Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
M4(1)                   FreeBSD General Commands Manual                  M4(1)

NAME
     m4 - macro language processor

SYNOPSIS
     m4 [-gPs] [-Dname[=value]] [-d flags] [-I dirname] [-o filename]
        [-t macro] [-Uname] [file ...]

DESCRIPTION
     The m4 utility is a macro processor that can be used as a front end to
     any language (e.g., C, ratfor, fortran, lex, and yacc).  If no input
     files are given, m4 reads from the standard input, otherwise files
     specified on the command line are processed in the given order.  Input
     files can be regular files, files in the m4 include paths, or a single
     dash (`-'), denoting standard input.  m4 writes the processed text to the
     standard output, unless told otherwise.

     Macro calls have the form name(argument1[, argument2, ..., argumentN]).

     There cannot be any space following the macro name and the open
     parenthesis (`(').  If the macro name is not followed by an open
     parenthesis it is processed with no arguments.

     Macro names consist of a leading alphabetic or underscore possibly
     followed by alphanumeric or underscore characters, e.g., valid macro
     names match the pattern ``[a-zA-Z_][a-zA-Z0-9_]*''.

     In arguments to macros, leading unquoted space, tab, and newline (`\n')
     characters are ignored.  To quote strings, use left and right single
     quotes (e.g.,  ` this is a string with a leading space').  You can change
     the quote characters with the changequote built-in macro.

     Most built-ins don't make any sense without arguments, and hence are not
     recognized as special when not followed by an open parenthesis.

     The options are as follows:

     -Dname[=value]
             Define the symbol name to have some value (or NULL).

     -d flags
             Set trace flags.  flags may hold the following:

             a       print macro arguments.

             c       print macro expansion over several lines.

             e       print result of macro expansion.

             f       print filename location.

             l       print line number.

             q       quote arguments and expansion with the current quotes.

             t       start with all macros traced.

             x       number macro expansions.

             V       turn on all options.

             By default, trace is set to "eq".

     -g      Activate GNU-m4 compatibility mode.  In this mode, translit
             handles simple character ranges (e.g., a-z), regular expressions
             mimic emacs behavior, multiple m4wrap calls are handled as a
             stack, the number of diversions is unlimited, empty names for
             macro definitions are allowed, and eval understands
             `0rbase:value' numbers.

     -I dirname
             Add directory dirname to the include path.

     -o filename
             Send trace output to filename.

     -P      Prefix all built-in macros with `m4_'.  For example, instead of
             writing define, use m4_define.

     -s      Output line synchronization directives, suitable for cpp(1).

     -t macro
             Turn tracing on for macro.

     -Uname  Undefine the symbol name.

SYNTAX
     m4 provides the following built-in macros.  They may be redefined, losing
     their original meaning.  Return values are null unless otherwise stated.

     builtin(name)
                  Calls a built-in by its name, overriding possible
                  redefinitions.

     changecom(startcomment, endcomment)
                  Changes the start comment and end comment sequences.
                  Comment sequences may be up to five characters long.  The
                  default values are the hash sign and the newline character.

                        # This is a comment

                  With no arguments, comments are turned off.  With one single
                  argument, the end comment sequence is set to the newline
                  character.

     changequote(beginquote, endquote)
                  Defines the open quote and close quote sequences.  Quote
                  sequences may be up to five characters long.  The default
                  values are the backquote character and the quote character.

                        `Here is a quoted string'

                  With no arguments, the default quotes are restored.  With
                  one single argument, the close quote sequence is set to the
                  newline character.

     decr(arg)    Decrements the argument arg by 1.  The argument arg must be
                  a valid numeric string.

     define(name, value)
                  Define a new macro named by the first argument name to have
                  the value of the second argument value.  Each occurrence of
                  `$n' (where n is 0 through 9) is replaced by the n'th
                  argument.  `$0' is the name of the calling macro.  Undefined
                  arguments are replaced by a null string.  `$#' is replaced
                  by the number of arguments; `$*' is replaced by all
                  arguments comma separated; `$@' is the same as `$*' but all
                  arguments are quoted against further expansion.

     defn(name, ...)
                  Returns the quoted definition for each argument.  This can
                  be used to rename macro definitions (even for built-in
                  macros).

     divert(num)  There are 10 output queues (numbered 0-9).  At the end of
                  processing m4 concatenates all the queues in numerical order
                  to produce the final output.  Initially the output queue is
                  0.  The divert macro allows you to select a new output queue
                  (an invalid argument passed to divert causes output to be
                  discarded).

     divnum       Returns the current output queue number.

     dnl          Discard input characters up to and including the next
                  newline.

     dumpdef(name, ...)
                  Prints the names and definitions for the named items, or for
                  everything if no arguments are passed.

     errprint(msg)
                  Prints the first argument on the standard error output
                  stream.

     esyscmd(cmd)
                  Passes its first argument to a shell and returns the shell's
                  standard output.  Note that the shell shares its standard
                  input and standard error with m4.

     eval(expr)   Computes the first argument as an arithmetic expression
                  using 32-bit arithmetic.  Operators are the standard C
                  ternary, arithmetic, logical, shift, relational, bitwise,
                  and parentheses operators.  You can specify octal, decimal,
                  and hexadecimal numbers as in C.  The second argument (if
                  any) specifies the radix for the result and the third
                  argument (if any) specifies the minimum number of digits in
                  the result.

     expr(expr)   This is an alias for eval.

     format(formatstring, arg1, ...)
                  Returns formatstring with escape sequences substituted with
                  arg1 and following arguments, in a way similar to printf(3).
                  This built-in is only available in GNU-m4 compatibility
                  mode, and the only parameters implemented are there for
                  autoconf compatibility: left-padding flag, an optional field
                  width, a maximum field width, *-specified field widths, and
                  the %s and %c data type.

     ifdef(name, yes, no)
                  If the macro named by the first argument is defined then
                  return the second argument, otherwise the third.  If there
                  is no third argument, the value is NULL.  The word "unix" is
                  predefined.

     ifelse(a, b, yes, ...)
                  If the first argument a matches the second argument b then
                  ifelse() returns the third argument yes.  If the match fails
                  the three arguments are discarded and the next three
                  arguments are used until there is zero or one arguments
                  left, either this last argument or NULL is returned if no
                  other matches were found.

     include(name)
                  Returns the contents of the file specified in the first
                  argument.  If the file is not found as is, look through the
                  include path: first the directories specified with -I on the
                  command line, then the environment variable M4PATH, as a
                  colon-separated list of directories.  Include aborts with an
                  error message if the file cannot be included.

     incr(arg)    Increments the argument by 1.  The argument must be a valid
                  numeric string.

     index(string, substring)
                  Returns the index of the second argument in the first
                  argument (e.g., index(the quick brown fox jumped, fox)
                  returns 16).  If the second argument is not found index
                  returns -1.

     indir(macro, arg1, ...)
                  Indirectly calls the macro whose name is passed as the first
                  argument, with the remaining arguments passed as first, ...
                  arguments.

     len(arg)     Returns the number of characters in the first argument.
                  Extra arguments are ignored.

     m4exit(code)
                  Immediately exits with the return value specified by the
                  first argument, 0 if none.

     m4wrap(todo)
                  Allows you to define what happens at the final EOF, usually
                  for cleanup purposes (e.g., m4wrap("cleanup(tempfile)")
                  causes the macro cleanup to be invoked after all other
                  processing is done).

                  Multiple calls to m4wrap() get inserted in sequence at the
                  final EOF.

     maketemp(template)
                  Like mkstemp.

     mkstemp(template)
                  Invokes mkstemp(3) on the first argument, and returns the
                  modified string.  This can be used to create unique
                  temporary file names.

     paste(file)  Includes the contents of the file specified by the first
                  argument without any macro processing.  Aborts with an error
                  message if the file cannot be included.

     patsubst(string, regexp, replacement)
                  Substitutes a regular expression in a string with a
                  replacement string.  Usual substitution patterns apply: an
                  ampersand (`&') is replaced by the string matching the
                  regular expression.  The string `\#', where `#' is a digit,
                  is replaced by the corresponding back-reference.

     popdef(arg, ...)
                  Restores the pushdefed definition for each argument.

     pushdef(macro, def)
                  Takes the same arguments as define, but it saves the
                  definition on a stack for later retrieval by popdef().

     regexp(string, regexp, replacement)
                  Finds a regular expression in a string.  If no further
                  arguments are given, it returns the first match position or
                  -1 if no match.  If a third argument is provided, it returns
                  the replacement string, with sub-patterns replaced.

     shift(arg1, ...)
                  Returns all but the first argument, the remaining arguments
                  are quoted and pushed back with commas in between.  The
                  quoting nullifies the effect of the extra scan that will
                  subsequently be performed.

     sinclude(file)
                  Similar to include, except it ignores any errors.

     spaste(file)
                  Similar to paste(), except it ignores any errors.

     substr(string, offset, length)
                  Returns a substring of the first argument starting at the
                  offset specified by the second argument and the length
                  specified by the third argument.  If no third argument is
                  present it returns the rest of the string.

     syscmd(cmd)  Passes the first argument to the shell.  Nothing is
                  returned.

     sysval       Returns the return value from the last syscmd.

     traceon(arg, ...)
                  Enables tracing of macro expansions for the given arguments,
                  or for all macros if no argument is given.

     traceoff(arg, ...)
                  Disables tracing of macro expansions for the given
                  arguments, or for all macros if no argument is given.

     translit(string, mapfrom, mapto)
                  Transliterate the characters in the first argument from the
                  set given by the second argument to the set given by the
                  third.  You cannot use tr(1) style abbreviations.

     undefine(name1, ...)
                  Removes the definition for the macros specified by its
                  arguments.

     undivert(arg, ...)
                  Flushes the named output queues (or all queues if no
                  arguments).

     unix         A pre-defined macro for testing the OS platform.

     __line__     Returns the current file's line number.

     __file__     Returns the current file's name.

EXIT STATUS
     The m4 utility exits 0 on success, and >0 if an error occurs.

     But note that the m4exit macro can modify the exit status.

STANDARDS
     The m4 utility is mostly compliant with the IEEE Std 1003.1-2008
     (``POSIX.1'') specification.

     The flags [-dgIot] and the macros builtin, esyscmd, expr, format, indir,
     paste, patsubst, regexp, spaste, unix, __line__, and __file__ are
     extensions to that specification.

     maketemp is not supposed to be a synonym for mkstemp, but instead to be
     an insecure temporary file name creation function.  The change causes no
     known compatibility issues.

     The output format of tracing and of dumpdef are not specified in any
     standard, are likely to change and should not be relied upon.  The
     current format of tracing is closely modelled on gnu-m4, to allow
     autoconf to work.

     The built-ins pushdef and popdef handle macro definitions as a stack.
     However, define interacts with the stack in an undefined way.  In this
     implementation, define replaces the top-most definition only.  Other
     implementations may erase all definitions on the stack instead.

     All built-ins do expand without arguments in many other m4.

     Many other m4 have dire size limitations with respect to buffer sizes.

AUTHORS
     Ozan Yigit <oz@sis.yorku.ca> and Richard A. O'Keefe
     <ok@goanna.cs.rmit.OZ.AU>.

     GNU-m4 compatibility extensions by Marc Espie <espie@cvs.openbsd.org>.

FreeBSD 11.0-PRERELEASE        October 21, 2010        FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | SYNTAX | EXIT STATUS | STANDARDS | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=m4&sektion=1&manpath=FreeBSD+9.3-RELEASE>

home | help