Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MIREDO-SERVER.CONF(5)	    System Manager's Manual	 MIREDO-SERVER.CONF(5)

NAME
       miredo-server.conf - configuration for miredo-server

SYNOPSIS
       miredo-server.conf

DESCRIPTON
       miredo-server.conf   is the configuration file for miredo-server.  Each
       configuration directive consists	of one directive name,	possibly  fol-
       lowed  by  one  or several spaces and a value for the directive.	 White
       spaces, empty lines and lines starting with '#' are ignored.

       Directives are case-insensitive.	A comprehensive	list of	the  supported
       directives follows:

SERVER OPTIONS
       ServerBindAddress server_ip
	      Specifies	 the  primary  IPv4  address  of  the  Teredo  server.
	      miredo-server will bind to UDP/IPv4 port 3544  on	 this  address
	      and waits	for packets from Teredo	clients. It will advertise the
	      Teredo prefix which is defined with the Prefix directive.

	      A	Teredo server needs two	subsequent  IPv4  addresses.  It  will
	      wait  for	 UDP  IPv4  packets  on	 port  3544 on both addresses.
	      server_ip	specifies the lowest of	both IPv4 addresses, which  is
	      known as the primary IPv4	server address.	The secondary IPv4 ad-
	      dress should be server_ip	+ 1 and	must also be assigned  to  the
	      server.

       ServerBindAddress2 server_ip2
	      It  is possible to specify a secondary IPv4 server address manu-
	      ally.  However, Miredo clients will  need	 manual	 configuration
	      (with the	ServerAddress2 directive in miredo.conf). Other	Teredo
	      clients are believed not to support such setup.

       Prefix teredo_prefix
	      This directive specifies the Teredo prefix which the Teredo  re-
	      lay and/or server	will advertise.	 teredo_prefix must be a valid
	      IPv6 prefix.

	      The default value	is 2001:0000::.	 A 32-bits prefix is  required
	      to  use this option. Since you do	not have such big an IPv6 pre-
	      fix YOU WILL NOT USE THIS	OPTION.	 Moreover, certain third party
	      Teredo client implementations require the	default	prefix.

       InterfaceMTU mtu
	      This directive overrides the value of the	MTU that is advertised
	      to Teredo	clients. The default value is 1280  bytes  and	should
	      not be changed if	the default Teredo prefix is used.

	      YOU  MUST	 NOT  USE  THIS	 OPTION	with the default prefix.  This
	      would break interoperability with	most Teredo relays.

       SyslogFacility facility
	      Specify which syslog's facility is to be used  by	 miredo-server
	      for logging.  Possible values are: daemon	(the default), local0,
	      ... local7, kern and user	(see syslog(2)).

SEE ALSO
       miredo-server(8)

AUTHOR
       Remi Denis-Courmont <remi at remlab dot net>

       http://www.remlab.net/miredo/

miredo				 February 2008		 MIREDO-SERVER.CONF(5)

NAME | SYNOPSIS | DESCRIPTON | SERVER OPTIONS | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=miredo-server.conf&sektion=5&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help