Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
mcopy(1)		    General Commands Manual		      mcopy(1)

Name
       mcopy - copy MSDOS files	to/from	Unix

Note of	warning
       This  manpage  has  been	 automatically generated from mtools's texinfo
       documentation, and may not be entirely accurate or complete.   See  the
       end of this man page for	details.

Description
       The  mcopy  command  is	used to	copy MS-DOS files to and from Unix. It
       uses the	following syntax:

	  mcopy	[-bspanvmQT] [-D clash_option] sourcefile targetfile
	  mcopy	[-bspanvmQT] [-D clash_option] sourcefile [ sourcefiles... ] targetdirectory
	  mcopy	[-tnvm]	MSDOSsourcefile

       Mcopy copies the	specified file to the named file, or  copies  multiple
       files  to the named directory.  The source and target can be either MS-
       DOS or Unix files.

       The use of a drive letter designation on	the MS-DOS files, 'a:' for ex-
       ample,  determines the direction	of the transfer.  A missing drive des-
       ignation	implies	a Unix file whose path starts in  the  current	direc-
       tory.  If a source drive	letter is specified with no attached file name
       (e.g. mcopy a: .), all files are	copied from that drive.

       If only a single, MS-DOS	source	parameter  is  provided	 (e.g.	"mcopy
       a:foo.exe"),  an	 implied destination of	the current directory (`.') is
       assumed.

       A filename of `-' means standard	input or standard output, depending on
       its position on the command line.

       Mcopy accepts the following command line	options:

       t      Text  file  transfer.   Mcopy  translates	 incoming carriage re-
	      turn/line	feeds to line feeds when copying from MS-DOS to	 Unix,
	      and vice-versa when copying from Unix to MS-DOS.

       b      Batch mode. Optimized for	huge recursive copies, but less	secure
	      if a crash happens during	the copy.

       s      Recursive	copy.  Also copies directories and their contents

       p      Preserves	the attributes of the copied files

       Q      When mcopying multiple files, quits as soon as  one  copy	 fails
	      (for example due to lacking storage space	on the target disk)

       a      Text  (ASCII) file transfer.  ASCII translates incoming carriage
	      return/line feeds	to line	feeds.

       T      Text (ASCII) file	transfer with character	set conversion.	  Dif-
	      fers  from -a in the ASCII also translates incoming PC-8 charac-
	      ters to ISO-8859-1 equivalents as	far as possible.  When reading
	      DOS  files,  untranslatable characters are replaced by '#'; when
	      writing DOS files, untranslatable	 characters  are  replaced  by
	      '.'.

       n      No confirmation when overwriting Unix files.  ASCII doesn't warn
	      the user when overwriting	an existing Unix file. If  the	target
	      file  already  exists, and the -n	option is not in effect, mcopy
	      asks whether to overwrite	the file or to	rename	the  new  file
	      (see  `name clashes') for	details).  In order to switch off con-
	      firmation	for DOS	files, use -o.

       m      Preserve the file	modification time.

       v      Verbose. Displays	the name of each file as it is copied.

Bugs
       Unlike MS-DOS, the '+' operator (append)	from MS-DOS is not  supported.
       However,	you may	use mtype to produce the same effect:

	  mtype	a:file1	a:file2	a:file3	>unixfile
	  mtype	a:file1	a:file2	a:file3	| mcopy	- a:msdosfile

See Also
       Mtools' texinfo doc

Viewing	the texi doc
       This  manpage  has  been	 automatically generated from mtools's texinfo
       documentation. However, this process is only  approximative,  and  some
       items,  such as crossreferences,	footnotes and indices are lost in this
       translation process.  Indeed, these items have no appropriate represen-
       tation  in  the manpage format.	Moreover, not all information has been
       translated into the manpage version.  Thus I strongly advise you	to use
       the original texinfo doc.  See the end of this manpage for instructions
       how to view the texinfo doc.

       *      To generate a printable copy from	the texinfo doc, run the  fol-
	      lowing commands:

		     ./configure; make dvi; dvips mtools.dvi

       *      To generate a html copy,	run:

		     ./configure; make html

       A premade html can be found at `http://www.gnu.org/software/mtools/man-
       ual/mtools.html'

       *      To generate an info copy (browsable  using  emacs'  info	mode),
	      run:

		     ./configure; make info

       The  texinfo doc	looks most pretty when printed or as html.  Indeed, in
       the info	version	certain	examples are difficult	to  read  due  to  the
       quoting conventions used	in info.

mtools-4.0.26			    28Nov20			      mcopy(1)

Name | Note of warning | Description | Bugs | See Also | Viewing the texi doc

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=mcopy&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help