Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
mfscsstatsdump(8)	    This is part of MooseFS	     mfscsstatsdump(8)

NAME
       mfscsstatsdump  - dump usage data from chunkserver stats	file in	csv or
       png format

SYNOPSIS
       mfscsstatsdump -f fields	[-i stats_file]	[-r range][-s  separator]  [-p
       png_filename [-x	chart_width] [-y chart_height]]	[-hHd]

DESCRIPTION
       mfscsstatsdump dumps usage data from chunkserver	stats file.  These are
       the same	data sets that are used	to make	CGI charts. Output can be  ei-
       ther  in	text format (csv) or in	graphical format (png).	That means -p,
       -x and -y options are mutually exclusive	with -h, -H and	-d options.

       MooseFS chunkserver saves the stats file	in the DATA_PATH  directory  -
       see mfschunkserver.cfg(5)

OPTIONS
       -f     field  names separated by	',' (see FIELDS	section); at least one
	      field is mandatory; if an	asterisk (*) is	used, all  fields  are
	      dumped

       -i     name    of    mfs	   binary    stats    file    (default:	   de-
	      fault_data_path/csstats.mfs)

       -r     range type: 0 - short range (minute) 1 - medium  range  (6  min-
	      utes) 2 -	long range (30 minutes)	3 - very long range (day)

       -s     specify column separator (default: tabulator)

       -p     optional	PNG  filename  (field  name will be added before .png;
	      YYYY -> YYYY_FIELD.png, YYYY.png -> YYYY_FIELD.png)

       -x     PNG chart	width (default:	1600)

       -y     PNG chart	height (should be divisible by 20 -  if	 not  then  it
	      will be adjusted;	default:320)

       -h     "human-readable" numbers using base 2 prefixes (IEC 60027)

       -H     "human-readable" numbers using base 10 prefixes (SI)

       -d     show timestamps in YYYY-MM-DD HH:MM format

FIELDS
       ucpu	     User cpu usage

       scpu	     System cpu	usage

       cpu	     Total  cpu	 usage	(in  csv  sum of scpu and ucpu,	in png
		     shows both	in different colors)

       masterin	     Data received from	master

       masterout     Data sent to master

       csrepin	     Data received by replicator

       csrepout	     Data sent by replicator

       csservin	     Data received by csserv

       csservout     Data sent by csserv

       bwin	     Data bandwidth in (in csv sum of csrepin and csservin, in
		     png shows both in different colors)

       bwout	     Data bandwidth out	(in csv	sum of csrepout	and csservout,
		     in	png shows both in different colors)

       hdrbytesr     Bytes read	(headers)

       hdrbytesw     Bytes written (headers)

       hdrllopr	     Low level reads (headers)

       hdrllopw	     Low level writes (headers)

       databytesr    Bytes read	(data)

       databytesw    Bytes written (data)

       datallopr     Low level reads (data)

       datallopw     Low level writes (data)

       hddread	     HDD read (in csv sum of hdrbytesr and databytesr, in  png
		     shows both	in different colors)

       hddwrite	     HDD write (in csv sum of hdrbytesw	and databytesw,	in png
		     shows both	in different colors)

       hddopsr	     HDD low level read	(in csv	sum of hdrllopr	and datallopr,
		     in	png shows both in different colors)

       hddopsw	     HDD  low  level  write (in	csv sum	of hdrllopw and	datal-
		     lopw, in png shows	both in	different colors)

       hlopr	     High level	reads

       hlopw	     High level	writes

       rtime	     Read time

       wtime	     Write time

       repl	     Replicate chunk ops

       create	     Create chunk ops

       delete	     Delete chunk ops

       version	     Set version ops

       duplicate     Duplicate ops

       truncate	     Truncate ops

       duptrunc	     Duptrunc (duplicate+truncate) ops

       test	     Test chunk	ops

       load	     Server load

       memoryrss     Resident memory usage

       memoryvirt    Virtual memory usage

       mem	     Total memory usage	(in csv	is the same as memoryvirt,  in
		     png shows both memoryrss and memoryvirt using two colors)

OUTPUT
       Text  output  -	text  (csv) file where first column is a timestamp (or
       date if -d option was specified), the following	column	are  what  was
       specified  with	the  -f	 options,  formatted according to used options
       (none, -s and -h	or -H)

       Graphical output	- one png file with a chart is created for every field
       specified  with	the -f option, according to the	naming scheme declared
       with the	-p option. Size	may be adjusted	with -x	and -y options.

REPORTING BUGS
       Report bugs to <bugs@moosefs.com>.

COPYRIGHT
       Copyright (C) 2020 Jakub	Kruszona-Zawadzki, Core	Technology Sp. z o.o.

       This file is part of MooseFS.

       MooseFS is free software; you can redistribute it and/or	modify it  un-
       der  the	 terms	of  the	GNU General Public License as published	by the
       Free Software Foundation, version 2 (only).

       MooseFS is distributed in the hope that it will be useful, but  WITHOUT
       ANY  WARRANTY;  without even the	implied	warranty of MERCHANTABILITY or
       FITNESS FOR A PARTICULAR	PURPOSE. See the GNU  General  Public  License
       for more	details.

       You should have received	a copy of the GNU General Public License along
       with MooseFS; if	not, write to the Free Software	Foundation,  Inc.,  51
       Franklin	  St,  Fifth  Floor,  Boston,  MA  02111-1301,	USA  or	 visit
       http://www.gnu.org/licenses/gpl-2.0.html

SEE ALSO
       mfschunkserver(8), mfsstatsdump(8)

MooseFS	3.0.113-1		   May 2020		     mfscsstatsdump(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FIELDS | OUTPUT | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mfscsstatsdump&sektion=8&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help