Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
MAKEFS(8)               FreeBSD System Manager's Manual              MAKEFS(8)

NAME
     makefs - create a file system image from a directory tree or a mtree
     manifest

SYNOPSIS
     makefs [-DxZ] [-B byte-order] [-b free-blocks] [-d debug-mask]
            [-F specfile] [-f free-files] [-M minimum-size] [-m maximum-size]
            [-N userdb-dir] [-o fs-options] [-S sector-size] [-s image-size]
            [-t fs-type] image-file directory | manifest [extra-directory ...]

DESCRIPTION
     The utility makefs creates a file system image into image-file from the
     directory tree directory or from the mtree manifest manifest.  If
     optional directory tree extra-directory is passed, then the directory
     tree of each argument will be merged into the directory or manifest first
     before creating image-file.  No special devices or privileges are
     required to perform this task.

     The options are as follows:

     -B byte-order
           Set the byte order of the image to byte-order.  Valid byte orders
           are `4321', `big', or `be' for big endian, and `1234', `little', or
           `le' for little endian.  Some file systems may have a fixed byte
           order; in those cases this argument will be ignored.

     -b free-blocks
           Ensure that a minimum of free-blocks free blocks exist in the
           image.  An optional `%' suffix may be provided to indicate that
           free-blocks indicates a percentage of the calculated image size.

     -D    Treat duplicate paths in an mtree manifest as warnings not error.

     -d debug-mask
           Enable various levels of debugging, depending upon which bits are
           set in debug-mask.  XXX: document these

     -F specfile
           Use specfile as an mtree(8) `specfile' specification.  This option
           has no effect when the image is created from a mtree manifest
           rather than a directory.

           If a specfile entry exists in the underlying file system, its
           permissions and modification time will be used unless specifically
           overridden by the specfile.  An error will be raised if the type of
           entry in the specfile conflicts with that of an existing entry.

           In the opposite case (where a specfile entry does not have an entry
           in the underlying file system) the following occurs: If the
           specfile entry is marked optional, the specfile entry is ignored.
           Otherwise, the entry will be created in the image, and it is
           necessary to specify at least the following parameters in the
           specfile: type, mode, gname, or gid, and uname or uid, and link (in
           the case of symbolic links).  If time isn't provided, the current
           time will be used.  If flags isn't provided, the current file flags
           will be used.  Missing regular file entries will be created as
           zero-length files.

     -f free-files
           Ensure that a minimum of free-files free files (inodes) exist in
           the image.  An optional `%' suffix may be provided to indicate that
           free-files indicates a percentage of the calculated image size.

     -M minimum-size
           Set the minimum size of the file system image to minimum-size.

     -m maximum-size
           Set the maximum size of the file system image to maximum-size.  An
           error will be raised if the target file system needs to be larger
           than this to accommodate the provided directory tree.

     -N dbdir
           Use the user database text file master.passwd and group database
           text file group from dbdir, rather than using the results from the
           system's getpwnam(3) and getgrnam(3) (and related) library calls.

     -o fs-options
           Set file system specific options.  fs-options is a comma separated
           list of options.  Valid file system specific options are detailed
           below.

     -p    Deprecated.  See the -Z flag.

     -S sector-size
           Set the file system sector size to sector-size.  Defaults to 512.

     -s image-size
           Set the size of the file system image to image-size.

     -t fs-type
           Create an fs-type file system image.  The following file system
           types are supported:

                 ffs     BSD fast file system (default).

                 cd9660  ISO 9660 file system.

     -x    Exclude file system nodes not explicitly listed in the specfile.

     -Z    Create the image as a sparse file.

     Where sizes are specified, a decimal number of bytes is expected.  Two or
     more numbers may be separated by an ``x'' to indicate a product.  Each
     number may have one of the following optional suffixes:
           b    Block; multiply by 512
           k    Kibi; multiply by 1024 (1 KiB)
           m    Mebi; multiply by 1048576 (1 MiB)
           g    Gibi; multiply by 1073741824 (1 GiB)
           t    Tebi; multiply by 1099511627776 (1 TiB)
           w    Word; multiply by the number of bytes in an integer

   FFS-specific options
     ffs images have ffs-specific optional parameters that may be provided.
     Each of the options consists of a keyword, an equal sign (`='), and a
     value.  The following keywords are supported:

           avgfilesize   Expected average file size.
           avgfpdir      Expected number of files per directory.
           bsize         Block size.
           density       Bytes per inode.
           fsize         Fragment size.
           label         Label name of the image.
           maxbpg        Maximum blocks per file in a cylinder group.
           minfree       Minimum % free.
           optimization  Optimization preference; one of `space' or `time'.
           extent        Maximum extent size.
           maxbpcg       Maximum total number of blocks in a cylinder group.
           version       UFS version.  1 for FFS (default), 2 for UFS2.

   CD9660-specific options
     cd9660 images have ISO9660-specific optional parameters that may be
     provided.  The arguments consist of a keyword and, optionally, an equal
     sign (`='), and a value.  The following keywords are supported:

           allow-deep-trees      Allow the directory structure to exceed the
                                 maximum specified in the spec.
           allow-max-name        Allow 37 instead of 33 characters for
                                 filenames by omitting the version id.
           allow-multidot        Allow multiple dots in a filename.
           applicationid         Application ID of the image.
           archimedes            Use the `ARCHIMEDES' extension to encode RISC
                                 OS metadata.
           chrp-boot             Write an MBR partition table to the image to
                                 allow older CHRP hardware to boot.
           boot-load-segment     Set load segment for the boot image.
           bootimage             Filename of a boot image in the format
                                 ``sysid;filename'', where ``sysid'' is one of
                                 `i386', `mac68k', `macppc', or `powerpc'.
           generic-bootimage     Load a generic boot image into the first 32K
                                 of the cd9660 image.
           hard-disk-boot        Boot image is a hard disk image.
           keep-bad-images       Do not throw away images whose write was
                                 aborted due to an error.  For debugging
                                 purposes.
           label                 Label name of the image.
           no-boot               Boot image is not bootable.
           no-emul-boot          Boot image is a ``no emulation'' ElTorito
                                 image.
           no-trailing-padding   Do not pad the image (apparently Linux needs
                                 the padding).
           preparer              Preparer ID of the image.
           publisher             Publisher ID of the image.
           rockridge             Use RockRidge extensions (for longer
                                 filenames, etc.).
           volumeid              Volume set identifier of the image.

SEE ALSO
     mtree(5), mtree(8), newfs(8)

HISTORY
     The makefs utility appeared in NetBSD 1.6.

AUTHORS
     Luke Mewburn <lukem@NetBSD.org> (original program)
     Daniel Watt,
     Walter Deignan,
     Ryan Gabrys,
     Alan Perez-Rathke,
     Ram Vedam (cd9660 support)

FreeBSD 11.0-PRERELEASE         August 16, 2013        FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=makefs&sektion=8&manpath=FreeBSD+10.0-RELEASE>

home | help