Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
LDAPMODRDN(1)		    General Commands Manual		 LDAPMODRDN(1)

NAME
       ldapmodrdn - LDAP rename	entry tool

SYNOPSIS
       ldapmodrdn  [-V[V]]  [-d	debuglevel]  [-n]  [-v]	 [-r] [-s newsup] [-c]
       [-f file] [-M[M]] [-x]  [-D binddn]  [-W]  [-w passwd]  [-y passwdfile]
       [-H ldapuri]  [-P {2|3}]	 [-e [!]ext[=extparam]]	[-E [!]ext[=extparam]]
       [-o opt[=optparam]] [-O security-properties] [-I] [-Q]  [-N]  [-U auth-
       cid] [-R	realm] [-X authzid] [-Y	mech] [-Z[Z]] [dn rdn]

DESCRIPTION
       ldapmodrdn  is  a  shell-accessible interface to	the ldap_rename(3) li-
       brary call.

       ldapmodrdn opens	a connection to	an LDAP	server,	 binds,	 and  modifies
       the RDN of entries.  The	entry information is read from standard	input,
       from file through the use of the	-f option, or  from  the  command-line
       pair dn and rdn.

OPTIONS
       -V[V]  Print  version info.  If -VV is given, only the version informa-
	      tion is printed.

       -d debuglevel
	      Set the LDAP debugging level to debuglevel.  ldapmodrdn must  be
	      compiled with LDAP_DEBUG defined for this	option to have any ef-
	      fect.

       -n     Show what	would be done,	but  don't  actually  change  entries.
	      Useful for debugging in conjunction with -v.

       -v     Use verbose mode,	with many diagnostics written to standard out-
	      put.

       -r     Remove old RDN values from the entry.  Default is	 to  keep  old
	      values.

       -s newsup
	      Specify  a  new superior entry. (I.e., move the target entry and
	      make it a	child of the new superior.)  This option is  not  sup-
	      ported in	LDAPv2.

       -c     Continuous operation mode.  Errors  are  reported,  but ldapmod-
	      rdn will	continue  with	modifications.	  The  default	is  to
	      exit after reporting an error.

       -f file
	      Read  the	 entry	modification  information from file instead of
	      from standard input or the command-line.

       -M[M]  Enable manage DSA	IT control.  -MM makes control critical.

       -x     Use simple authentication	instead	of SASL.

       -D binddn
	      Use the Distinguished Name binddn	to bind	to the LDAP directory.
	      For SASL binds, the server is expected to	ignore this value.

       -W     Prompt for simple	authentication.	 This is used instead of spec-
	      ifying the password on the command line.

       -w passwd
	      Use passwd as the	password for simple authentication.

       -y passwdfile
	      Use complete contents of passwdfile as the password  for	simple
	      authentication.

       -H ldapuri
	      Specify  URI(s) referring	to the ldap server(s); only the	proto-
	      col/host/port fields are allowed;	a list of  URI,	 separated  by
	      whitespace or commas is expected.

       -P {2|3}
	      Specify the LDAP protocol	version	to use.

       -e [!]ext[=extparam]

       -E [!]ext[=extparam]

	      Specify  general	extensions  with -e and	modrdn extensions with
	      -E.  '!' indicates criticality.

	      General extensions:
		[!]assert=<filter>    (an RFC 4515 Filter)
		!authzid=<authzid>    ("dn:<dn>" or "u:<user>")
		[!]bauthzid	      (RFC 3829	authzid	control)
		[!]chaining[=<resolve>[/<cont>]]
		[!]manageDSAit
		[!]noop
		ppolicy
		[!]postread[=<attrs>] (a comma-separated attribute list)
		[!]preread[=<attrs>]  (a comma-separated attribute list)
		[!]relax
		sessiontracking[=<username>]
		abandon,cancel,ignore (SIGINT sends abandon/cancel,
		or ignores response; if	critical, doesn't wait for SIGINT.
		not really controls)

	      Modrdn extensions:
		(none)

       -o opt[=optparam]

	      Specify any ldap.conf(5) option or one of	the following:
		nettimeout=<timeout>  (in seconds, or "none" or	"max")
		ldif_wrap=<width>     (in columns, or "no" for no wrapping)

       -O security-properties
	      Specify SASL security properties.

       -I     Enable SASL Interactive mode.  Always  prompt.   Default	is  to
	      prompt only as needed.

       -Q     Enable SASL Quiet	mode.  Never prompt.

       -N     Do not use reverse DNS to	canonicalize SASL host name.

       -U authcid
	      Specify  the authentication ID for SASL bind. The	form of	the ID
	      depends on the actual SASL mechanism used.

       -R realm
	      Specify the realm	of authentication ID for SASL bind.  The  form
	      of the realm depends on the actual SASL mechanism	used.

       -X authzid
	      Specify  the  requested authorization ID for SASL	bind.  authzid
	      must be one of the following formats: dn:_distinguished name_ or
	      u:_username_

       -Y mech
	      Specify  the  SASL  mechanism  to	be used	for authentication. If
	      it's not specified, the program will choose the  best  mechanism
	      the server knows.

       -Z[Z]  Issue StartTLS (Transport	Layer Security)	extended operation. If
	      you use -ZZ, the command will require the	operation to  be  suc-
	      cessful.

INPUT FORMAT
       If  the	command-line  arguments	dn and rdn are given, rdn will replace
       the RDN of the entry specified by the DN, dn.

       Otherwise, the contents of file (or standard input if  no  -f  flag  is
       given) should consist of	one or more entries.

	   Distinguished Name (DN)
	   Relative Distinguished Name (RDN)

       One or more blank lines may be used to separate each DN/RDN pair.

EXAMPLE
       Assuming	that the file /tmp/entrymods exists and	has the	contents:

	   cn=Modify Me,dc=example,dc=com
	   cn=The New Me

       the command:

	   ldapmodrdn -r -f /tmp/entrymods

       will  change  the RDN of	the "Modify Me"	entry from "Modify Me" to "The
       New Me" and the old cn, "Modify Me" will	be removed.

DIAGNOSTICS
       Exit status is 0	if no errors occur.  Errors result in a	non-zero  exit
       status and a diagnostic message being written to	standard error.

SEE ALSO
       ldapadd(1),  ldapdelete(1), ldapmodify(1), ldapsearch(1), ldap.conf(5),
       ldap(3),	ldap_rename(3)

AUTHOR
       The OpenLDAP Project <http://www.openldap.org/>

ACKNOWLEDGEMENTS
       OpenLDAP	Software is developed and maintained by	The  OpenLDAP  Project
       <http://www.openldap.org/>.  OpenLDAP Software is derived from the Uni-
       versity of Michigan LDAP	3.3 Release.

OpenLDAP 2.6.2			  2022/05/04			 LDAPMODRDN(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | INPUT FORMAT | EXAMPLE | DIAGNOSTICS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ldapmodrdn&sektion=1&manpath=FreeBSD+13.1-RELEASE+and+Ports>

home | help