Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MH(1)			    General Commands Manual			 MH(1)

NAME
       mh - Message Handler

SYNOPSIS
       any MH command

DESCRIPTION
       MH  is the name of a powerful message handling system.  Rather then be-
       ing a single comprehensive program, MH  consists	 of  a	collection  of
       fairly  simple  single-purpose programs to send,	receive, save, and re-
       trieve messages.	 The user should refer to the MH User's	Manual and the
       pages for the MH	programs in the	Unix Programmers Manual.

       Unlike mail, the	standard UNIX mail user	interface program, MH is not a
       closed system which must	be explicitly run, then	exited when  you  wish
       to  return  to  the shell.  You may freely intersperse MH commands with
       other shell commands, allowing you to read and answer your  mail	 while
       you  have  (for example)	a compilation running, or search for a file or
       run programs as needed to find the answer to someone's question	before
       answering their mail.

       The  rest of this manual	entry is a quick tutorial which	will teach you
       the basics of MH.  You should read the manual entries for the  individ-
       ual programs for	complete documentation.

       To  get	started	 using	MH,  put  the directory	/usr/local/bin on your
       $PATH.  This is best done in one	of the	files:	.profile,  .login,  or
       .cshrc  in  your	home directory.	 (Check	the manual entry for the shell
       you use,	in case	you don't know how to do this.)	 Run the inc  command.
       If  you've  never  used MH before, it will create the necessary default
       files and directories after asking you if you wish it to	do so.

       inc moves mail from your	system maildrop	into your MH `+inbox'  folder,
       breaking	it up into separate files and converting it to MH format as it
       goes.  It prints	one line for each message it processes,	containing the
       from field, the subject field and as much of the	first line of the mes-
       sage as will fit.  It leaves the	first message  it  processes  as  your
       current message.	 You'll	need to	run inc	each time you wish to incorpo-
       rate new	mail into your MH file.

       scan prints a list of the messages in your current folder.

       The commands: show, next, and prev are used to read  specific  messages
       from  the current folder.  show displays	the current message, or	a spe-
       cific message, which may	be specified by	its number, which you pass  as
       an  argument to show.  next and prev display, respectively, the message
       numerically after or before the current message.	  In  all  cases,  the
       message	displayed becomes the current message.	If there is no current
       message,	show may be called with	an argument, or	next may  be  used  to
       advance to the first message.

       rmm  (remove  message)  deletes	the current message.  It may be	called
       with message numbers passed as arguments, to delete specific messages.

       repl is used to respond to the current message (by default).  It	places
       you  in the editor with a prototype response form.  While you're	in the
       editor, you may peruse the item you're responding  to  by  reading  the
       file  @.	  After	completing your	response, type l to review it, or s to
       send it.

       comp allows you to compose a message by putting you in the editor on  a
       prototype message form, and then	lets you send it.

       All the MH commands may be run with the single argument:	`-help', which
       causes them to print a list of the arguments they may be	invoked	with.

       Commands	which take a message number as an argument (scan, show,	 repl,
       ...)   also  take  one of the words: first, prev, cur, next, or last to
       indicate	(respectively) the first, previous,  current,  next,  or  last
       message in the current folder (assuming they are	defined).

       Commands	 which	take a range of	message	numbers	(rmm, scan, show, ...)
       also take any of	the abbreviations:

	 _num1_-_num2_ - Indicates all messages	in the range <num1> to <num2>,
	    inclusive. The range must be nonempty.

	 _num_:+N
	 _num_:-N  -  Up to N messages beginning with (or ending with) message
	    num.  Num may be any of the	pre-defined symbols: first, prev, cur,
	    next or last.

	 first:N
	 prev:N
	 next:N
	 last:N	- The first, previous, next or last N messages,	if they	exist.

       There  are  many	 other possibilities such as creating multiple folders
       for different topics, and automatically refiling	messages according  to
       subject,	 source,  destination, or content.  These are beyond the scope
       of this manual entry.

       Following is a list of all the MH commands:

     ali (1)	    - list mail	aliases
     anno (1)	    - annotate messages
     burst (1)	    - explode digests into messages
     comp (1)	    - compose a	message
     dist (1)	    - redistribute a message to	additional addresses
     folder (1)	    - set/list current folder/message
     folders (1)    - list all folders
     forw (1)	    - forward messages
     inc (1)	    - incorporate new mail
     mark (1)	    - mark messages
     mhl (1)	    - produce formatted	listings of MH messages
     mhmail (1)	    - send or read mail
     mhook (1)	    - MH receive-mail hooks
     mhparam (1)    - print MH profile components
     mhpath (1)	    - print full pathnames of MH messages and folders
     msgchk (1)	    - check for	messages
     msh (1)	    - MH shell (and BBoard reader)
     next (1)	    - show the next message
     packf (1)	    - compress a folder	into a single file
     pick (1)	    - select messages by content
     prev (1)	    - show the previous	message
     prompter (1)   - prompting	editor front end
     rcvstore (1)   - incorporate new mail asynchronously
     refile (1)	    - file messages in other folders
     repl (1)	    - reply to a message
     rmf (1)	    - remove folder
     rmm (1)	    - remove messages
     scan (1)	    - produce a	one line per message scan listing
     send (1)	    - send a message
     show (1)	    - show (list) messages
     slocal (1)	    - special local mail delivery
     sortm (1)	    - sort messages
     vmh (1)	    - visual front-end to MH
     whatnow (1)    - prompting	front-end for send
     whom (1)	    - report to	whom a message would go

     mh-alias (5)   - alias file for MH	message	system
     mh-format (5)  - format file for MH message system
     mh-mail (5)    - message format for MH message system
     mh-profile	(5) - user customization for MH	message	system
     mh-sequence (5)- sequence specification for MH message system

     ap	(8)	    - parse addresses 822-style
     conflict (8)   - search for alias/password	conflicts
     dp	(8)	    - parse dates 822-style
     fmtdump (8)    - decode MH	format files
     install-mh	(8) - initialize the MH	environment
     post (8)	    - deliver a	message

FILES
       /usr/local/bin			   directory containing	MH commands
       /usr/local/lib/mh		   MH library

SEE ALSO
       The RAND	MH Message Handling System: User's Manual,
       The RAND	MH Message Handling System: Tutorial,
       The RAND	MH Message Handling System: The	UCI BBoards Facility,
       MH.5: How to process 200	messages a day and still get  some  real  work
       done

BUGS
       If  problems are	encountered with an MH program,	the problems should be
       reported	to the local maintainers of MH.	 When doing this, the name  of
       the  program should be reported,	along with the version information for
       the program.
       To find out what	version	of an MH program is being run, invoke the pro-
       gram with the `-help' switch.  In addition to listing the syntax	of the
       command,	the program will list information pertaining to	 its  version.
       This  information includes the version of MH, the host it was generated
       on, and the date	the program was	loaded.	 A second line of information,
       found  on versions of MH	after #5.380 include MH	configuration options.
       For example,

	    version: MH	6.1 #1[UCI] (glacier) of Wed Nov  6 01:13:53 PST 1985
	    options: [BSD42] [MHE] [NETWORK] [SENDMTS] [MMDFII]	[SMTP] [POP]

       The `6.1	#1[UCI]' indicates that	the program is	from  the  UCI	MH.6.1
       version of MH.  The program was generated on the	host `glacier' on `Wed
       Nov  6 01:13:53 PST 1985'.  It's	usually	a good idea to send the	output
       of the `-help' switch along with	your report.

       If  there  is  no local MH maintainer, try the address Bug-MH.  If that
       fails, use the Internet mailbox Bug-MH@ICS.UCI.EDU.

FILES
       $HOME/.mh_profile		   The user profile

PROFILE	COMPONENTS
       Path:		    To determine the user's MH directory

[mh.6]				    MH.6.8				 MH(1)

NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | BUGS | FILES | PROFILE COMPONENTS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mh&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help