Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
MALO(4)                FreeBSD Kernel Interfaces Manual                MALO(4)

NAME
     malo - Marvell Libertas IEEE 802.11b/g wireless network driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device malo
           device pci
           device wlan
           device firmware

     Alternatively, to load the driver as a module at boot time, place the
     following lines in loader.conf(5):

           if_malo_load="YES"

DESCRIPTION
     The malo driver provides support for Marvell Libertas 88W8335 based PCI
     and Cardbus network adapters.  malo supports station and monitor mode
     operation.  Only one virtual interface may be configured at any time.
     For more information on configuring this device, see ifconfig(8).

     This driver requires the malofw be installed before it will work.  The
     firmware files are not publicly available.  A package of the firmware
     which can be installed via pkg_add(1) with:

           http://weongyo.org/project/malo/malo-firmware-1.4.tar.gz

HARDWARE
     The following cards are among those supported by the malo driver:

     Card                Chip    Bus     Standard
     Netgear WG311v3     88W8335 PCI     b/g
     Tenda TWL542P       88W8335 PCI     b/g
     U-Khan UW-2054i     88W8335 PCI     b/g

EXAMPLES
     Join an existing BSS network (i.e., connect to an access point):

           ifconfig wlan create wlandev malo0 inet 192.168.0.20 \
               netmask 0xffffff00

     Join a specific BSS network with network name ``my_net'':

           ifconfig wlan create wlandev malo0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

           ifconfig wlan create wlandev malo0 ssid my_net \
                   wepmode on wepkey 0x1234567890 weptxkey 1 up

SEE ALSO
     cardbus(4), pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4),
     ifconfig(8), wpa_supplicant(8)

HISTORY
     The malo device driver first appeared in FreeBSD 7.1.

FreeBSD 11.0-PRERELEASE         March 26, 2009         FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | EXAMPLES | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=malo&sektion=4&manpath=FreeBSD+8.0-RELEASE>

home | help