Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MLX4EN(4)		 BSD Kernel Interfaces Manual		     MLX4EN(4)

NAME
     mlx4en -- Mellanox	ConnectX-3 10GbE/40GbE network adapter driver

SYNOPSIS
     To	compile	this driver into the kernel, place these lines in your kernel
     configuration file:

	   options COMPAT_LINUXKPI
	   device mlx4
	   device mlx4en

     To	load the driver	as a module at run-time, run this command as root:

	   kldload mlx4en

     To	load the driver	as a module at boot time, place	this line in
     loader.conf(5):

	   mlx4en_load="YES"

DESCRIPTION
     Mellanox ConnectX adapter cards with Virtual Protocol Interconnect	(VPI)
     provide the highest performing and	most flexible interconnect solution
     for Enterprise Data Centers, High-Performance Computing, and Embedded en-
     vironments.  Clustered data bases,	parallelized applications, transac-
     tional services and high-performance embedded I/O applications will
     achieve significant performance improvements resulting in reduced comple-
     tion time and lower cost per operation.

HARDWARE
     The mlx4en	driver supports	the following network adapters:

     +o	 Mellanox ConnectX-2 (ETH)
     +o	 Mellanox ConnectX-3 (ETH)

SUPPORT
     For general information and support, go to	the Mellanox support website
     at: http://www.mellanox.com/

     If	an issue is identified with this driver	and a supported	network
     adapter, please email the specific	information to
     <freebsd-drivers@mellanox.com>.

SEE ALSO
     mlx4ib(4),	ifconfig(8)

HISTORY
     The mlx4en	device driver first appeared in	FreeBSD	9.x.

AUTHORS
     The mlx4en	driver was written by Mellanox Technologies
     <freebsd-drivers@mellanox.com>.

BSD				 March 1, 2017				   BSD

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mlx4en&sektion=4&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help