to be
                       flushed to physical media sooner rather than later.

     MAP_PRIVATE       Modifications are private.

     MAP_SHARED        Modifications are shared.

     MAP_STACK         MAP_STACK implies MAP_ANON, and offset of 0.  The fd
                       argument must be -1 and prot must include at least
                       PROT_READ and PROT_WRITE.  This option creates a memory
                       region that grows to at most len bytes in size, start-
                       ing from the stack top and growing down.  The stack top
                       is the starting address returned by the call, plus len
                       bytes.  The bottom of the stack at maximum growth is
                       the starting address returned by the call.

     The close(2) system call does not unmap pages, see munmap(2) for further
     information.

     The current design does not allow a process to specify the location of
     swap space.  In the future we may define an additional mapping type,
     MAP_SWAP, in which the file descriptor argument specifies a file or
     device to which swapping should be done.

RETURN VALUES
     Upon successful completion, mmap() returns a pointer to the mapped
     region.  Otherwise, a value of MAP_FAILED is returned and errno is set to
     indicate the error.

ERRORS
     The mmap() system call will fail if:

     [EACCES]           The flag PROT_READ was specified as part of the prot
                        argument and fd was not open for reading.  The flags
                        MAP_SHARED and PROT_WRITE were specified as part of
                        the flags and prot argument and fd was not open for
                        writing.

     [EBADF]            The fd argument is not a valid open file descriptor.

     [EINVAL]           MAP_FIXED was specified and the addr argument was not
                        page aligned, or part of the desired address space
                        resides out of the valid address space for a user
                        process.

     [EINVAL]           The len argument was negative.

     [EINVAL]           MAP_ANON was specified and the fd argument was not -1.

     [EINVAL]           MAP_ANON has not been specified and fd did not refer-
                        ence a regular or character special file.

     [EINVAL]           The offset argument was not page-aligned.  (See BUGS
                        below.)

     [ENOMEM]           MAP_FIXED was specified and the addr argument was not
                        available.  MAP_ANON was specified and insufficient
                        memory was available.  The system has reached the per-
                        process mmap limit specified in the vm.max_proc_mmap
                        sysctl.

SEE ALSO
     madvise(2), mincore(2), minherit(2), mlock(2), mprotect(2), msync(2),
     munlock(2), munmap(2), getpagesize(3), make.conf(5)

BUGS
     The len argument is limited to the maximum file size or available user-
     land address space.  Files may not be able to be made more than 1TB large
     on 32 bit systems due to file systems restrictions and bugs, but address
     space is far more restrictive.  Larger files may be possible on 64 bit
     systems.

     The previous documented limit of 2GB was a documentation bug.  That limit
     has not existed since FreeBSD 2.2.

     Note that an attempt to mmap() zero bytes has no effect and succeeds,
     while an attempt to munmap() zero bytes will return [EINVAL].

FreeBSD 6.2                    November 17, 2001                   FreeBSD 6.2

NAME | LIBRARY | SYNOPSIS | DESCRIPTION | RETURN VALUES | ERRORS | SEE ALSO | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mmap&sektion=2&manpath=FreeBSD+6.2-RELEASE>

home | help