Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
LOADER.CONF(5)		    BSD	File Formats Manual		LOADER.CONF(5)

NAME
     loader.conf -- system bootstrap configuration information

DESCRIPTION
     The file loader.conf contains descriptive information on bootstrapping
     the system. Through it you	can specify the	kernel to be booted, parame-
     ters to be	passed to it, and additional modules to	be loaded; and gener-
     ally set all variables described in loader(8).

     The file /boot/loader.rc must contain the following two lines for
     loader.conf to be automatically processed:

	   include /boot/loader.4th
	   start

     If	no /boot/loader.rc exists at installworld time,	one with the above
     lines will	be installed.

SYNTAX
     Though loader.conf's format was defined explicitly	to resemble
     rc.conf(5), and can be sourced by sh(1), some settings are	treated	in a
     special fashion. Also, the	behavior of some settings is defined by	the
     setting's suffix; the prefix identifies which module the setting con-
     trols.

     The general parsing rules are:

     +o	 Spaces	and empty lines	are ignored.

     +o	 A # sign will mark the	remainder of the line as a comment.

     +o	 Only one setting can be present on each line.

     All settings have the following format:

	   variable="value"

     Unless it belongs to one of the classes of	settings that receive special
     treatment,	a setting will set the value of	a loader(8) environment	vari-
     able. The settings	that receive special treatment are listed below. Set-
     tings beginning with "*" below define the modules to be loaded and	may
     have any prefix; the prefix identifies a module.  All such	settings shar-
     ing a common prefix refer to the same module.

     exec	   Immediately executes	a loader(8) command. This type of set-
		   ting	cannot be processed by programs	other than loader(8),
		   so its use should be	avoided. Multiple instances of it will
		   be processed	independently.

     loader_conf_files
		   Defines additional configuration files to be	processed
		   right after the present file.

     kernel	   Name	of the kernel to be loaded. If no kernel name is set,
		   no additional modules will be loaded.

     kernel_options
		   Flags to be passed to the kernel.

     password	   Provides a password to be required by check-password	before
		   execution is	allowed	to continue.

     verbose_loading
		   If set to "YES", module names will be displayed as they are
		   loaded.

     *_load	   If set to "YES", that module	will be	loaded.	If no name is
		   defined (see	below),	the module's name is taken to be the
		   same	as the prefix.

     *_name	   Defines the name of the module.

     *_type	   Defines the module's	type. If none is given,	it defaults to
		   a kld module.

     *_flags	   Flags and parameters	to be passed to	the module.

     *_before	   Commands to be executed before the module is	loaded.	Use of
		   this	setting	should be avoided.

     *_after	   Commands to be executed after the module is loaded. Use of
		   this	setting	should be avoided.

     *_error	   Commands to be executed if the loading of a module fails.
		   Except for the special value	"abort", which aborts the
		   bootstrap process, use of this setting should be avoided.

DEFAULT	SETTINGS
     Most of loader.conf's default settings can	be ignored. The	few of them
     which are important or useful are:

	   bitmap_load
		     ("NO") If set to "YES", a bitmap will be loaded to	be
		     displayed on screen while booting.

	   bitmap_name
		     ("/boot/splash.bmp") Name of the bitmap to	be loaded. Any
		     valid bitmap path can be used.

	   kernel    ("/kernel")

	   loader_conf_files
		     ("/boot/loader.conf /boot/loader.conf.local")

	   splash_bmp_load
		     ("NO") If set to "YES", will load the splash screen mod-
		     ule, making it possible to	display	a bmp image on the
		     screen while booting.

	   splash_pcx_load
		     ("NO") If set to "YES", will load the splash screen mod-
		     ule, making it possible to	display	a pcx image on the
		     screen while booting.

	   userconfig_script_load
		     ("NO") If set to "YES", will load the userconfig data.

	   vesa_load
		     ("NO") If set to "YES", the vesa module will be loaded,
		     enabling bitmaps above VGA	resolution to be displayed.

FILES
     /boot/defaults/loader.conf	 default settings -- do	not change this	file.
     /boot/loader.4th		 defines the commands used by loader to	read
				 and process loader.conf.
     /boot/loader.conf		 user defined settings.
     /boot/loader.conf.local	 machine-specific settings for sites with a
				 common	loader.conf.
     /boot/loader.rc		 contains the instructions to automatically
				 process loader.conf.

SEE ALSO
     boot(8), loader(8), loader.4th(8)

HISTORY
     The file loader.conf first	appeared in FreeBSD 3.2.

AUTHORS
     This manual page was written by Daniel C. Sobral <dcs@FreeBSD.org>.

BSD				April 18, 1999				   BSD

NAME | DESCRIPTION | SYNTAX | DEFAULT SETTINGS | FILES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=loader.conf&sektion=5&manpath=FreeBSD+4.11-RELEASE>

home | help