Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MD(4)		       FreeBSD Kernel Interfaces Manual			 MD(4)

NAME
     md	-- memory disk

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device md

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   geom_md_load="YES"

DESCRIPTION
     The md driver provides support for	four kinds of memory backed virtual
     disks:

     malloc   Backing store is allocated using malloc(9).  Only	one malloc-
	      bucket is	used, which means that all md devices with malloc
	      backing must share the malloc-per-bucket-quota.  The exact size
	      of this quota varies, in particular with the amount of RAM in
	      the system.  The exact value can be determined with vmstat(8).

     preload  A	file loaded by loader(8) with type `md_image' is used for
	      backing store.  For backwards compatibility the type `mfs_root'
	      is also recognized.  If the kernel is created with option
	      MD_ROOT the first	preloaded image	found will become the root
	      file system.

     vnode    A	regular	file is	used as	backing	store.	This allows for	mount-
	      ing ISO images without the tedious detour	over actual physical
	      media.

     swap     Backing store is allocated from buffer memory.  Pages get	pushed
	      out to the swap when the system is under memory pressure,	other-
	      wise they	stay in	the operating memory.  Using swap backing is
	      generally	preferable over	malloc backing.

     For more information, please see mdconfig(8).

EXAMPLES
     To	create a kernel	with a ramdisk or MD file system, your kernel config
     needs the following options:

	   options	   MD_ROOT		   # MD	is a potential root device
	   options	   MD_ROOT_READONLY	   # disallow mounting root writeable
	   options	   MD_ROOT_SIZE=8192	   # 8MB ram disk
	   makeoptions	   MFS_IMAGE=/h/foo/ARM-MD
	   options	   ROOTDEVNAME=\"ufs:md0\"

     The image in /h/foo/ARM-MD	will be	loaded as the initial image each boot.
     To	create the image to use, please	follow the steps to create a file-
     backed disk found in the mdconfig(8) man page.  Other tools will also
     create these images, such as NanoBSD.

ARM KERNEL OPTIONS
     On	armv6 and armv7	architectures, an MD_ROOT image	larger than approxi-
     mately 55 MiB may require building	a custom kernel	using several tuning
     options related to	kernel memory usage.

     options LOCORE_MAP_MB=<num>
	     This configures how much memory is	mapped for the kernel during
	     the early initialization stages.  The value must be at least as
	     large as the kernel plus all preloaded modules, including the
	     root image.  There	is no downside to setting this value too
	     large, as long as it does not exceed the amount of	physical mem-
	     ory.  The default is 64 MiB.

     options NKPT2PG=<num>
	     This configures the number	of kernel L2 page table	pages to pre-
	     allocate during kernel initialization.  Each L2 page can map 4
	     MiB of kernel space.  The value must be large enough to map the
	     kernel plus all preloaded modules,	including the root image.  The
	     default value is 32, which	is sufficient to map 128 MiB.

     options VM_KMEM_SIZE_SCALE=<num>
	     This configures the amount	of kernel virtual address (KVA)	space
	     to	dedicate to the	kmem_arena map.	 The scale value is the	ratio
	     of	physical to virtual pages.  The	default	value of 3 allocates a
	     page of KVA for each 3 pages of physical ram in the system.

	     The kernel	and modules, including the root	image, also consume
	     KVA.  The combination of a	large root image and the default scal-
	     ing may preallocate so much KVA that there	is not enough remain-
	     ing address space to allocate kernel stacks, IO buffers, and
	     other resources that are not part of kmem_arena.  Overallocating
	     kmem_arena	space is likely	to manifest as failure to launch user-
	     land processes with "cannot allocate kernel stack"	messages.

	     Setting the scale value too high may result in kernel failure to
	     allocate memory because kmem_arena	is too small, and the failure
	     may require significant runtime to	manifest.  Empirically,	a
	     value of 5	works well for a 200 MiB root image on a system	with 2
	     GiB of physical ram.

SEE ALSO
     gpart(8), loader(8), mdconfig(8), mdmfs(8), newfs(8), vmstat(8)

HISTORY
     The md driver first appeared in FreeBSD 4.0 as a cleaner replacement for
     the MFS functionality previously used in PicoBSD and in the FreeBSD
     installation process.

     The md driver did a hostile takeover of the vn(4) driver in FreeBSD 5.0.

AUTHORS
     The md driver was written by Poul-Henning Kamp <phk@FreeBSD.org>.

FreeBSD	11.2		       December	26, 2017		  FreeBSD 11.2

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | ARM KERNEL OPTIONS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=md&sektion=4&manpath=FreeBSD+11.2-RELEASE+and+Ports>

home | help