Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
MMAP(2)                   FreeBSD System Calls Manual                  MMAP(2)

     mmap -- allocate memory, or map files or devices into memory

     Standard C Library (libc, -lc)

     #include <sys/types.h>
     #include <sys/mman.h>

     void *
     mmap(void *addr, size_t len, int prot, int flags, int fd, off_t offset);

     The mmap() function causes the pages starting at addr and continuing for
     at most len bytes to be mapped from the object described by fd, starting
     at byte offset offset.  If len is not a multiple of the pagesize, the
     mapped region may extend past the specified range.  Any such extension
     beyond the end of the mapped object will be zero-filled.

     If addr is non-zero, it is used as a hint to the system.  (As a conve-
     nience to the system, the actual address of the region may differ from
     the address supplied.)  If addr is zero, an address will be selected by
     the system.  The actual starting address of the region is returned.  A
     successful mmap deletes any previous mapping in the allocated address

     The protections (region accessibility) are specified in the prot argument
     by or'ing the following values:

     PROT_NONE   Pages may not be accessed.
     PROT_READ   Pages may be read.
     PROT_WRITE  Pages may be written.
     PROT_EXEC   Pages may be executed.

     The flags parameter specifies the type of the mapped object, mapping
     options and whether modifications made to the mapped copy of the page are
     private to the process or are to be shared with other references.  Shar-
     ing, mapping type and options are specified in the flags argument by
     or'ing the following values:

     MAP_ANON          Map anonymous memory not associated with any specific
                       file.  The file descriptor used for creating MAP_ANON
                       must be -1.  The offset parameter is ignored.

     MAP_FIXED         Do not permit the system to select a different address
                       than the one specified.  If the specified address can-
                       not be used, mmap() will fail.  If MAP_FIXED is speci-
                       fied, addr must be a multiple of the pagesize.  Use of
                       this option is discouraged.

     MAP_HASSEMAPHORE  Notify the kernel that the region may contain sema-
                       phores and that special handling may be necessary.

     MAP_NOCORE        Region is not included in a core file.

     MAP_NOSYNC        Causes data dirtied via this VM map to be flushed to
                       physical media only when necessary (usually by the
                       pager) rather then gratuitously.  Typically this pre-
                       vents the update daemons from flushing pages dirtied
                       through such maps and thus allows efficient sharing of
                       memory across unassociated processes using a file-
                       backed shared memory map.  Without this option any VM
                       pages you dirty may be flushed to disk every so often
                       (every 30-60 seconds usually) which can create perfor-
                       mance problems if you do not need that to occur (such
                       as when you are using shared file-backed mmap regions
                       for IPC purposes).  Note that VM/filesystem coherency
                       is maintained whether you use MAP_NOSYNC or not.  This
                       option is not portable across UNIX platforms (yet),
                       though some may implement the same behavior by default.

                       WARNING!  Extending a file with ftruncate(2), thus cre-
                       ating a big hole, and then filling the hole by modify-
                       ing a shared mmap() can lead to severe file fragmenta-
                       tion.  In order to avoid such fragmentation you should
                       always pre-allocate the file's backing store by
                       write()ing zero's into the newly extended area prior to
                       modifying the area via your mmap().  The fragmentation
                       problem is especially sensitive to MAP_NOSYNC pages,
                       because pages may be flushed to disk in a totally ran-
                       dom order.

                       The same applies when using MAP_NOSYNC to implement a
                       file-based shared memory store.  It is recommended that
                       you create the backing store by write()ing zero's to
                       the backing file rather then ftruncate()ing it.  You
                       can test file fragmentation by observing the KB/t
                       (kilobytes per transfer) results from an ``iostat 1''
                       while reading a large file sequentially, e.g. using
                       ``dd if=filename of=/dev/null bs=32k''.

                       The fsync(2) function will flush all dirty data and
                       metadata associated with a file, including dirty NOSYNC
                       VM data, to physical media.  The sync(8) command and
                       sync(2) system call generally do not flush dirty NOSYNC
                       VM data.  The msync(2) system call is obsolete since
                       BSD implements a coherent filesystem buffer cache.
                       However, it may be used to associate dirty VM pages
                       with filesystem buffers and thus cause them to be
                       flushed to physical media sooner rather then later.

     MAP_PRIVATE       Modifications are private.

     MAP_SHARED        Modifications are shared.

     MAP_STACK         This option is only available if your system has been
                       compiled with VM_STACK defined when compiling the ker-
                       nel.  This is the default for i386 only.  Consider
                       adding -DVM_STACK to COPTFLAGS in your /etc/make.conf
                       to enable this option for other architechures.
                       MAP_STACK implies MAP_ANON, and offset of 0.  fd must
                       be -1 and prot must include at least PROT_READ and
                       PROT_WRITE.  This option creates a memory region that
                       grows to at most len bytes in size, starting from the
                       stack top and growing down.  The stack top is the
                       starting address returned by the call, plus len bytes.
                       The bottom of the stack at maximum growth is the start-
                       ing address returned by the call.

     The close(2) function does not unmap pages, see munmap(2) for further

     The current design does not allow a process to specify the location of
     swap space.  In the future we may define an additional mapping type,
     MAP_SWAP, in which the file descriptor argument specifies a file or
     device to which swapping should be done.

     Upon successful completion, mmap() returns a pointer to the mapped
     region.  Otherwise, a value of MAP_FAILED is returned and errno is set to
     indicate the error.

     Mmap() will fail if:

     [EACCES]           The flag PROT_READ was specified as part of the prot
                        parameter and fd was not open for reading.  The flags
                        MAP_SHARED and PROT_WRITE were specified as part of
                        the flags and prot parameters and fd was not open for

     [EBADF]            fd is not a valid open file descriptor.

     [EINVAL]           MAP_FIXED was specified and the addr parameter was not
                        page aligned, or part of the desired address space
                        resides out of the valid address space for a user

     [EINVAL]           Len was negative.

     [EINVAL]           MAP_ANON was specified and the fd parameter was not

     [EINVAL]           MAP_ANON has not been specified and fd did not refer-
                        ence a regular or character special file.

     [EINVAL]           Offset was not page-aligned.  (See BUGS below.)

     [ENOMEM]           MAP_FIXED was specified and the addr parameter wasn't
                        available.  MAP_ANON was specified and insufficient
                        memory was available.  The system has reached the per-
                        process mmap limit specified in the vm.max_proc_mmap

     madvise(2), mincore(2), mlock(2), mprotect(2), msync(2), munlock(2),
     munmap(2), getpagesize(3)

     len is limited to 2GB.  Mmapping slightly more than 2GB doesn't work, but
     it is possible to map a window of size (filesize % 2GB) for file sizes of
     slightly less than 2G, 4GB, 6GB and 8GB.

     The limit is imposed for a variety of reasons.  Most of them have to do
     with FreeBSD not wanting to use 64 bit offsets in the VM system due to
     the extreme performance penalty.  So FreeBSD uses 32bit page indexes and
     this gives FreeBSD a maximum of 8TB filesizes.  It's actually bugs in the
     filesystem code that causes the limit to be further restricted to 1TB
     (loss of precision when doing blockno calculations).

     Another reason for the 2GB limit is that filesystem metadata can reside
     at negative offsets.

FreeBSD 4.10                   November 17, 2001                  FreeBSD 4.10


Want to link to this manual page? Use this URL:

home | help