Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
LOCON(3)	       MBK LOGICAL STRUCTURE DEFINITIONS	      LOCON(3)

NAME
       locon - mbk logical connector

DESCRIPTION
       The  locon is used to describe a	connector of the logical view	  of a
       figure. Connectors are describing the cell interface, and are the  link
       between its physical and	logical	views, so the names must be the	same.

       The  declarations  needed  to work on locon are available in the	header
       file "/labo/include/mlo404.h", where '404' is the actual	mbk version.

       The following C structure supports the description of the logical  con-
       nector :
	      typedef struct locon {
		 struct	locon	  *NEXT;
		 char		  *NAME;
		 struct	losig	  *SIG;
		 void		  *ROOT;
		 char		  DIRECTION;
		 char		  TYPE;
		 struct	ptype	  *USER;
	      }	locon_list;

       NEXT		   Pointer to the next locon of	the list.

       NAME		   Name	of the connector. It identifies	the connector,
			   so it should	unique in a given  logical  figure.  A
			   logical  connector  with a given name correspond to
			   the physical	connector or connectors	of this	name.

       SIG		   Pointer to the signal linked	to the connector. This
			   signal  is, of course, unique. See losig(3) for de-
			   tails.

       ROOT		   Pointer to the object it belongs  to.  This	object
			   may be either a lofig, or a loins, depending	on the
			   type	of the connector.  See lofig(3)	and loins  for
			   details.

       DIRECTION	   This	 indicates  the	 way  of the information going
			   through the connector.  Six directions are legal :

			   IN		       input

			   OUT		       output

			   INOUT	       input and output

			   UNKNOWN	       no information is available

			   TRISTATE	       tristate	output

			   TRANSCV	       tristate	output and input

       TYPE		   Character indicating	if the connector belongs to  a
			   model or an instance. It can	take two values	:

			   EXTERNAL	       for figure connectors

			   INTERNAL	       for instance connectors

			   The	TYPE  is  needed to appropriatly cast the ROOT
			   field,  and	must  be  approriatly  filled  by  the
			   parsers.  A	misuse	of it may cause	strange	behav-
			   iours.

       USER		   Pointer to a	ptype list,  see  ptype	 for  details,
			   that	is a general purpose pointer used to share in-
			   formations on the connector.

SEE ALSO
       mbk(1),	mbk(3),	 addlocon(3),  getlocon(3),   dellocon(3),   losig(3),
       ptype(3), loins(3), lofig(3).

ASIM/LIP6			October	1, 1997			      LOCON(3)

NAME | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=locon&sektion=3&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help